littlecrow

Sorry about the very lage photos, my bad.

Anyways, I had a lot of noise and slight vibration coming from the front end of my Z31 and knowing it wasn't the tires I decided to take the whole brake system off up to the spindle and I think I figured out the proble; Found a good bit of gouges were the inner bering goes, could somebody tell me if the spindle is completely shot or still okay to use.

Yeah, I would imagine that the wing would block some of your rear view, but I just thought it kinda fit the body a bit, although it does look better than those sheap aluminum wings

Hey guy's, I was wondering what wing this is and were can I find one for my Z31, I've seen some fox body mustangs with wings Similar to this one; I just thought it looked half way decent on a Z31 and I would like something to get something like it. Thanks.

Yeah, I'll try to oil the assembly up with something, but I also thought about just painting the whole thing but I wasn't sure if that would be wise.

Sorry if this is in the wrong spot but I'm not sure where to put it anymore. I was wondering what is the best way to paint the rear calipers on the Z31, because the last time I painted my rear calipers I sprayed the calipers with brake parts cleaner, tapped off the piston and the emergancy brake lever, and then sprayed a cupple coats of paint on the caliper, it looked good on the car but a few weeks later I took a look under the car to fix a sticky brake and noticed that the whole emergancy brake spring and lever were coated in rust, so what I'm asking is what is the best way to paint the rear calipers and keep them from rusting. Thanks

Well by ECU I'm talking about the computer in the passenger side kick panel, because on a Z31 the computer has 2 diagnostic lights on them (one green and one red) but I dont think it's suppose to be blincking the way I've described it, and the computer has never been set to diagnostic mode so I'm not sure what it is.

Thanks for the information, I'm prepared to do alot of work if needed so it dosent scare me to bad and I have a few spare fenders I can chop up first to see how much needs to be taken off, I just need to save up the $220 to buy it. Appreciate the help.

I was thinking about getting the Bomex bumper for my 86 Z31 but while I was looking at photos of the bumper I noticed that you may have to cut some of the fenders to fit it, I've never done a lot of body work before so I dont know how much work has to be done to fit it right so if anybody has anyy experiance with this bumper I could use the help thanks.

Sorry I forgot to say it's a 86 Z31.

Well I sherch for any thing related to this but could'nt find any thing to help me. I noticed the other night while driving that my ECU has a light that constantly blinks, but only when the throttle is open, when I let of the throttle the light goes out for a few seconds then stays on without blinking until I give it some gas. I'm not sure what is wrong because I have never worked on any ECU's before. so any help would be cool.