ZAMMM

How much for the fender? Im not worried about the paint as it will have to be painted anyways. Shipping should be just over $100 I would say

WTB: drivers side fender Z:1976 280z Name: Mel Steves Location: St. Petersburg FL Number: 239-404-5501 Email: Melspace02@aol.com Payments: Paypal or cash in hand Let me know what you have. Thank you

Very Nice!!!!

I have recently installed a new aluminum 3 row rad and also a new water temp sensor and noticed that the car is running hotter. I noticed that the old water temp sensor was nasty with build up but Im also wondering if there is a proper way to bleed the coolant system on this car. Its running almost about 3 quarters on the temp gauge which I would believe would be hotter than 200 degrees with the a/c off. When I installed the radiator I used a 50/50 mix and also added a small amount of water wetter. I let the car idle until it was warm with the heat valve pushed to the hottest setting with the fan off and also had the rad cap off to check for bubbles. Any direction would be greatly appreciated. Thanks

I recently purchased a new thermo time switch from MSA thinking it was the reason it would take my z 1 to 3 cranks to start sometimes. Since I have installed the new thermo switch it has improved a little but some times I will have to crank it twice or it will crank the first time but takes 3-4 seconds to fire. I have noticed it to start sooner in the morning and harder while after driving or when its hot out.I also have noticed since installing the switch if it takes 3 times to start it doesnt sound flooded or fart when it finally fires up. Any direction would be greatly appreciated.

I need a thermo time switch that works.

bump

Bummer.... I do plan on down the road doing the autometer gauges. Till then I guess im stuck with a light out.

Looking for some random parts for my 76 280z.. Let me know what you have and how much shipped zip code 33710 Drivers window door trim Lock knob Rear hatch datsun logo in excellent shape Door sill carpet hold down.. Im missing it and it looks bad without it Hood stick holder.. Mine is broke Rear trim that cover rear lights. Mine is cracked Door window crank Chrome door handle trim Also looking for an air dam.. Thanks

My speedo gauge light is out and the po put a dash cap on the car. Is there a way to change the bulb without removing the whole dash now? I can move the gauge once I remove the screw but due to the dash cap it will not pull out. Thanks in advanced

I am thinking about getting a ebay champion radiator cause there affordable and look decent. Do I need a 3 row or will a 2 row cool fine. I have a l28et on a stand right now and plan on doing a efan conversion once I get the turbo motor in. I also live in FL and do not plan on having AC in the car when I do the swap. Just seeing if I need the 3 row or not from your experiance

Does he have a user name? Im curious on how rare this cover is, ive never seen one and I know its old

Can someone move this to General non-tech. My bad, im a newbie around here