Jump to content
HybridZ

75280zguy

Members
  • Posts

    10
  • Joined

  • Last visited

About 75280zguy

  • Birthday 06/20/1989

75280zguy's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. well i have been putting off the z for months now to fix my other cars(sorry) but anyway the tank was really rusted inside and out got it cleaned with a new pump and shes finally on the road again but im having this slipping problem with my clutch but only when im starting out once im moving its fine and it doesnt grab till the pedal is almost all the way up gonna bleed the whole system but is there any thing alse it could be?? oh and it was a 4 speed converted to a 5 speed
  2. i need afuel level sending unit for my 75 280z it doesnt have to be in working order just need to plug the big hole in my tank for a temporary fix i live in aurora if anyone has one local or a close distance that would be awesomw .....thanks
  3. the pump was new when the car was parked and it seems to work but its kinda loud.Haven't put in the tank yet finishing my supra motor rebuild (buy the way the z is WAY easier to work on)
  4. well i think i got it i used a very high pressure rinse with the aid of some chemicals the inside is now spotless gonna install in a day or two ill let you guys know the results
  5. i just cleaned out out the tank and sure as ♥♥♥♥ it was full of crap.Does anybody know a good way to get it clean or where i can find a new tank cause im getting tired of just looking at it i want to drive!
  6. im on filter number 4 now it dies when it gets to temp i let the car sit for a minute then it fires right back up.I guess tomorow im droppin the tank thanks for the input guys never worked on a z or a car that has sat for so long
  7. i asked a couple of my car buddies and they said it almost sounds like a timing issuse as well as fuel. I was just out working on it when i noticed the nipple off the charcoal canister was broke and the line was just dangling its the one for my distributer. Since its vacum advance wouldnt that mean it not advancing like it should
  8. i have the same problem wtih my 75 the guy i bought it from said the arms in the door get bent supposedly it happened to this z and his old z i just bought the car and dont know much about them i havent had a chance to look yet but it seems like a good place to start
  9. i just recently bought a 75 280z from a friend it hasnt been daily driven for almost fifteen years.Okay the first couple of days i drove it ran surprisingly well for sitting for so long,but then it started to stall out and hesistate really bad when it got to normal operating temp it gets so bad i can barely drive it its almost like its running to lean.Its got a brand new fuel pump but the old filter i pulled out had really bad blockage changing it helped but it still does it im new to z's and dont know where to start any input would be appreciated ....sorry for the first post it was kinda vauge
×
×
  • Create New...