Jump to content
HybridZ

spent

Members
  • Posts

    8
  • Joined

  • Last visited

About spent

  • Birthday 01/17/1989

spent's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Any idea on a time frame on this? And I also assume that it would be too early to inquire about a price range too... ?? I would place my order tommorrow if the price was reasonable
  2. What all did you have to provide them and what did it cost you without the mounts? Also, how much more hood clearence do you need?
  3. So if you were to remove just NATS from ecu, you could remove BCM without any troubles? So this means what? To JUST make the engine run, nothing else, do you need anything more than the main engine harness and the ECU? After BRIEFLY looking over the FSM, the engine BAY harness did not seem necessary?
  4. From what I understand, removing the BCM will put the car in some sort of "Safe Mode". Unless, of course, you have someone reflash the ecu so it does not need the ecu to properly run...
  5. When I emailed them, he presumed I was asking about a 240sx swap (well, I am actually) and he said the stock gauges would not work. If you are serious about selling all of your VQ stuff, let me know. I would seriously consider taking it off your hands. From what is sounds like, you have all the necessary pieces, now all you need is the will power .
  6. Coincidentally, ZFever uses UpRev. UpRev is a tuning software for the VQ35de engine. They (zfever) seem well put togethor and all, but I did read this horror story over on nicoclub about them. About half way down, myS13wantsaVQ35 tells about his dealings with Zfever, posted below... http://forums.nicoclub.com/zerothread?id=207033&page=11
  7. For those interested, I contacted UpRev and they said that they could remove NATS and "other things" per request. They didn't give me a price, but this could make things quite a bit easier for those who are keyless/ignitionless. I assume they could also remove any error codes the CPU is spitting if you were to remove pieces of the BCM, etc.
  8. Man, awsome project you got going... Put any thought into what turbocharger(s) you will be using? Will you be fabricated the hotside yourself?
×
×
  • Create New...