Have anyone here bought anything from Patrick Reynolds?

From a Facebook page called "Datsun spare parts for sale and swap?

Regards

Hey everyone!  I am sorry I haven't been on HZ in so long!  I am still actively selling the gauges, it's been some time since I've been on here, but I am still selling gauges.  PLEASE let me know you found me via Hybrid Z, and I will continue to donate.  I still work at the same shop, so the information is STILL the same!

-Steve

Hey guys, I know I'm relatively new to the boards, I am a new Z owner and I see a lot of people looking to purchase the Speedhut gauges. At my company we are becoming a Speedhut gauge dealer, and right now we're offering a discount on their gauges!

For instance, what seems to be the most popular is the Revolution 4" with turns and high beam indicator:

I can also sell the gauge kits they offer on their website for a bit cheaper also.

PM me what you're looking for, payment can be taken via Paypal (though if you paypal, it will have to go through my personal) or you can call me and I can do card over the phone.

If you're interested, either email, call, or post on the thread, and I can definitely see what I can do on pricing. The first initial batch of gauges will go out at the beginning of next month, and if popular enough, I would like to run this group buy for a month. The more gauges you order, the deeper the discount!

The shop I work for
our information is
3310 E. Veterans Memorial BLVD
Killeen, TX 76543
www.krmotorsportsonline.com
254-680-3308
http://www.facebook.com/KRMotorsports?ref=hl

EFFECTIVE IMMEDIATELY! 08/05/2017 1% OF PROFITS WILL GO DIRECTLY TO KEEPING HYBRIDZ UP AND RUNNING!!!! 

There's a bit of a thread on it and the installation is over [url=http://www.zdriver.com/forums/280zx-brakes-wheels-suspension-chassis-81/rear-sub-frame-suspension-mods-35966/]here[/url]

Here's Byron's 510 kit. Build thread is [url=http://www.the510realm.com/viewtopic.php?f=10&t=6946&hilit]here[/url] and the install thread is [url=http://www3.telus.net/byron510/meston_motorsports_003.htm]here[/url]

If anyone is interested in a kit please post to this thread!

------------------------------------------------------------

Hey Jeff,

Yeah , we can do one, but we need a STOCK cast manifold or a sample

of a broken , or cracked manifold to make a jig out of.

We would also want someone to help make it so it would have

good appeal to the masses.

What we do in cases like this - if you want to do something like this

is (2) fold.

A) We get the part made, and you test fit it, make sure it is correct

with no issues.

you can organize a group buy on your forum, and we can drop ship to

your customers

C) we can create an Alias name - so you can have the item tagged with a

" D.B.A " name.

This usually takes about 6 months from start to finish, but it can be

rewarding for both parties.

((** as long as there is more than 20 people who want a manifold or

manifold/dp combo ** )

Thanks

Joe

SSA CS

SERVICE@SSAUTOCHROME.COM

> Hello,

>

> In the old Datsun 2X0z (Nissan) world we are using the 2.8L

> 280ZX turbo motors in our cars.

>

> Is there any plans to make a turbo header for this older

> motor? Can there be?

>

> If you check out www.hybridz.org there is a whole world of

> people using this motor.

>

> Thanks,

> Jeff

EDIT: Update - Pricing is $750 for a set of four shipped any where in the continental US. If you pickup in Hayward, it is only $700. These wheels will be setup to clear a stock suspension, but will most likely (almost 100%) require flares or fender rolling. I am working on determining the size that fits at the moment and will be making cardboard wheels in a 245/40, 255/40, and 275/40 size. The rears should fit 275/40 no problem. The fronts may need to step down to 255. We shall see. This will help me to determine an offset that works.

If you are interested and willing to jump on this, please express it. Suggestions on sizing are welcome as well. Images are in the link above.

LIST OF GROUP BUYERS (Needs 25):

1. Rudypoochris - Chris Moris - chrismoris@gmail.com

2. DSommer - David Sommer - dsommer479@yahoo.com

3. Sparkynacho - xxxxxx - sotoa01@yahoo.com

4. Rev240z - xxxxxx - bcproperties1@comcast.net

5. Panachedk - Adam O'Lena - amolena@uwm.edu

6. Streeteg - xxxxxx - Eguidice@hotmail.com

7. Dreco - xxxxxx - dreco@sbcglobal.net

8. Cowboy510- xxxxxx - coyboy510@hotmail.com

9. Cowboy510- xxxxxx - coyboy510@hotmail.com

10. DemonZ - xxxxxx - louho@hotmail.com

11. Shoryuuu - xxxxxx - shoryuuu@yahoo.com

12. Bjhines - xxxxxx - jwhines3@nc.rr.com

13. White_rice - xxxxxx - old_skool_rice@yahoo.com

14. Memc - xxxxxx - mfraserjr@gmail.com

 Original post  I just happened to complete a full plug and play ms2 system was wondering if there was interest in doing some more seeing as FricFac is not doing any more . I can make them for the less cost and will include much more. Allot of hours has been put into this harness and will clearly show pictures don't do it justice. To make this worth while I would need 3-5 to start.

The Essential harness will be $400 It will include:

- 8-10ft harness color  now 12 ft minimum coded with diagram , ignition input shielded for noise cancellation, 1 wire end to end not a hack job. all new plugs and sensors

- 6x EV1 sealed injectors plugs quick disconnect

- 1x GM coolant temp sensor with amp sealed plug

- 1x GM air temp sensor with amp sealed plug

- 1x ms2 friendly Throttle Position sensor with sealed plug

- 1x ms2 friendly Crank Angle Sensor with plug OR l28et distributor input ( you supply plug )

-  loom supplied

new

- lowered price from$ 490 to $400

- AMP DB37 METAL clamshell connector

- GXL wiring (heat and oil resistant)

- 12ft length at no extra charge! ( shorter length and custom layout available  )

- labelled every 3 inches

- extra FIDLE, IAC 1A, 1B, 2A, 2B wires

The Full Package Harness + Relays + Fusebox will be $750 will include:

- Everything from Essential Harness

- Main and Fuel pump Relays

- Fusebox: Labelled with fuses for fuel pump, coil, ecu, 2x injectors banks. With 2 spare connections for wideband / boost controller.

- 16 ft power to fuel pump and 10ft power to coil (crimped and soldered)

- Main Power to battery with fuse connectors, 8ft ground for relays, 8ft switched power for relays. (crimped and soldered)

- NOTE LAST 4 OPTIONS I could connect , crimp and solder everything. OR  just include and label the obvious reason being placement of ECU is different for everyone

- plenty of loom supplied

- new

- AMP DB37 METAL clamshell connector

- GXL wiring (heat and oil resistant)

- 12ft length at no extra charge! ( shorter length and custom layout available  )

- labelled every 3 inches

- new relay/fusebox can handle 6 relays ie fan(s), lights, etc with 6 FUSES typical install uses 3-4 leaves 2 spare wideband , boost gauge etc

- extra FIDLE, IAC 1A, 1B, 2A, 2B wires

extras options available

4 cylinder harness, 8 cylinder harness, trigger wheels for CAS  ecu panel mount custom length wires. Mega squirt hardware assembly.   PM for extra options and more info.

The largest tire you can fit on a 240Z is a 245/40/17 with rolled fenders with a 17x8.5 +4 rim. I've seen it and it looks great. I reached out to racing18 and they don't not carry this option right now, but they can put in an order if there are 5 or more parties.

What do you guys think?

(picture credit to Lunar240z)

The large Datsun for the BACK of A jacket is 10" X 7" $16.00

The small Datsun for FRONT 4.25" X 3" $8.00

Okay this is the way I'm going to set it up.

Specify:

(quantity wanted) x FRONT

(quantity wanted) x REAR

SAMPLE ORDER: I want 1 FRONT and 2 REAR.

Also, I'm checking into getting some HybridZ patches made to go along with Datsun patches. Another thing is if there is enough interest I will look into making Datsun HybridZ Jackets. If you are interested in group buy let me know on the forum. If you are interested the Jackets PM about details.

Tyson

EFFECTIVE IMMEDIATELY! 08/05/2017 1% OF PROFITS WILL GO DIRECTLY TO KEEPING HYBRIDZ UP AND RUNNING!!!! 

I've designed and built several Mega Squirt harnesses for various Datsun projects. I'm an Electronics Engineering Technologist so I've designed these harnesses for optimal noise immunity with high grade wiring to provide you with a highly reliable backbone for your Mega Squirt EFI system. Electronic noise can cause all sorts of gremlins in your system. To eliminate these issues all harnesses are configured with a robust grounding system as well as shielded cabling for all sensors. The wiring is heat and chemical resistant to provide you with years of trouble free use. EV1 connectors for the injectors use the quick disconnect plugs for ease of installation and removal – no more fighting with wire clips.

The basic harness is designed to plug into the stock sensors and injectors found on a stock L28ET engine. This includes the injectors, 82-83 dizzy with optical encoder wheel (allows the use of stock or custom encoder wheels), TPS (after market – stock is a throttle position switch – MS requires a throttle position sensor which is a potentiometer rather than a switch), CHTS, Knock sensor (wired to main connector but not hooked up – MS requires extra hardware for the knock sensor), ignition coil, IAT (after market – stock IAT is built into the AFM but should be removed due to air restriction – MS uses a MAP sensor so the AFM is not required) and WBO2 sensor and power. Connectors for the IAT, TPS and WBO2 will vary from installation to installation so the buyer can provide their own connectors for installation during the build of the harness or install them on the prepped associated cabling. Spares can be run for extra power, etc as requested.

You can add a relay/fuse block assembly to the basic harness. One will provide power for an ignition enabled fuse panel which will provide fused power for the MS ECU, injectors, ignition coil, WBO2 and fuel pump as well as spares for additional power nearby the ECU. The second relay provides ECU control and powers the fuel pump. This can be configured to plug directly into the stock body wiring harness on the 280ZX and control the stock fuel pump using the stock fuel pump wiring if requested. This eliminates the optional diyautotune relay and relay harness and gives you addtional fuses for your WBO2 and igntion coil as well as a spare. The diyautotune assembled relay board and relay board harness is $179. Custom assembly is $150.

Optional custom cabling such as COP/CNP distributorless wiring is also available. Typically the connectors will be installed with filter caps in close proximity to the COP/CNP connector to eliminate back EMF from the coil discharge and integrated into the harness. Custom lengths and spacing for connectors can be built to the buyer’s specification.

Basic harness is $550. Basic customization is also included in this price. Additional cost for extra sub harnesses such as the COP/CNP is typically about $300. I can also build and test your MS 2/3/3x ECU and load a base tune. This will allow the buyer to plug in the harness and ECU and get the car up and running (provided the car is mechanically functioning correctly) with minimal fuss. A proper dyno tune is highly recommended for optimal performance.

Our number one priority is to provide you with a high quality product based on your needs. We will design your system based on your specific application so we often have several discussions with our customers to iron everything out. We're happy to answer your questions about building a system wether you're purchasing from us or not so feel free to ask and we'll do our best to help you out.

But I had this cap made for my trigger wheel and CNP/COP setup. So I wanted to test the waters to see is anyone else would like to have these made. Seen them in the past for over 200 each I would have these made for around 150, would take a week or two to be made. Also would need the washer in the dizzy that the rotor attached to be machined down (shown in photo) I had this done for a lower profile.

As I said this is a test to see what kind of interest this would gather among the z guys. Thanks for looking.

I am working on a 240z swap using the R200. It is very hard finding a R200 with the LSD. Pursuing other products on the market to achieve the open diff. to an LSD is not only expensive, purchasing a Quaife but is not practical installing a Phantom Grip or the conversion from Traction Concepts. The later products in my opinion will never handle the stress needed to achieve the horse power most of us want. I personally would like to have a great LSD installed one time and forget it. So I will get to the point. I have contacted MFactory. At this time they do not carry an LSD for the R200. But, if there is enough interest and I want to stress serious interest. They will begin the process of development and manufacturing the helical LSD. With initial talks the unit will be at least on the average of $300.00-400.00 less than the Quaife and still have a lifetime warranty. For those of you not familiar with MFactory, here is a link for you to read about their products and how they are made.
http://www.teammfactory.com/helical-lsd for information on their helical LSD’s

Serious interest post below so we can start a list.

1.exlifesaver*PAID*
2.LLave*PAID*
3.hcarrickz3 *PAID*
4. yahz *PAID*
5.konradlip *PAID*
6.Chris Duncan *PAID*
7.hcarrickz3 (2nd LSD) *PAID*
8.MidnightCafe *PAID*
9.Medic8 *PAID*
10.makaofox *PAID*

As of now, I am NO LONGER offering group buy with Rota.  Their sheer lack of customer support has hindered us from getting wheels because I am a smaller dealer.  I have a few orders in now, and cannot get a hold of anyone over there!  As those who have already placed orders with me, know that I have been trying to get in touch with them to either place orders (meaning I haven't even paid them), or get updates on orders (that have already been paid).  I don't know what kind of company that doesn't even want to take orders!  This is seriously making me very angry, and in the many years of being in business, I don't see how these guys even survive.  

For future buyers, unfortunately if they don't shape up very quick, then I will no longer offer these wheels.  

Hey guys,

I just became a dealer for Rota, and MST Wheels. 

Is there any interest in wheels?  Unlike my other group buys, I must have a few sets ordered before I can complete.

So I'm just gauging interest on (if anyone) wheels?

The MST and Rotas are SEPARATE.  So In order for it to work, I would have to have enough orders on one or the other.  Let me know!

EFFECTIVE IMMEDIATELY! 08/05/2017 1% OF PROFITS WILL GO DIRECTLY TO KEEPING HYBRIDZ UP AND RUNNING!!!! 

So just this week they have given me good news and are willing to make me a set.

Now this is something that will be done for a short while so I am trying to see if there is any more interest to help bring down the price.
They are supposed to get back to me tomorrow with a Retail price they will create and a discount level. They estimate it to be around $2000-$2200 retail for seat and I am shooting for $1800 for the group buy.

Hope I am not violating any rules by gauging interest. Either way I will be ordering my seats soon.

Feedback will be appreciated.

I'm offering a 10 % discount it does require a 50% deposit.

Please call or email for details.

A friend of mine has been building these knock lights that work really, really well.  They are programmable, to use ANY knock sensor.  The only down side of this unit is that you have to wire in your own knock sensor, and you have to do some testing on it.  Not a big deal.  It comes with everything you need including the the USB cable for programming.

It comes with 5-6 ft of shielded wire ready to go as well too.  

Features:

LEDs to show intensity of the knock

It has a HEADPHONE jack (my favorite feature.  One wire to the knock gauge, and the other in to the Aux in of a radio).

It supports both digital and analog out.

He sales these units at 109 a pop, but obviously there is a discount as units sell.  

But I just wanted to gauge interest to see if anyone else would be interested.

We have LED Sequential Tail Lights IN STOCK for:

240Z Red Lens (USD)

240Z Amber Lens (JDM)

260Z

280Z

The pricing for the kits is $359 including reverse and low current flashers. The hybridz price is 10% off.

If you are interested, please PM me with your email and what kit you want or email us at info@dapperlighting.com with the same info.

Let me know if you have any questions. Once these kits go into distribution, the group buy will deactivate (maybe a week or two).

Thanks!

Ben

BRE 240Z is ready to go! Taking orders now! Same price, same deal as below!

02/18/16 Thank you for all your support and interest guys. 

Here's a little sneak preview of what's next:

BRE Datsun 240Z in it's original livery - print on aluminum. Gauging interest right now, so let me know if anyone's up for one! Pricing will be the same.

01/23/16 Since the minimum number of orders has been achieved and a few orders are coming in through my online store, i'm replacing the sign up list with a counter of how many prints remain out of the 30 initially available. Some of you guys have already received your prints, i'm real happy to hear you like the work!! Your support is greatly appreciated!! Please keep in mind, the price is only good till 1/31.

240ZG G-Nose Aluminum print - 22 pieces remain

240Z narrow body, short nose print - 26 pieces remain

01/18/16 Orders starting to ship. Tracking info provided via PM for the orders that have gone out. Don't hesitate to post your photos!

01/15/16 Initial 5 orders are at the printers. Shipping and tracking info will be provided early next week. 

01/15/16 Initial batch of orders is being processed and sent to the printers. Please don't forget to provide me your address and whether you'd like a gloss or matte finish on the print. Thank you!

01/14/16 Ladies and gents, we have reached the minimum required number of participants to go through with the printing process. Those who have reached out to me showing interest, please check your inbox for payment instructions so I can go ahead and place the orders with the printer. Thank you guys!

Hi guys,

I'd like to extend the opportunity to purchase some of my automotive artwork via a group buy, at a discounted rate. My latest illustration is a Datsun 240ZG that is printed on a sheet of brushed aluminum. The beauty of this process allows you to actually see the texture of the brushed aluminum, where typically you would see any white color on a paper on canvas print. The piece measures 2 feet by 8 inches tall, and comes with a wooden mount that allows you to mount it directly to any wall. You also have the option of selecting either a matte or glossy finish to the whole print.

I have worked out a deal with my printer that allows me to offer a discounted rate on an order of 5 pieces or more.

Price
My regular price for this piece is $120 shipped within the Continental US. The Group Buy price is $84.99 shipped to your door. I can only offer this deal until January 31st of this year and a minimum of 5 orders is required by my printer. The print is limited to 30 pieces.

Payment
Once the required number of interested parties is reached, I will be reaching out to you with my paypal information.

Production time and shipping
Once payment has been received, the printing and shipping process takes roughly 6-10 combined. Tracking information will be provided.

if you have any questions please feel free to post them here or pm me.

I hope you like my work and thanks for your time!

-dennis







you can really see the aluminum texture shine here:





sign up list:

1. BluDestiny PAID
2. NgoZ PAID
3. Pre-order made outside HybridZ. PAID
4. Huy350Z PAID
5. Arif PAID

Sign Up for Narrow Body, Short Nose:

1 RB26powered74zcar PAID

2 theatriks PAID

3 NgoZ PAID

Sign up for BRE 240Z - orders shipped once payment is processed - ~2-3 days.

1.  Pre-order made outside HybridZ. PAID

2.  Pre-order made outside HybridZ. PAID

SS reproduction gas tank straps for 240Z.

Will not fit the 280Z.....working on it.

$75.00 USD plus shipping by Canada Post unless otherwise requested. Please note, a tracking number will not be available with Canada Post. I will need you ZIP or Postal code to calculate.

As promised, 10 sets are available for immediate shipping. More will be available over the next couple of weeks.

First come first serve so if you are interested leave a message on this thread indicating you are pm..ing me. It will reserve a spot in the line up. Then send me you postal code and I will calculate shipping for you, then I will send you my Paypal address and total owing.

http://forums.hybridz.org/showthread.php?t=147761

Thanx!!

: