///Mink
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by ///Mink
-
-
Hi all. I just removed the seats from my '72 240z (6/72) to reupholster them and found that they appear to be a mish-mash of seat parts from different years. Looking to the experts to confirm my suspicions.
I found that the seat bottoms have webbing instead of springs, which I thought ended in 1971. However, it also appears that my hinge/recline mechanism is correct for a '72. Finally, the seat studs had these black "spacers" on them between the rail and the mount on the floor. Are these original?
See attached photos. I appreciate any feedback.
-
I have 1, 2, 3 and 4 in the diagram if you need them.
-
-
Just guessing, but the CV shafts are probably worth more than the diff, if they have the right spline count for a Z R200. They're hard to find anymore. Measure the length and count the splines, somebody will probably take them. Call them 3x2 CV shafts.
Here's some ratios if you want to get closer to what car the diff came from. Good luck. By the way, you can't post a For Sale ad until you donate a few dollars. It's a site rule to keep out the scammers.
http://www.nissansilvia.com/forums/index.php?showtopic=337751
Thanks for the info! Not really looking for info in order to sell, just trying to figure out what I have on my hands. I may use the half shafts if I put an R200 in my project 240Z. Thanks again.
-
-
Assistance needed with 240Z seat ID
in S30 Series - 240z, 260z, 280z
Posted
So I discovered that the spacers are original. My new seat covers say 70-73 and the pads say 70-78 so I suppose I can just replace the webbing and call it good, even though it's not 100% correct for a '72.