Jump to content
HybridZ

Leaderboard

Popular Content

Showing content with the highest reputation on 02/05/21 in all areas

  1. Realize I am late chiming in here, but what the heck. What Grannyknot said is correct, and right on the money. The metal directly above the rear view mirror is critical. I don't know if you are planning to do any of the work yourself but if so I would strongly suggest taking the car to a trusted body shop and have them put the car on a frame machine and having the roof straightened as best possible BEFORE ANY SHEET METAL IS REMOVED! Do not cut anything without having this done first! The right side A-pillar will come back to its correct position if the shop knows what they are doing. Think of it this way- the roof was bent as a welded structure, therefore it needs to be "unbent" as a welded structure as much as possible BEFORE any metal is cut off. Get it as straight as possible, then remove the skin only, then replace the center middle section (if you have to) and go from there. And for what it is worth, the skin will only need to be welded at the A pillars and just above the quarter glass where it meets the quarter panels. Ask the shop to use panel adhesive on the sides. Easier for them and every bit as strong as welding it. Its basically the industry standard now for replacing roof skins in the auto body industry. Just my two cents from 30 years of being a bodyman for a living. Good luck, its totally repairable.
    1 point
  2. The VQ37 to my knowledge doesn't have good support with full standalone, and simply would not require it unless someone wanted to go for insane power, at which point I really think there are better platforms (LS anyone?). But the VQ37 with flashed stock ECU's also picks up more torque gains across the rev range than other VQ's. So for mild builds the potential to make pretty high N/A power is substantial with all the standard stuff that ought to be done in a swap (custom intake/exhaust/modified ECO with the security disabled, etc). We used ZFever to modify the stock ECU for this service. I too was just wanting responsive high power motor that is relatively light, and reliable to thrash on. We should be over 400 bhp on this build but will do a custom tune before it is back on the road. Still lots of little shit to do. I will say that this swap is more of a pain than doing an LS, but I think in the end, since I have no intentions to sell the car for a long time to come, its important to get what you want, based on your own values and how you intend to drive the car.
    1 point
×
×
  • Create New...