Some key points about MFactory and their Helical LSD.

•     Mfactory established in 2004
•     Covered by the MFactory Lifetime, Globally Transferable Warranty
•     Diamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel (imported Japanese SAE 4320 & SAE 9310 Steel)
•     Forged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness
•     Advanced Shot Peening technology increases surface hardness
•     Designed to withstand the extreme shock loads of competition-level Drag Racing
•     Advanced gear geometry designed using industry-leading software puts more power to the ground
•     Only the highest quality Brighton-Best Hardware is used
•     Maintenance-free Gears eliminates the need for special fluids & rebuilds associated with plate-type LSDs (I personally use AMSOIL Severe Gear 75w-90)
•     Lock-free operation ensures no adverse affect to steering response

MSRP: $999.95

Limited HybridZ member price: $875 shipped to lower 48. (CA residents must pay sales tax) All differentials are shipped from CA via UPS and have signature required delivery. Supplies are limited right now so act fast!

If you are interested please PM me with your shipping address and PayPal Email address. Once we receive that information from you we can send you a payment request on Paypal. All orders are shipped same day (Mon-Fri not including holidays) if payment is received by 4:30PM EST (1:30PM PDT)

Any questions please feel free to email me at nick@jdmpowerhouse.com, reply to this post, or shoot us a PM.

MFactory contact info.

581 W. Covina Blvd
San Dimas, CA 91773

(MFactory R&D / North American Sales & Distribution)

Business Hours: Mon-Fri 7.30am - 4pm (PST)
Tel: +1 909-592-5933
Fax: +1 213-455-2613
Web: www.teamMFactory.com

Comes with uprights that bolt up to off the shelf 2004 neon srt4 coilovers and a cradle kit for the super 8.8 diff.

Brakes, bolt on hub, donor cv axle parts and diff all off a 2015 mustang. 5x114.3 bolt pattern.

2014 brakes will work for some 15 inch wheels and will bolt up with 5/16 caliper spacers that can be ordered extra or can make your own.

Kit is currently in many many cars.  If you have questions i would be happy to answer them.

Fully welded kit is all I'm currently selling.  1600 plus shipping.

Complete assembled axles are 1100 plus shipping.

Feel free to ask questions, also can accommodate special requests within reason.

for mine I mounted it in a carbon fiber center section so I also can include the stands to offset the air vent and a cut template to utilize.

Started off making the steel brackets to use the wilwood mechanical spot calipers (120-2280,2281) I made the brackets and mocked everything up. I was unable to figure out a way to stop the calipers from rattling (I hate rattles) so I scrapped that idea and decided to make a new set using wilwood's new MC4 mechanical parking brake calipers.

Made from 6061 aluminum, they are much lighter than my original steel design.

My brake hats are JSK hats which have a 24.5mm offset so the brackets should work with other kits that run the same offset.

I made the first set for myself, and am happy with the way they turned out. Would anyone else be interested in a set?

This will work just like it has in the past and I am using the same screen printing shop. The T shirt options have changed to a different brand, but I asked them to keep the style/quality as close as possible. Our order minimum is 36 pieces, so I will take orders for two weeks after we hit that threshold. I'll do my best to ship orders as soon as I get shirts, but please don't expect Amazon Prime level service from me. I'm just a guy with toddlers and a job doing this on my lunch breaks 😅

T shirts are printed on Next Level Apparel cotton/poly blend to keep them soft and long-lasting. 

https://catalog.companycasuals.com/p/11021_Charcoal#?doScrollToGrid=true

Lady's Ts are the same 

https://catalog.companycasuals.com/p/11022_Charcoal#?doScrollToGrid=true

Sweatshirts remain on the Gildan 50/50 cotton/poly blend

https://catalog.companycasuals.com/p/115_DarkHthr#?doScrollToGrid=true

Pricing is the same as it was 6 years ago for T shirts and hoodies have only gone up $3. 

T shirts - $25/ea

Hoodies - $37/ea

XXL +$2

XXXL + $3

Shipping is $9 for a single T shirt and $17 for anything else via USPS flat rate. 

*** ORDERING INSTRUCTIONS - PLEASE READ *** 

1) Please post in this thread the quantity you're ordering and your zip code for shipping. Remember to check the size charts and color options at the product links!!! IF I DON'T GET A SPECIFIC COLOR REQUEST IN YOUR ORDER I AM ASSUMING YOU WANT A BLACK SHIRT! Printing looks best on dark colors, so order other colors at your own risk. Some of the less common colors can run into backorder issues. 

2) I will PM you with the total (including shipping), and my Paypal address (Paypal ONLY).

3) Transfer the funds, with your real name, username, and shipping address. If I cannot match a real name to a screen name, I will not ship.

4) I will take orders until we hit our minimum threshold and then for two weeks longer. After that period I will place an order at the screen printer. Once all merchandise is in hand I will ship as soon as possible. All orders must be paid in full to make it on the list, no exceptions! If you don't want to wait any longer a full refund is available all the way up until I place the order with the screen printer. 

Previous buys:

Round 1 - http://forums.hybrid...als-order-here/

Round 2 - http://forums.hybrid...thread-round-2/

Round 3 - http://forums.hybridz.org/topic/119702-hybridz-apparel-order-thread-round-3/

Round 4 - https://forums.hybridz.org/topic/127777-hybridz-apparel-order-thread-100-of-profits-will-be-donated-round-4/

We have been cooking here at Vintage Carbon! We are going to be coming out with an ALL NEW Carbon Fiber S30 Grill! To our knowledge, this will be the First Ever Carbon Fiber Grill made for the Datsun S30 Platform!

We are going to incorporate the Thick Outer Border similar to the Fairlady 432 Style Grille, while keeping the OEM "V" shape and OEM style straight across Slats all made completely of Carbon Fiber!! The slats will be thicker so you can really see the Carbon Weave from the front. We are also going to extend the overall height about 3 inches to make sure it covers as much as possible with a front air dam installed. We are going to ensure the vents are spaced equal to OEM so air flow will not be affected. It will be different from anything out there, more aggressive yet reminiscent of OEM but made of Carbon Fiber right here in So Cal, USA!! These will really add style to any S30 Z Front End!!

What do you guys think? We will be accepting pre-orders for a heavy discount off Retail cost for the first 10 people.

Contact me if interested! Message me or Email me at andrew@zociety.org !

We are currently working on a high quality render as we speak! Hoping to have that ready by the end of this week.

What I need is someone who can test these for me starting in mid-June. That means you must have the Subaru diff in hand (or can get one quickly) and have a running, driving, reliable car that can put some street and track miles on it in a short time. That's a tall order but you'll get to keep these side axles if you follow through and send me feedback, pictures, and measurements.

Last round things took longer than expected to get rolling to hit the minimum order needed, so keep that in mind. For this round I'll be taking orders as we get them. Payment is due at the time of the order. Once we hit the minimum I'll continue taking orders for 1 week and then place the order with the screen printer. If at any time you don't want to wait any longer your order will be refunded immediately. 

100% of all profits here go straight back to HybridZ!!!

The T-shirts are printed on American Apparel brand 50/50 cotton/polyester blend shirts. These are some of the most comfortable shirts around and the 50/50 blend helps them to hold up for years without fading. Most custom printed shirts seem to be done on cheap haynes brand T's, and I wanted to avoid that here. This is something that's comfortable to wear and that's going to last a long time!

Also available are hooded sweatshirts and longsleeve T-shirts. The longsleeves are also printed on American Apparel (100% cotton), and the hoodies are on Gildan brand material since AA doesn't offer a sweatshirt. I went through and picked a nice quality hoodie at the shop that's doing the printing, and you guys will not be disappointed with them!


Here's some pics from the last run and the proof I received from the print shop showing the final design on the shirts.

Right click and click "open image in new tab" to view larger!

Pricing is as follows:

Short sleeve t-shirts - $25
Long sleeve t-shirts - $29
Hoodies - $34

XXL is +$2 for each item. 

Shipping:

T-shirt = $7.25

Anything Else = $14.00

All shipping is via USPS Priority Flat Rate. 2-3 day delivery in most of the US. International shipping is available.

Know your sizes guys!

American Apparel shirts are known to run small; Gildan is pretty true to size.

Right click, "open image in new tab" to see them bigger!

American Apparel Sizing:


Gildan Sizing:



Color options:

IF I DON'T GET A SPECIFIC COLOR REQUEST IN YOUR ORDER I AM ASSUMING YOU WANT A BLACK SHIRT! If you chose some other color and the printing looks like crap on it, I'm sorry, but can't do anything about it.

The logo was designed with a black shirt in mind. That being said, it looks on dark colors like a dark heather gray (my favorite) or navy. I wouldn't suggest getting any light colors or a red shirt.

Short sleeve colors for S-XXL:
https://www.alphabro...r=BB401&q=bb401

Long sleeve colors:
https://www.alphabro...?sr=2007&q=2007

Sweatshirt colors:

https://www.alphabro...5&currentColor=

Short Sleeve Colors for XXXL only:

http://www.companyca...41&parentId=625


*** ORDERING INSTRUCTIONS - PLEASE READ *** 

1) Please post in this thread the quantity you're ordering and your zip code for shipping. Remember to check the size charts below!!! IF I DON'T GET A SPECIFIC COLOR REQUEST IN YOUR ORDER I AM ASSUMING YOU WANT A BLACK SHIRT! If you chose some other color and the printing looks like crap on it, I'm sorry, but can't do anything about it. 

2) I will PM you with the total (including shipping), and my Paypal address (Paypal ONLY).

3) Transfer the funds, with your real name, username, and shipping address. If I cannot match a real name to a screen name, I will not ship.

4) I will take orders until we hit our minimum threshold and then for one week longer. After that period I will place an order at the screen printers and should have all of the finished products within 7 business days. Once all merchandise is in hand I will ship within 48 hours. All orders must be paid in full to make it on the list, no exceptions! If you don't want to wait any longer a full refund is available all the way up until I place the order with the screen printer. 

Previous buys:

Round 1 - http://forums.hybrid...als-order-here/

Round 2 - http://forums.hybrid...thread-round-2/

Round 3 - http://forums.hybridz.org/topic/119702-hybridz-apparel-order-thread-round-3/

https://m.youtube.com/user/Neubs260

He's got a boatload of great tech videos from SU carb tuning to vintage 240z gauge modifications and everything in between.  His information may be a bit basic for those with tons of experience working on these old Datsuns, but I've found his channels and website super helpful so just speading the knowledge!

Cheers!

-Tom

Finally a Beautifully Tig welded Aluminum Intake Manifold For the L-Series motors. With a choice of 75/ 90mm Throttle body and Fuel Rail. We have been researching and devoloping this behind the scenes it is a very well thought out piece that has function and form combined.

Link to store with full details (75mm intake set)

Follow us on our Facebook and Instagram by giving a like to stay up date with new product development and sales.

now check out sweet shots!! More on our social media pages Link

Books are available for $35 with free shipping to the lower 48 states by PayPal at parallax.randy.lewis@gmail.com

https://www.ebay.com/itm/S30-240Z-260Z-280Z-2JZ-GTE-2JZGE-1JZGTE-Engine-Swap-Kit-OverkillZ-Crossmember-/114024685783?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0

Gram -Mike321go 

Mill try to get better of checking my inbox here too.

Harness's are custom made for each individual setup and will take 1-2 weeks to complete. It includes all new plugs, fuses, relays , wires , loom and components. The harness is designed for ms2 compatible Nissan 280zx turbo 82 83 distributor OR 300zx/maxima/pathfinder Distributor I am also an authorized Megasquirt Dealer I could get any other system or product!

HARNESS $ 750

Megasquirt 1, 2 or 3 L series drop in harness Harness + Relay/Fuse box will be $750 will include:

- 6x EV1 sealed injectors plugs quick disconnect

- 1x GM coolant temp sensor with amp sealed plug

- 1x GM air temp sensor with amp sealed plug

- 1x ms2 friendly Throttle Position sensor with sealed plug

- 1x ms2 friendly Crank Angle Sensor with plug OR l28et distributor input ( you supply plug )

- Fuse Relay box: Labelled with fuses for fuel pump, coil, ecu, 2x injectors banks. With 2 spare connections for wideband / boost controller.

- 16 ft power to fuel pump 

- Main Power to battery with fuse connectors, 8ft ground for relays, 8ft switched power for relays. (crimped and soldered)

Harness is made from

 AMP METAL DB37 clamshell connector

- You choose ECU placement or Fuse/Relay Box some people like fusebox next to battery and ECU inside passenger firewall. Or both near each other

- All connection are crimped and soldered for optimum connection and longevity.

- GXL wiring (heat and oil resistant)

- Up  to 12ft length at no extra charge

- labelled every 3 inches

- relay/fusebox can handle 6 relays and 6 fuses (typical install uses 2 relays which leaves you with 4 additional for headlight upgrade, fan etc. and 4 fuses and leaves you 2 spare) 

- fuse/relay box is detachable from harness that way you can pass it through on either end.

- extra FIDLE, IAC 1A, 1B, 2A, 2B outputs included

Additionally I can also setup a MS2 ECU to make this a complete turn key system!

MS2 ecu $ 467

config $ 200 hardware+software configured (includes basetune which $100 goes to ChickenMan for his efforts) at the moment 260cc injectors /440cc/480cc also we will cover NA tunes.

extras options available

Wideband input,Fan control, Methanol Control, 4 cylinder harness, 8 cylinder harness, trigger wheels for CAS  ecu panel mount custom length wires. Mega squirt hardware assembly.   PM for extra options and more info.

Iam also a authorized re seller of all Megasquirt products, 14point7 wideband/data logging systems and HDI boost controllers/intercoolers/gauges/clamps.

If you need more info please look at this old thread or PM me . 

Around 4 years ago I discovered that nobody was marketing reasonably priced s-steel exhausts so I set to it. 

I've sold modestly into Europe since and developpped and evolved the goods until now I feel confident to sell to a larger and more distant market.

In the range currently are :

1 3/4" primary pipe Full-race header : $799

1 5/8" primary pipe Race-sport header : $661

1 5/8" primary pipe Street-sport header : $537

Full 2.5" exhaust line with standard rear muffler : $559

JDM twin-exit rear muffler : $160

I'm looking at less expensive methods of shipping, currently $380 (tracked and insured) for a header and exhaust (with standard rear muffler) and JDM rear muffler.

I'll be very happy to answer any and all questions and I'll be posting up some tech speak for us geeks that love talking numbers !

Best regards,

Sean

Lightest on the market not forgetting that 'light is right' !

 5% off the parts' price for the first 50x orders*.

 *8x firm orders already placed as at Independance Day.

US$260

£212

CAN$358

AUS$381

 Kits so far are :

 front and rear bars

front bar only

New nuts and washers for the strut tops front and/or rear

 Price list in multiple currencies attached.

 Later, new front and rear caps will be available for S30s and S130s along with a bar kit for the S130s.

RetroSeats.com is proud to offer a beautifully made high quality FRP Shell lightweight Retro Bucket seat with a removable head rest design.

Most of you are familiar with this design as it was originally used in the Skyline GTR's and Datsun Fairlady Z race cars in the late 60's and early 70's.

They are currently available in limited quantities and offered in a variety of center section patters/designs.

Price is $489.95 + $24.95  Shipping for the PAIR (2). - Limited Quantities NOW IN STOCK.

Direct Link To Seats

These seats offer great cornering support and will add the final touch for an incredible Retro looking interior.

If you have any questions, please feel free to email us at Info@retroseats.com

Visit us | www.RetroSeats.com

In the 60's Datsun made a replica of the Smiths RVI tachometer under licence.

These tachometers were current triggered and besides now dying from old age, tend not to work with electronic ignition or ECUs.

Since 2003 we have been making and selling kits to replace the electronics of these tachos

We also fit the kits for people without the time, confidence or skill to fit the kit.

There are two version of the kit, one fits inside the case, the other is slightky easier to fit and sits in a box beside the tachometer.

Both are triggered by coil / square wave ECU output  / or alternator "W" terminal

the internal kit fits on the existing bolt holes on the movement and allows calibraton from outside the case.

The first two kits are appropriate for the Smiths based tacho   Link to Spiyda Tacho Page

Chris

Spiyda Ltd.

I don't know if you know me but my name is Mike Garcia and I am owner/builder of the Overkill Z. Years ago when I was building my car while searching for an engine mount for my S30 I came across John Coffey here on HybridZ. After looking at the other options I instantly felt his was the best designed and strongest option. I bought one and used it in my build. We became friends but missed the opportunity to buy the cross member JIG before his passing.

However fait has a funny way of working.... I recently moved to Southern California when I saw the Jig was up for sale down in San Diego. I made the 4 hour round trip the next day and bought the Jig with the sole purpose of making the cross members for the community.   

I am one guy with a Jig and the resources to REPRODUCE these cross members Just as John designed! These will be MADE TO ORDER and will be low production numbers to insure a QUALITY product.

So Just as I came across John you have now come across me. They will come as raw metal for ease of welding with the original instructions. YES these can be bolted in by drilling holes through the rails and cross member.

Price $350 a unit plus shipping to your door step. Happy building!

These are made for OEM 2jzgte engine mounts. People have used These for 1jzgte,vvti,GE swaps but may of had to swap out mounts. The 4bolt pattern is the same however the mount brackets vary. 

Message me for orders.

Instagram----- Mike321go

Facebook----- Mike Garcia