Jump to content
HybridZ

exlifesaver

Members
 View Profile  See their activity

  • Posts

    16

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by exlifesaver

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    10 hours ago, Northern Z said:

    I'm interested if still available and do you ship to Canada

    Thanks

    LSD's still available, $949.99                      (Northern Z)

    Shipping and any custom fees you will have to pay.

    To get an estimate on shipping I will need your name and full shipping address

    Thank you for inquiring

    Chip

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    Dan

    The LSD has 10 and 12 mm bolts holes. Yes your "75 280Z is a 3.545

    The shims on either side of the open diff. are reusable on the MFactory. Just remember to put them back on the correct side. The shims could be different sizes by a small amount. Matter of fact when disassembling make sure whats on the right side of the diff goes back and same on the left side. Same with bearing caps and mark them with a marker as to the up position as they were removed.

    Thank you

    Chip

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    TurboDan

    Thank you for inquiring about the MFactory R200 LSD.

    Price is $925.00 shipped to the lower 48 states. I have one available at this time. Toward the end of June others will be available. I'm not sure about the numbers you are using . This is a Helical LSD. It's locked on acceleration and deceleration.

    your '75 280Z I believe has the 3.545 gearing 29 spline stub axles. If you can define the numbers you listed I may be able to assist you better. The ways numbers may be associated with clutch type LSD's maybe.

    Thank you

    Contact me any time.

    Chip

     

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    Hey

    Eds260z

    The 260z's had the 180 diff. The years you  were asking are from the 280 Z. From 1975 to 1978 there the R200 3.545 gear ratio.

    Those also took the 29 spline stub axles of which the MFactory LSD is also 29 spline.

    If you need more info contact me

    Chip

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    Will need full name and shipping address

    Unit is dropped shipped from California and shipped free with signature confirmation at your end.

    Email and Paypal addresses

    A payment request will be sent to you

    HybridZ members are offered the dicount price of $875.00.

    What type of Z are you upgrading?

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    Hey Tonythefish

    Not sure if you received my message back to you this morning. I think internet was going in an out.

    Anyways there are some MFactory R200 LSD's available now. When you think you are ready to order,

    There will be a few bits of info. I'll need from you. Other questions just contact me.

    Thanks

    Chip

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    I 'm not sure have both of these posts got hooked together

    But to answer yours Datsuns: Your asking about the fitment Of the MFactory R200 LSD into a 1984 280zx MT NA

    As I recall that vehicle comes with the open diff R200  3.9 gears and CV joints , 29 spline stub axles.

    Can I get a conformation on this info so far from you? Then I can proceed

    Chip

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    Hey Adam

    I take it you want information on the purchase of the MFactory LSD

    The price to Hybrid Z members is $ 875.00 Shipped to the lower 48 states.

    Calif. Addresses pay their sales tax

    If this is something your are interested in   contact me with

    shipping address and paypal address for payment

    A payment request will be sent to you

    All shipments require signature confirmation

    Thank you

    Chip

     

    MFactory R200 Helical LSD

    in Vendor's Forum

    Posted

    Hey DonH

    You can pickup from MFactory/Synchrotech in San Dimas

    I may have a better price than the factory especially with HybridZ members

    You would still have to pay Calif. Sales Tax but picking up is still ok. On the HybridZ forum

    MFactory R200 gives you all the information. The units are $875.00. Give me a reply

    regarding ordering or any other questions.

     

    Thank you

    Chip

×
×
  • Create New...