Jump to content
HybridZ

myplasticegg

Members
  • Posts

    181
  • Joined

  • Last visited

About myplasticegg

  • Birthday 09/08/1987

Contact Methods

  • AIM
    myplasticegg

myplasticegg's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Find a way to put a porsche trans on it and throw it in the hatch... Last thing you want to do is have to pull the engine to change plugs/wires, etc... I've got a SF5 forester and I absolutely hate doing anything to it that involves the heads.
  2. I've got one out of car already. LMK what it's worth to you and i'll grab some pics of the inside.
  3. Welcome back to PA! I'm about an hour up 81, I'll have to head to M/D next time you head to the test and tune. Have a good one! Shane
  4. I've got a stocker off of an 83 ZXt for $50.+shipping (I can get it to philly if you can pick it up)
  5. http://forums.hybridz.org/showthread.php?t=132247
  6. The intake gets a good amount of heat soak; I would go with putting it in the intake stream before the TB. As for the CTS, I used a carbed T'stat housing and drilled(9/16) and tap(3/8 NPT) on a flat spot near the stock gauge sensor. If you're using a stock EFI t'stat housing, drilling/tapping the stock ECU location should work just fine, just be sure that the t'stat can move without catching on the sensor.
  7. http://www.turbododge.com/forums/f4/f19/122372-holset-oil-feed-lines.html
  8. why not try to find an adapter with a t-stat if you're going out of your way to put an after market one on. http://flyinmiata.com/index.php?deptid=4533&parentid=0&stocknumber=04-37310++1994-05
  9. I used it in my DOHC saturn from time to time. Kept it from running like a two stroke. good stuff; gets expensive if you have to feed it in as gas/oil(the saturn used a quart every 1k...)
  10. Has the flow testing taken place?
  11. are those pine needles or crunch spots on the Porsche?? If they're out in the snow, they're out all year round. those interiors will be tripe in no time.
  12. What about removing the anti-sway bar and lifting it up? I would think the anti-sway bar would make a difference... They are putting force on the A arms and those are directly connected to the strut towers. just a thought. On the other hand, if it is that bad out of whack, you might want to get it checked out?
  13. That seems like a whole lot of work to really do nothing. Doesn't seem all that safe... I'm a Tech Ed major and would not want one of those in the classroom.
×
×
  • Create New...