[280Z Heater Core Alternatives]

I did the summit alternate heater also. Works great if you just want a heater.

I made a frame out of 1 1/2 alum angle 

and bolted it to the firewall and dash right above the radio. 
Good luck!

[Wiper upgrade with a universal 3 position switch]

I searched and could not find any information on wiring up an upgraded Honda wiper motor and using a universal 3 position switch. I have the Speedway wiring harness and could not get 

the stock wiper switch to work so needed an alternative. This worked for my 75 280z. 

You'll need :

30/40 Amp Relay

Inline fuse 30 amp

Universal 3 position switch

 

[Hard wire wiper motor]

Need some help trying to wire up a Honda Accord wiper motor without using the column switch.

I see a lot about how to wire using the stock wiring but not much on making it work with an separate switch. It’s for my 75 280z. Most of the links I click on cannot be opened or are expired.

I’d like to use a 3 way aftermarket switch.

Any help will be appreciated.

Thanks

[Alternative gas tanks]

I’m looking for alternate gas tanks for my 75 280z that will use the stock filler. I see some Jeep tanks and camaro

gas tanks. Anyone have pictures of their set up?

thanks

[Alternator wiring]

Looks like that wire is just to show the alternator is charging. I could the solder in a resistor and connect that to a new dash light. 

 

Thanks

 

[Alternator wiring]

Need a little help with the signal wire. I see you need to add a resistor but where does it go from there? The harness is from speedway motors. I have the main wire to the starter along with the positive battery cable.

 

Sorry  if this has been asked before but I can’t find it.

 

 

thanks

[Hooker headers]

Has anyone tried the hooker cast iron headers? Are there any options other than the Sanderson? I'm using dirty dingo mounts and 700r4 tranny.

Thanks

[Ls oil pan]

I used a camaro oil pan from Rock auto and pickup tube , wind age tray. Nice low profile. Much cheaper.

[Oil pressure sensor]

Which oil pressure sensor should I use? It's for 4.8 and I'll be running a carb. Will a stock one work to also act as a fuel pump cutoff? I know for a gen 1 small block you use the Chrysler set up.

[Fuel tank]

I have a 240z tank and do not see any ports for fuel in or out. I see all of the vent lines but nothing else. Any idea of what I have and how to make it work?

[C6 Corvette Oil Pan]

Ok so now I'm even more confused on which oil pan to use. Putting a 4.8 l and will be going with a 700 r4 tranny. It's going in my 75 280z. Probably JCI mounts unless anyone can suggest a better set up. Looks like there are several oil pan options? F body , GTO, corvette. What's everyone running?

[27 spline stub axle]

Thanks for all the responses. I have one now

[27 spline stub axle]

Thank you

[27 spline stub axle]

Don't know what happened to the first post.. Anyway need some help finding 27 spline stub axle. Buggered up the threads when changing the bearings. Anybody have a source at a reasonable price?

Thanks

[Dash replacement 75 280z]

Looking for help with dash. Just have the metal frame. Can the full dash cap be placed directly to the metal or do you have to cover over an existing dash?

[Gas tank]

If you're going to continue the Spare tirewell delete, then you can fit a tank from a Mini Cooper (internally baffled and internal fuel pump) then you'll have space on both sides to run dual exhaust. (I think the cooper tank is only 11.6 gal tho)

Thanks haven't heard of that one before

[Gas tank]

A 75 tank is completely different shape than a 78 tank, and I believe the mounting of them. Can they be made to swap.... that's the trick I suppose.

Thanks for the heads up. It was a generous offer,great forum

[Gas tank]

You may be in luck. I'm cutting up a 78 280. Picked it up for a few pieces, the tank and spare tire are not parts I intend to keep. I'll be happy to cut out whatever you need and send it to you (for the cost of shipping, of course).

Thanks for the offer. I'm leaning more to finish the cut out and going with something else. The more I dig into the body I see more rust so I'll be doing allot of cutting and welding so may just go with camaro or something like that. The next big missing item is the dash....

[Gas tank]

Newbie this forum . Resurrecting a 75 280z and need some help with help with a gas tank. The previous owner started cutting out the spare tire well. It's

Pretty rusty also. Choices of repairing and then finding the right tank or continue the cut out and going with a different tank. I've seen so have used a tank from

A camaro. Any ideas will be appreciated