Jump to content
HybridZ

BlackBeaut

Members
  • Posts

    269
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://

Profile Information

  • Gender
    Not Telling
  • Location
    UK

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

BlackBeaut's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. "It's a revolutionary invention" groan! Excellent bit of engineering though, good luck to them! Cheers, Rob
  2. But they don't have an exotic sound - classic V8 wuffle - don't have a flat plane crank, don't rev to high heaven, and cost serious money to get real power out of. Cheers, Rob
  3. One other difference I've noticed between short nose and long nose covers is that the 8 retaining bolts are bigger on the short nose. Can't remember the exact size but let's say if they're M8 on the long nose then they're M10 on the short nose. Upshot is putting a short nose cover on a long nose is a potential for cover movement. Easy fix is some bushes in the cover holes to take up the slack. Cheers, Rob
  4. A slightly extreme example would be the TVR Tuscan which has a straight 6: Cheers, Rob
  5. Buick sold to Rover, TVR purchased units from Rover and did some (very little in reality) performance mods to them. They were fitted to a number of TVR models over the years, from the '80s Wedges through to the Griffith and Chimaera that ended production in the early '00s. Sizes ranged from 3.5l to 5.0l. In the meantime TVR developed their own engines, initially the AJP8 which first appear in the Tuscan Challenge race car and then in the Cerbera in '96. A couple of years later they brought out the Speed6 engine, intially released in the Cerbera, then used in all further new TVR models (Tuscan road car - see rubbish Swordfish film, Tamora, T350 and Sagaris). The AJP8 was only ever in the race cars and the Cerbera, its production life ended with the Cerbera. Both the AJP8 and Speed6 were developments of designs by Al Melling, a top notch British eccentric who bears a slightly worrying resemblance to Doc Brown of Back to the Future fame Cheers, Rob
  6. Sorry mate but you're 100% wrong about that. The TVR AJP8 (Speed 8 was never used as an official designation) has absolutely no connection with the Buick/Rover V8 other than the same number of cylinders. Cheers, Rob
  7. Here's a good 5th Gear video showing a Honda F1 (V10 era) dragging against a bike and a boat (don't ask ) http://youtube.com/watch?v=mn6eHg1VSZI Cheers, Rob
  8. As long as it had had a recent rebuild by one of the few engine shops appearing in the UK now that replace the dodgy parts made of cheese with proper new metal parts I think it would be a fantastic swap. However the 4.5 AJP V8 would still be the daddy of the TVR engines to get in, but we digress On the topic of BMW V8s my daily driver is a '97 E38 735i, cracking little engine, the later ones with VANOS (post 98 I think) are supposed to be even better. If petrol wasn't so stupidly expensive here I'd quite happily go for a 740i with the 4.4 engine. Cheers, Rob
  9. Cool, thanks Gareth. It would certainly make for an interesting swap. I love the idea of fitting an all alloy straight six in to a Zed. I know the commonly available M52 2.8 has a restrictive intake on it and it's just a matter of tweaking the intake of a 2.5 and fitting that with a bigger throttle body and you can release a lot of ponies for very little money. Obviously still a long way short of the S series engines but then you're talking big money just to get them. Cheers, Rob
  10. Nice write up Gareth, I'd definiteley consider a beemer engine, erm, if I get hold of a Zed again! Can you answer a couple of questions on them? First would be what's the sump like on them, front or rear? Just thinking for ease of install a rear sump is preferable. Second would be the fun that is VANOS on the later M52 and M54 engines. Are there any aftermarket ecus that can control VANOS (I'm guessing it is controlled via the ecu!) If not then any install would require the oem ecu setup to run the engine, how possible is it to strip the ecu from the doner and get it running in much simpler surroundings? Cheers, Rob
  11. Nope, literally only a few design cues on the outside and similar ladder frame underneath (but obviously longer on the Cerb), other than that they're chalk and cheese and the Cerb will destroy a Chim/Griff off the line Cheers, Rob
  12. The Cerbera AJP8 never had anything to do with or anything in common with the Rover V8 bar the number of cylinders, it was a ground up design, flat plane crank, 75 (or there about) angle, it's much more Formula 1 than agricultural Land Rover. The Rover V8s are Buick related too. Cheers, Rob
  13. Yeah, it would've been a complete pain, not only did the bore need enlarging but also the mounting holes drilled accurately, so definitely unlikely to happen in the average home workshop, so more time and expense just to replace the discs. Looking back at the pics though, it does look pretty cool. Good job I didn't take a pic of the other side where I stuck the brembo label on upsidedown like a total 'tard Cheers, Rob
  14. I screwed around a while ago with Brembos from a Fiat Coupe 20V Turbo, don't know if you got that in the US. Had to jump through some major hoops to get them to fit as in they ended up on the other side of the hub - used 260Z hubs on my 240Z. Would also be a pita every time I needed to change the rotors as they required machining to fit on the back of the hub. I was planning on swapping to Z31 5 stud hubs and was looking at Honda Legend rotors (305x28mm 5x114.3 studs) as being a possible front fit, and the extra space could've meant I'd've got the calipers back on the correct side of the hub. In the end it all went down the pan, sold the calipers on Ebay for more than I paid anyway, I'd go Arizona Z Wilwoods if I were to do it again. Other pics here: http://www.zclub.net/gallery/showgallery.php?cat=500&ppuser=896 Cheers, Rob
  15. Check out the bump steer FAQ, rca's have no effect on reducing bump steer. 1) dunno 2) No need to change spring height as ride height isn't affected by rca as it sits below the wheel axis line. You could make a 5" thick rca an it would still have no effect on ride height - it would bugger up the geometry admittedly, so don't make one Cheers, Rob
×
×
  • Create New...