rookie z
-
Posts
44 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by rookie z
-
-
i have a complete engine & trans .if you want give me a call 205-368-4563
-
i dont know how far you want to drive ,but i have engine & trans .cylinder head re-worked 600 miles ago. give me a call 205-368-4563 ,ask for mike.
-
he will get it but it wont be from someone buying that car .he has to sale what ever he is smoking!!!!!
-
thanks everyone! it was the driveshaft hitting the sway bar.
-
which ,the ones on the axles or the drive shaft. the ones in the shaft are new,i know thats not saying much.
-
thanks , i will check that .never thought about that but i will let you know.
-
i changed the oil and its still making the noise.i used my electronic scope & it sounds more like the axles,not sure 1st time with a z.
-
thanks , i will try that and let you know.
-
just looking ,every thing seems to be ok .the car had been sitting about 10 years when i got it.
-
its coming from the diff. im sorry ,i thought i said that.
-
i have a 78 280z ,i just finished with ls1 swap .i thought everything was good until i backed out of my shop .i have a clicking or popping noise when backing up but no noise when going forward ,anyone have this problem.
-
i just wanted to thank everyone for helping me with my z.i am finished as far as for getting it running , now i can move on to the bodywork.thanks again!
-
i put the resistor in and it started charging , but by the time i went to check the voltage it stopped charging.i tried it 3 diffrent wires with the same results ,so do you guys think i should replace the alternator or rebuild it or what next?
-
should it be 12 volts?how about i splice a 12 volt wire into the connector .will that work?
-
i dont have power the connector.should i have power there or what?
-
i have the wire from the back of alt going to the + side of the battery but i dont have power going to the 1 wire connector on top of the alt.
-
i have a 98 ls1 i my 78280z .i am using the factory wiring harness.there is only 1 wire going to the connector on the alt,i cant get it to charge.what am i missing?
-
the pics were what i needed .i forgot about the connectors in the car .i had them taped up and tucked out of way.
-
thanks everybody i got it .
-
what connectors are those ? if that is for the coil ,mine are a diffrent color wires and all.
-
i have 12.5 volts and fuel but no power at the coils or at the injectors.the motor is turning over and i have checked the grounds and all of the sensors and i even added a ground strap .how do i get power to the ecm?i 'm sorry , no power to the pink wires and they are not hot when cranking.
-
i checked everything you said ,i even added a ground,still no spark
-
i know the crank sensor is plugged but where is the cam sensor. no spark at all , i dont have a scan tool
-
no fire to ls1 coils .i am using the factory gm harness and the ecu has been flashed. someone help
1973 240z V8 Conversion
in Gen I & II Chevy V8 Tech Board
Posted
what do you know about the ghetto?