Richs72RBz
-
Posts
80 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Richs72RBz
-
-
They are interchangeable. You can probably pick one out from the parts store. Nissan 300zx should work.
-
These is exactly what I was planning to do!
-
I'm still looking for these if anyone has them.
Bump!
-
Rich,
I have one also if you need.
Do you have the whole thing or just the mount?
-
Rich, I have several e-12 distributors that I have collected over the years. If your
still looking for a distributor with base mount let me know..
Rex
Yes bro I'm still looking for one if you have it. How much do you want for it? Shoot me a pm. Thanks!
-
I'm looking for a complete 79-81 280zx distributor and base mount. If you don't have a distributor and only have the base I will buy that by itself. Let me know what you got thanks.
-
You need to worry more about the core instead of the size. I've ran ebay, precision, and treadstone intercoolers and I can tell you that quality core makes a huge difference in air temps. I went from ebay to precision intercoolers and saw 20-30degrees difference in cooling. I'm running treadstone intercooler now as they are priced somewhere in the middle and the core is pretty decent.
-
Ahh yes, cannot wait to see it done @stevenxwin
-
I'm in on the raffle. How do I get in?
-
-
Please delete.
-
I'm on the exact same boat as you. I am also looking for a roller with the same description/condition as above. Also looking to spend about the same amount depending on condition. Hit me up if you got one. Lookitzrich@yahoo.com or 805 815 5275
-
Got bored last night so I made a video using the gopro software.
-
Are you sure? i just feel like with your mods you would probably be making more power then that.
You built an amazing car though, I hope mine can be that sweet when I'm done.
I'm limited with the turbo, I could make more If I had a bigger turbo but response would suffer. I'll probably try out the gtx3076r next.
-
Wow nice video. What kind of power and mods are you running?
Have not had it strapped on a dyno yet, but its probably around low to mid 400s at the wheels.
Sounds good.. Details?
Rb25 built bottom, tomei pon cams gt3076r aem ecu and pretty much every supporting mods.
-
I was trying to get rid of a flat spot on my tire, didn't really work too well but fun nonetheless.
-
-
Yep, that's exactly what I need.
You can tighten them up. Just loosen up the lock ring and then turn the larger outer part in until it's tight, then tighten down the lock ring.
Thanks Jon. I will try that first.
-
Check internet, like autozone.com or something like that?
Just checked autozone and oreilly and no luck. I guess it's true that they don't make them any more ;(.
-
Can anyone else confirm that autozone carries the right inner tie rod.
-
Where did you order it from?
At one point I could only find inner tie rods for one side (either right or left-can't recall). Anyway, if that is still the case, you can use the same inner tie rod on both sides, but you have to get an outer tie rod to go with it. Only draw back is that the grease zerk is backwards, but you gotta pull a wheel to grease it anyway. I hope both sides aren't NLA!?
-
So i've been trying to find replacement inner tie rods for my 72 240z. It looks like nissan discontinued making them? There is also seem to be an issue with wrong inner tie rods from the regular autoparts (autozone, oreilly, rockyautoparts)? Where did you guys get your replacement inner tie rods?
I've read someone rebuilding their tie rods; re-tightening, re-grease them, install new boots. Anybody else do this? Did it work?
-
You know i was thinking of the same concept except backwards. zccjdm airdam and add it to the msa airdam.
-
Good luck finding a street tire that is bigger than 245 for 16" wheels.
PASMAG 240z needs your votes.
in Non Tech Board
Posted · Edited by Richs72RBz
Good afternoon guys/gal, I just wanted to put this out there to see if you guys have a moment to spare to show support on my build.
Round 1 of the pasmag tuner battlegrounds. Please take a short moment to vote for my z. Let's see if we can win this! Please share One vote per 24hr. You can vote again tomorrow! Really simple, click the link, log onto Facebook, and click the yellow star and your done! Voters has an opportunity to win an assortment of items from pasmag.
http://tunerbattlegrounds.com/competitors-list/1167-richard-madlangbayan