Jump to content
HybridZ

280zedxt

Members
  • Posts

    17
  • Joined

  • Last visited

Posts posted by 280zedxt

  1. Good day all.

     

    Not sure if i read this here on hybrid or not, but i have pictures

    I found reference to a different blower motor upgrade for our beloved s30's

    Using the motor from a 1999 kia sportage (and yes it comes with the fan cage/hamster wheel, if bought new) and very minor trimming to the metal motor housing,

    It fits with no rubbing, also unlike the original, it flush mounts to the housing so no spacers and you can reuse the original screws.

     

     I'm not taking credit, just sharing something i stumbled across on the web, which i did myself and now i'm sharing.

     

    And yes I it moves lots of air

     

    20150219_123008.jpg20150219_123030.jpg20150219_123058.jpg20150219_123845.jpg20150219_124830.jpg

  2. I know this is an old thread, but I'd like to add that the walbro or any fuel injection pump for that matter is a fuel pusher Not a fuel puller

    your problems would have been solved quicker and sooner by mounting the injection pump at the rear of the car by the fuel tank which is also the stock location for the pump on any injected car

     

    I write this to inform, because reading it concerned me about the walbro pumps, which is what i'm using on my zx turbo

    and when mounted properly its a great pump

  3. Hey mark I've had this problem twice, both of my zx's past and current

    the problem lies with the 30 year old electric oil pressure sender it leaks

    where the two prongs are for the plug, because all it is metal crimped around plastic

     

    the quick fix i've used both times silicone or 2 part epoxy, whatever i had at the time works like a hot damn

    and if you want to buy a new one be ready to spend close to a 100 bucks, that's near what i was quoted about 4 years ago

     

    and the easy way to see if this is your problem pull the boot off that protects the connector if there's oil there's your leak

     

    PS, take the sender off and clean in really well if you want what ever you use to seal it to stick

×
×
  • Create New...