Jump to content
HybridZ

tybaldo

Members
  • Posts

    22
  • Joined

  • Last visited

About tybaldo

  • Birthday 06/26/1984

tybaldo's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. my cam was one tooth out of time. but it still have a like missfire in idle. same missfire i have before i rebuild the engine. what can it be ?
  2. finally got it running. the distributor shaft was out of place, but now she's loping dont know why, i already readjust the valve nad retorque the head. any inputs?
  3. the red circles are where i want to cut the fuel rail. and the red line on the bottom is what i want to keep. would it make a difference
  4. do you mean the air regulator, because i removed it. seconde my dizzy is a 81 turbo. the other night i toke the front cover out and adjust the timing and now i got backfire cpming from the emergency relief valve. how come!!!! don't knoiw what to do .
  5. linec you are saying that i can just cut off the xtra piping from the fuel rail to make it shorter and it will be fine. correct me if im wrong?
  6. would abad tps cause a no start. and how do i know if the tps is bad or good.
  7. would it make a difference if a make my stock 280zx fuel rail shorter. i need input.
  8. i try what you told me but still no start. any other suggestion!!!
  9. thnax i ll try that and i ll let u know what happen. yes its smell like fuel on the tail pipe. i already check my timing and my spark plug and they are firing nice and strong.
  10. hey... i got a problem after i finish rebuilding my engine a put it back in the car, i plug every connector where they suppouse yo go, i have spark, distributor is timed, got fuel, and im getting power to all my electronics. What could be the problem. engine crank and cranks but no start. Please help. i need to get it running before the end of this month
  11. does anyone have any links to a pulley set for a l28et? if anyone konws please let me know, i will be appreciated
  12. why? because i believe i can make a lot more of power out of that conversion. i read a lot of people already done it and i want to be the next one to do it, specially when here where i live no one have never seen something like it
  13. what other engine dohc cylinder head fit the l28et rather than the os heads? im real serious about make an l28et dohc no joke please need feedback
  14. can i fit this head on a l28et? im just wondering
×
×
  • Create New...