72240Z
-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by 72240Z
-
-
If you can wait till next week I will look to see if I have a spare, it's yours for shipping if I can find it.
-
-
You'r welcome.
-
13 1/4 Top.
10 1/4 Bottom.
-
-
If no one else posts them before tomorrow I will get them for you.
-
-
-
-
-
I have the parts you want but the shipping might make the cost to high, can't you find those parts in the UK?
-
Do you need an early cam that uses a spray bar or a later cam that oils through the cam?
I have an early one from a 240 ,the 280 cam from LanceVance should be
The one on top is a late cam. The one on bottom is a early cam.
-
You need that part from a 70 to 73 after that they changed. A good body shop should be able to fix the part you have.
-
PM ed you about the rods you are looking for.
-
-
-
I have one of a 73 240 with a little surface rust. What do you consider cheap?It's in Asheboro NC 27203 so shipping might be high unless you know a cheap method.
-
If I were you I would pound it out with a body hammer. But if you want that piece I have a 73 240 I can cut it off, if you will draw a line around where you want it cut I will make sure the piece I have is good $25 plus shipping from Asheboro NC 27203
-
That's good to know.
Thanks for the reply.
-
73 4speed whole trans
-
would the plug from a 240 work? I may have one I will have to look tomorrow.
-
What do you consider priced right? And could you pick it up in North Carolina?I know it's farther than you want to drive.
-
I have one in an old rusty hatch I'm in Asheboro NC it is 154 miles from Shaw AFB if you are interested in it you can message me
-
zboi I sent you a private message.
WTB - rear strut tower caps
in Parts Wanted
Posted
I found it, PM me with your address and how you want it shipped. I'm in Asheboro NC 27203