juxsa
-
Posts
92 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by juxsa
-
-
Over a year since I have updated the build. Got her painted and now I'm trying to figure out materials for the interior. You can't see it in the pictures because it's under a port but there is a blue pearl mid coat. I'm posting a link to some video so you can see it in the sun.
https://photos.app.goo.gl/7cvLLfhi1Bzyittv8
-
Those door cards are slick!
-
-
-
-
Thank you jonbill! Yeah I've got a 36-1 wheel with a ford escort 2 wire VR sensor with the signal wire shielded and in it's own harness. The coils are wasted cop in 3 banks of 2. in the next day or 2 I'm going to double check the continuity of the wires for the sensor and if that's good then i'm going to crack open the speedy and make sure that the jumpers are correct for VR.
-
On 2/17/2019 at 11:29 AM, jonbill said:
I've just finished a Speeduino 0.4.3c ignition only install on my car.
It uses a 36-1 crank damper trigger wheel and a TPS with a Bosch clone wasted spark coil pack and igniter setup.
Probably about £250 all in but could be done cheaper I'm sure.
What settings did you use to get spark? I'm not getting signal from the vr. I don't think I feel that we don't have the settings in tunerstudio correct.
-
Here are some pictures of custom fuel rail, wiring harness, coil pack, FPR and fuel filter goodness!!!
What I've got going on here is the coil packs, injectors, sensors...etc will have their own wiring harnesses that plug into the main harness so that if a few years down the road I want to do a motor swap or something else, I won't need to build an entire new harness.
-
Well even more progress has been made.Decided to stick with the L28 but got a great deal on a rebuilt F54 block with N42 head that has had some work done to it. unsure what kind of work but the cam towers have been shimmed. I got a DatsunWorks crank trigger wheel, LS coils, and my buddy is in the process of machining the fuel rail. I was thinking about running MEga Squirt but decided to try out Speeduino for the ECU. Enjoy the pictures
-
On 10/2/2018 at 10:42 PM, dogmeatk said:
How is the project going AkRev?
I am collecting parts for my Speeduino build this winter, still trying to figure out if I will be able to run semi-sequential off of just the distributor set up as a cam sensor.
I think you can if you use the diyauto distributor wheel insert but I think you have to have a ZX distributor for it to work. I ended up just getting this: http://datsunworks.com/page3/page4/
and will be using LS coils wired up for wasted spark and will wire up my injectors to fire the same as the coils.
-
On 7/31/2018 at 9:19 PM, Derek said:
Hi
I have the kits available. They are $220.00 plus shipping.
Here is a link to my web page that has all the details.
Thanks
Derek
PM'd ya
-
Anyone running this on a F54 crank pulley with a/c?
-
necro bump... so how are you liking the ported stock intake?
-
Just out of curiosity are these still being made? If not does anyone have a cad file for the design?
-
any updates?
-
My money is going to be fuel percolation. The carbs are getting hot and fuel in the carbs is boiling in the bowls
-
N/m I'm an idiot I figured it out
-
My friend has access to a CNC machine and can make me a 240sx throttle body adapter for my L28. Anyone have a file they can send me? Or if not anyone know what the measurements are so he can quickly program it? I was going to get the one from AZZcar but he's out of stock for the next 4-6 weeks
thanks!!!
-
-
Those look killer!!! Do they suffer from fuel percolation problems like the old round tops?
-
I scrolled through your build thread that looks killer. I may have missed it but were you able to keep the a/c compressor?
-
did you have to swap the 5.3 intake manifold and use an ls1 intake manifold?
-
What did zfever charge to modify the 370z wiring harness? I'm trying to decide if I'm going to do a vq35, vq37, or ls swap. With the ls I can likely do the wiring myself but with the vq I would just send it out to be modified
-
What are the differences between this style over the regular round top su?
'78 280Z resto mod
in S30 Series - 240z, 260z, 280z
Posted
Still slowly grinding away at it. I need to start ordering figuring out things for the interior and I'm hoping I can get the door locks and hatch lock rekeyed