Jump to content
HybridZ

Search the Community

Showing results for tags '240z'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical
    • FAQs
    • Model Specific
    • V8 Z Forums
    • 6 Cylinder Z Forums
    • Other Engines
    • Engine Components
    • Body Kits & Paint
    • Windtunnel Test Results and Analysis
    • Brakes, Wheels, Suspension and Chassis
    • Drivetrain
    • Fabrication / Welding
    • Interior
    • Miscellaneous Tech
    • Trouble Shooting / General Engine
  • General
    • Announcements
    • Non Tech Board
    • New Members Forum
    • Members Projects
    • Motorsports / Events
    • Buy / Sell / Trade
    • Group Buys
    • Vendor's Forum
    • Links
    • Site Support

Blogs

  • Blog 7794
  • Blog 7796
  • Blog 7797
  • Blog 7801
  • Blog 7810
  • Blog 7821
  • Blog 7850
  • Blog 7876
  • Blog 7900
  • Blog 7903
  • Blog 7918
  • Blog 7945
  • Blog 7995
  • Blog 8097
  • Blog 8113
  • Blog 8124
  • Blog 8199
  • Blog 8217
  • Blog 8223
  • Blog 8239
  • Blog 8335
  • Blog 8424
  • Blog 8478
  • Blog 8501
  • Blog 8644
  • Blog 8751
  • Blog 8853
  • Blog 9074
  • Blog 9088
  • Blog 9095
  • Blog 9152
  • Blog 10389
  • Blog 10579
  • Blog 10681
  • Blog 10929
  • Blog 10956
  • Blog 11195
  • Blog 11737
  • Blog 11794
  • Blog 11853
  • Blog 12120
  • Blog 12435
  • Blog 12884
  • Blog 13129
  • Blog 13159
  • Blog 13200
  • Blog 13472
  • Blog 13567
  • Blog 13587
  • Blog 14207
  • Blog 14439
  • Blog 14625
  • Blog 14703
  • Blog 14909
  • Blog 14919
  • Blog 14975
  • Head Gasket for 3.1 liter stroker engine
  • Blog 15298
  • Blog 15393
  • Blog 15520
  • Blog 15602
  • Blog 15654
  • Blog 15717
  • Blog 15865
  • Blog 16224
  • Blog 16227
  • Blog 16485
  • Blog 16662
  • Blog 16809
  • Blog 16878
  • Blog 16923
  • Blog 17059
  • Blog 17103
  • Blog 17116
  • Blog 17333
  • Blog 17402
  • Blog 17506
  • Blog 18026
  • Blog 18084
  • Blog 18466
  • Blog 18819
  • Blog 19188
  • Blog 19475
  • Blog 19671
  • Blog 19685
  • Blog 20165
  • Blog 20200
  • Blog 20239
  • Blog 20330
  • Blog 20345
  • Blog 20475
  • Blog 20568
  • Blog 20611
  • Blog 20767
  • Blog 20885
  • Blog 21113
  • Blog 21316
  • Blog 21355
  • Blog 21400
  • Blog 21541
  • Blog 21630
  • Blog 21672
  • Blog 21712
  • Blog 21925
  • Blog 21950
  • Blog 22036
  • Blog 22272
  • Blog 22312
  • Blog 22331
  • Blog 23034
  • Blog 23042
  • Blog 23220
  • Blog 23246
  • Blog 23322
  • Blog 23406
  • Blog 23570
  • Blog 23700
  • Blog 23718
  • Blog 23737
  • Blog 23762
  • Blog 23794
  • Blog 23917
  • Blog 23956
  • Blog 23959
  • Blog 24064
  • Blog 24131
  • Blog 24139
  • Blog 24205
  • Blog 24221
  • Blog 24240
  • Blog 24430
  • Blog 24435
  • Blog 24495
  • Blog 24576
  • Blog 24643
  • Blog 24722
  • Blog 24770
  • Blog 24833
  • Blog 24848
  • Blog 24853
  • Blog 24872
  • Blog 25030
  • Blog 25248
  • Blog 25289
  • Blog 25373
  • Blog 25396
  • Blog 25527
  • Blog 25674
  • Blog 25853
  • Blog 25886
  • Blog 25922
  • Blog 25986
  • Blog 26129
  • Blog 26181
  • Blog 26217
  • Blog 26240
  • Blog 26247
  • Blog 26299
  • Blog 26401
  • Blog 26440
  • Blog 26559
  • Blog 26735
  • Blog 26736
  • Blog 26831
  • Blog 26844
  • Blog 26883
  • Blog 26884
  • Blog 27002
  • Blog 27028
  • Blog 27169
  • Blog 27260
  • Blog 27267
  • Blog 27307
  • Blog 27345
  • Blog 27400
  • Blog 27428
  • Blog 27452
  • Blog 27558
  • Blog 27622
  • Blog 27707
  • Blog 27735
  • Blog 27877
  • Blog 28049
  • Blog 28070
  • Blog 28199
  • Blog 28214
  • Blog 28234
  • Blog 28308
  • Blog 28320
  • Blog 28475
  • Blog 28476
  • Blog 28494
  • Blog 28657
  • Blog 28671
  • Blog 28814
  • Blog 28880
  • Blog 28923
  • Blog 28943
  • Blog 28945
  • Blog 28982
  • Blog 28993
  • Blog 29008
  • Blog 29036
  • Blog 29168
  • Blog 29412
  • Blog 29467
  • Blog 29618
  • Blog 29710
  • Blog 29759
  • Blog 29832
  • Blog 29868
  • Blog 29922
  • Blog 29950
  • Blog 30009
  • Blog 30027
  • Blog 30175
  • Blog 30182
  • Blog 30287
  • Blog 30302
  • Blog 30339
  • Blog 30443
  • Blog 30461
  • Blog 30474
  • Blog 30517
  • Blog 30556
  • Blog 30654
  • Blog 30729
  • Blog 30758
  • Blog 30773
  • Blog 30842
  • Blog 30872
  • Blog 30886
  • Blog 30989
  • Blog 31027
  • Blog 31048
  • Blog 31073
  • Blog 31109
  • Blog 31116
  • Blog 31138
  • Blog 31251
  • Blog 31307
  • Blog 31343
  • Blog 31378
  • Blog 31393
  • Blog 31432
  • Blog 31495
  • Blog 31507
  • Blog 31592
  • Blog 31626
  • Blog 31643
  • Blog 31692
  • Blog 31717
  • Blog 31760
  • Blog 31768
  • Blog 31777
  • Blog 31826
  • Blog 31851
  • Blog 31877
  • Blog 31907
  • Blog 31942
  • Blog 32009
  • Blog 32051
  • Blog 32073
  • Blog 32094
  • Blog 32111
  • Blog 32142
  • Blog 32169
  • Blog 32198
  • Blog 32250
  • Blog 32256
  • Blog 32259
  • Blog 32262
  • Blog 32291
  • Blog 32371
  • Blog 32417
  • Blog 32463
  • Blog 32515
  • Blog 32519
  • Blog 32562
  • Blog 32678
  • Blog 32695
  • Blog 32725
  • Blog 32981
  • Blog 33294
  • Blog 33517
  • Blog 33612
  • Blog 33734
  • Blog 33993
  • Blog 34018
  • Blog 34140
  • Blog 34452
  • Blog 34586
  • Blog 34855
  • Blog 35117
  • Blog 35378
  • Blog 35742
  • Blog 35956
  • Blog 36022
  • Blog 36030
  • Blog 36711
  • Blog 36997
  • Blog 37069
  • Blog 37070
  • Blog 37103
  • Blog 37166
  • Blog 37257
  • Blog 37645
  • Blog 37818
  • Blog 37954
  • Blog 38369
  • Blog 38569
  • Blog 38681
  • Blog 38923
  • Blog 38945
  • Blog 39122
  • Blog 39441
  • Blog 39494
  • Blog 39529
  • Blog 39575
  • PSL_240z's Blog
  • Phlebmaster's Blog
  • dhp123166's Blog
  • miguel240zcruz's Blog
  • dsalni's Blog
  • dsalni's Blog
  • beon's Blog

Calendars

  • Community Calendar

Categories

  • Configuration File Sharing
  • Drawing Files, Templates
  • Manuals, Diagrams, Guides
  • Software, Calculators
  • Other misc files

Product Groups

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. Hello Everyone. I am looking to purchase an S30 with a manual that is in decent shape. Don't care about model (Coupe or 2+2) or year. Just an S30. Not too much rust or no rust and something that runs. It can be ugly just want to not have to do tons of rust repair. I'm looking for a light project not a complete ground up overhaul. I'm located in Coal City, IL. My contact information is bkhansen93@gmail.com or 8154053050. Will be willing to speak to anyone who has something to sell. Just reach out to me.
  2. Hey Guys, I have been trying to figure out what I wanted to do for color uniformity on my datsun. I really wanted to get the car sand blasted and do a complete overhaul, but after swapping a l28et in the car, building and installing the megasquirt, and all the other tid bits... I was way over budget to say the least. To be cost effective I decided to do a vinyl wrap. 3m vinyl to do the whole car was only 500 bucks! The car itself was in no shape for vinyl. It had chips, dings, rust, you name it. I had to do all the body work to straighten it out. Here is some before pictures. The paint had to be sanded or removed to metal and bondo was applied. First time ever really doing body work and it looked OKAY. I did have a professional come and do the final things to the driver's side fender and door. Lots of chipping paint that needed to be sanded. After things were sanded and looked pretty good, spray can primer was sprayed on the trouble spots, then sanded, then black rustoleum, then sanded. Finally I wet sanded the car with 1000 grit and made sure all surfaces were smooth. Then the fun began. Vinyl took around 20 hours to finish in a weekend. This did not include the headlight buckets, turn signals, or cowling which I am still trying to figure out. The car being unibody caused issue. The rear bumper section is 1 piece which is then overlapped 1 inch by the quarter panel which is then overlapped by the roof. Knifeless tape was key to get smooth lines. The hood is harder then it looks because of the round center bubble. Really have to stretch and pull to get in on right. Also getting the vinyl to stick properly on the back required cleaning all edges and even applying loctite super glue.... I know not the right way, could use primer 94, but actually works! Just don't get that near any exterior surfaces or you will leave marks on the laid vinyl. Fenders are one of the easiest. Tucking around the wheel arch was a little tough. Make sure to clean these back areas so that no dirt is in between were you want the vinyl to stick on the inside. This is were I started to notice that my rusto paint would start to peel if we kept taking off and re-applying the vinyl. There are spots were you can see this for sure, but oh well.... it cost 500 dollars. Also you would get specs of shit for the same reason, small pieces of paint peeling up. Moral of the story. Only works on really good paint or paint that is strong against the body. Should have spent more time in that regard. Rear bumper area was pretty easy just a flat piece. The quarter panels were the most difficult. Trying to get around the rain gutter was a challenge. We accidentally cut the vinyl and had to pivot to a new plan regarding the roof. Paint was peeling up if we removed it so we went with what we got. If we were to peel it off... I would have to sand the whole quarter panel over again. Made it work, just needed to add an intermittent piece between the quarter panel and roof. Getting around the back taillight area was a little hard as you really need to stretch it. I assumed the inner edge would mostly be hidden by the taillight panel, but more is exposed then I thought. Might try to adjust this better. Roof and hatch were also pretty difficult. If you have old shitty gaskets around the glass. CHANGE THEM. Tucking underneath that shit would have been way harder than it already was. I got new rubber were needed and it was way worth it. If you mess up on a part like that... there goes 70 bucks in vinyl to redo it. Tucking worked best with knifeless tape in my opinion. Don't forget the sides of the windshield... I used a small inlay for that. Also the bottom area below the door is an inlay. Here is the vinyl result.... get it... vinyl result Might keep the windshield wiper area black... its scary when you see all the spots were it needs to be cut! Here is a picture of how we did the inlays from quarter panel to roof. It turned out pretty damn good if I say so myself. I have learned a lot about this process as I went because there is not too much info about unibody cars. I would say that this is a pretty difficult job and very tedious. Details are important, missing a cut or making a mistake can make it look bad. We had mistakes, bumps, paint chips you name it, but the point of this was to get the car looking good for a couple years for cheap until I am ready to get the car painted. What I would suggest if you want to do this... - Make everything really smooth. - If painting, take your time and get it to stick well. Paint peeling and sticking to the vinyl was the biggest issue I experienced. - Have a friend. My dad worked the whole time with me.... I can't thank him enough. I did a trial hood before all this on my own and it took 2 times as long and looked way worse. - Plan out all the cuts before you apply. Thought I would share my experience. If you have any questions about it let me know. I hope to reassemble the car in the next 2 weeks.
  3. I see a few posts in here but I am looking for more specifics if anyone has any input or wants to try and convince me toward a direction go ahead but. I want to do a clean build (no junkyard shit) that I can take on road trips and whatnot, maybe on weekends and all that. I have heard horror stories of horrid MPG and being in the shitty state of CA id like to keep in the friendlier numbers of MPG. I am also not shy of HP so I was looking into RB26 swaps, Chevy V8, etc. Since I am a bit new am I going to run into shit with some setups, huge costs? Any info would be great or links to good posts.
  4. After much thought on whether or not I wanted to create a full thread of my first 240z build I have decided that it would be worth it in the long run and nice to look back to. I will have about a year to catch up with then I will continue to update as the build goes on. Backstory: I bought this Miata when I was a senior in high school. I wanted to see if I was truly passionate about cars and if I enjoyed working on them/driving them. This car was a blessing and a curse, I quickly found out that I loved cars and all of my money would be taken by them. Fast forward and I had supercharged it with all the basic Miata mods. The car was extremely fun, but it was not a car that I saw myself keeping for the long run and I had this long list of parts/mods I wanted to do to it. I had always wanted a few cars but they were just out of my price range; 240z, s2000 and a few old muscle cars. I thought about it and decided that if I was going to pour tons of money and time into a car I wanted it to be a car I wanted to keep and loved the looks of, not just enjoyed the drive. Once I had made this decision I was a sophomore in college and began the long search for a Z. I spent about 9 months of searching everyday for a s30, primarily looking at 240zs.
  5. Hello! I have a 1973 Datsun 240z that I plan on putting an 800hp 2JZ in but obviously need to work on some chassis strengthening before I rip the thing apart with that much power. Here is a short list of items I found posted by the late John Coffey himself for a streetable car: 1. Seam Weld (every sheet metal seam overlap.) 2. Bad Dog Subframe Connectors 3. Weld-In Roll Bar. 4. Welded In Rear STB. 5. Triangulated Front STB. 6. Radiator Core Support Reinforcement. 7. Transverse Link Bracing Reinforcement. 8. RT Diff Mount. 9. Tubular Seat Mounts. 10. Box Upper Frame Horns to Firewall/Cowl. 11. Reinforce Pedal Box/Brake MC Mount. 12. Reinforce Front ARB Mount. 13. Reinforce Front Strut Tower to Frame Rail Junction. I plan on doing some competitive drag racing, roll racing, track days, and driving the car around just about everywhere! I have a very clean paint job on the car and the body is nearly perfect, so repainting the car/pulling out glass isn't really something I'd like to do. However, I think pulling everything else off the car and putting it on a rotisserie would make the seam welding much easier as well as the frame rails and such and I can live with that. I would LOVE to hear from you guys that have done this and if you were able to preserve the paint and glass on the car. This is a pretty big undertaking so I'd like to prepare myself as much as possible before jumping into this huge project.
  6. Hello forums, first post here. I’ve been sifting through these forums for awhile and cannot seem to find the answer to my question. A friend and I are restoring/making a track car of a ‘73 240z I picked up recently. We’re currently stripping it down to a bare shell to mount on a rotisserie for sand blasting, but ran into an area of bad rot on the air duct under the front fender. Is this area highly structural? Im wondering if anyone has tackled replacing metal in this spot or cutting it all out and replacing it with tubes? Any suggestions? Thank you! Here’s the goals with this car by the way: -streetable track car, will be driven only now and then, not a daily or a dedicated track only car -plans are to drop an RB in it, not sure which one yet, and have it built to around 350-450whp -would like to keep the stock locations of the suspension components as i do not want to mess with the geometry -will have a full roll cage p.s. moderators I did not mean to post this multiple times, it was giving me an error and I didn’t think it posted. Was also told my previous posts weren’t working because of the apostrophe in the title. Sorry!
  7. I thought I share my Datsun project here. I bought it about year ago from US. I looked car that was not too rusted, was running and cost under 5K. Finally found this -71 240Z from Hollywood. It was little over my budget, but seller was kind enough to drive it so shipping company, so I saved few hundred in there. And there was also lots of new parts included. Car had L28, 5 speed, R200 and Z31 ECU. After waiting two (long) months car finally arrived to Finland and it turned out to be in much better condition that I could never expect. There was almost no rust and car really was in driving condition. I drove few days with it and then teared it apart. And I also sanded it to bare metal. Only welding that I did was fill those side light holes because they are not needed in my country. After that it was time to paint. Painting was done in my own garage where I did small "paint booth". After painting it needed lots and lots of wet sanding and polishing... Previous owner had fitter Eibach springs and Tocico shocks but I wanted it to be lower so coilovers were needed. I bought BC Racing coilovers that were meant for S13 and fitted them to S30. I cutted original shock tubes and welded threaded collars in place of them. S13 camper adjust strut tops were too big for S30 strut towers, so I made smaller strut tops. There is not much camper adjust, but at least some. Previous owner had fit disk brakes to rear and 13/16" MC. I decided to upgrade front brakes with 300mm vented rotors and Outlaw calipers. I also did 5-lug swap using Z31 parts in front and rear hub was redrilled. I have always liked old BBS wheels and bought BBS RM. Wheel were originally 7.5" x 15" and rear wheels were widened 1.25". Interior was in quite bad shape. Seat cover was broked and dash was cracked. I repaired dash with fiber glass and painted it black. Seat was repaired with new covers. New gauges came from Speedhut. I have now driven about 5000km with my Datsun in this summer. Have been in few track days and few car meets. And it has worked perfectly. As for new engine I wanted some modern 6 cyl engine, and though RB25. However those are quite expensive and rare in our country, so I used something totally different...BMW M50B25 with 5 speed ZF310 gearbox. I used 2.8 crankshaft and pistons so engine is now 2.8 instead original 2.5. Also block height is shaved 2mm to get squish height to about 1mm. That shaving also get me 12:1 compression so I am going to use E85. As engine management I am using Megasquirt MS3. And I also have M3 throttle bodies and headers and some hotter cams. Engine is now totally rebuild with new piston rings, bearings, cam chain, etc. During this winter I need to get this engine fitted to Datsun engine compartment and get everything working.
  8. Gather around folks I'm building my dream car. Some may know me here, some may not. I've been building nissans for 15 years now. My last personal build started in 2009 on this forum but I stopped documenting after 2011. I just sold my entire setup to my best friend, which I also sold my 2nd 240z too. So I'm starting to document a new chapter in my build. I tore down my black car and we are completely rebuilding my friends orange one better than ever. The original setup was amazing, never let me down. R34 NEO motor, GT35R, Tein coilovers with edfc, clsd, axles, wilwoods.... etc. This brings us to my new build and it's current state on my rotisserie waiting to get massacred. I'll post some photos and get this ball rolling Donor car was an ever so gracious R33 GTR Vpec, 90% of parts came from the same car. I will be grafting front and rear sub frames into my Z chassis, including the AWD system, Brembos, suspensions (tein), Axles, Diff, etc from the GTR... I've even gone ahead and gotten the GTR pedel set and Master so she should feel as GTR as possible from inside. Steering column, steering rack all modern and hydraulic (and left hand drive ) I've collected 90% of the bizarre hardware associated with the awd system too. Also will be doing GTR gauges, chassis strengthening, new wiring, wheels, so on and so forth.... My old car was quite the track beast, I intend to make this one deadlier than ever. More so I just love building so I'm doing it Grab some popcorn, this ones going to take a minute!
  9. I purchased this dash over 5 years ago but never used it. I believe it was an alternative dash for use with Vela Rosa or Thunder Ranch GTO kits. Anyone have an idea of worth, or have a need? I'll probably ebay it. PM me with any thoughts
  10. so for some reason when i flip the turn signal switch the signal turns on but it just stays on it doesn't flash how it is suppose to and also my hazard switch doesn't work don't know if the two problems relate. would anyone know the fix. -thanks
  11. Looking for 1973 Datsun 240z body hood emblems and scripts
  12. Looking for black rubber trip pieces for front and rear bumpers and bumper guards
  13. Looking for black rubber trip pieces for front and rear bumpers and bumper guards
  14. This came in a 240z I got a few years ago, I parted the car out as a friend of a friend wanted something for an lsx swap and my uncle has been trying to sell me his 240z for ages. The z I bought from my uncle has a rebuilt numbers matching original motor so I’m not changing it. This L28 came from a 280z and is supposedly built. Unsure what it has, could be just a cam, I wasn’t the one who put it together. N42 block, N47 head. Turns by hand. Remanufactured starter. Intake and exhaust manifolds were on until I just removed them, it wasn’t sitting exposed. L28’s originally came in 280z’s but they can be used in 240z’s with carbs, an electric fuel pump, and ignition control (I have a Crane kit and a GM unit people often use available). $675 6-1 header available separately $195. Round top SU carb complete setup available extra with motor. Located in Buffalo, NY, I’d drive across the border in exchange for a bottle of vodka from the duty free heh Text or call 716-7two5-5366
  15. Hi guys. I hadn't come across your site before (my loss), the fine folks at Z Car Club of Washington suggested I post my car here. 1973 Datsun 240z in beautiful condition, ready to drive and cherish. You experts will have seen mods like this before. It's been fitted just a few months back with a 350ci Chevy crate V8 motor. Tidy install with T5 5-speed manual transmission, R200 differential, new clutch, flywheel, driveshaft, and aluminum radiator. Body recently repainted in its original silver, stock slim bumpers without overriders remain in place, and chrome bullet-style side mirrors added. Further alterations include 15x8" Rota wheels, lowering springs and new struts, 3-spoke Raid 1 steering wheel with Datsun horn button, fixed bucket seats with suede inserts. Goodyear Eagle tires dated 2015, plenty of tread. The passenger side taillight is cracked, though I have a replacement unit to swap. Also have chin spoiler for fitting if desired (I prefer without). Factory stereo and clock don't work (I just use a bluetooth speaker). Always garaged, no rust or other trouble to the best of my knowledge. I have the engine paperwork and clean title. Basically this is a gorgeous car that you could drive every day or keep for special occasions. I actually have not owned it very long, the only reason I'm selling is that my new house has a steep curb/driveway (both up and down) and I can't get this car in/out without dragging the exhaust, even with my curb bridge in place. I'm very sad about that, but it looks like it's time for a new owner to enjoy the car. I am happy to provide more photos/video or show the car to anyone interested here in Seattle. $19k OBO
  16. I'm trying to get my new Series 1 240Z project car started, and it looks like the original fuel pump isn't working. I bought a replacement, but the bottom bolt snapped in half while I was removing the original. Now I have half of that bolt stuck in my block with no good way to pull it out. Does anyone out there have any good ideas? I've heard of people welding on nuts, but I've never welded in my life so I'm a little worried about trying it. Also, I'd like to get a replacement bolt for when I eventually pull that sucker out. Does anyone know what size bolt this is?
  17. Does anyone have a diagram or a list of all the grommets and seals that at 240Z needs or where I could obtain that information ? I am needing every bit of rubber on my car but I want to make sure that I get every one that I need
  18. Hey y'all, I need some clarification. From what I've read in various forums and conversations & a few google searches. Datsun utilized 2 or 3 versions of the 5 speed for the 280z. Again, from what I've read. It seems as though the later 80-83 version is the more desirable due to it being a close ratio gearbox compared to the earlier versions. And from what I can tell, it doesn't seem as though there is any identification numbers stamped on the transmission. I did read that if the 5 speed has one hanger at the tail end then it's the more desirable version compared to the earlier version which would have two hangers/forks? There was a 4204C label stamped on it, not that this probably helps. If anyone can tell me which version of the 5 Speed I bought, I'd appreciate it. Did anything that I mentioned above seem to be completely wrong? Thank you in advance!
  19. Hello I have never welded before and was hoping that you all can tell me if I should buy a "mig welder" and attempt to spot weld my entire car myself? If so any ideas of the most inexpensive machine and possible advice on how to learn to do myself?
  20. So I'm beginning to fix some things on my series1 240Z #5837. One of the most obvious issues is the horn button. The black plastic behind it was 40 years old and cracked and crumbling to the point that no amount of glue or Zipties was going to hold that button on. So talking with a buddy of mine, he suggested maybe I could print up a fix. He gave me another busted up button to tear apart, so I did and created a new insert to replace the busted up 40 year old crappy plastic. I printed this out of ABS and worked it into my old button after removing the old plastic. I made it about 3mm wider OD to ensure a snug fit. It can be glued in place with rubber cement, but I'm not certain that's necessary, as it's fairly tight. It fits well on 240Z's and I can print it in about any color (not that you'd see it). Here it's printed in white so you can see the detail. It snaps on just the same as the original did, but ABS is a little more forgiving. If there's a market, I was thinking of selling the printed inserts for $20 ea. It's very interesting to think of recreating various classic S30 parts that are difficult to come by, especially NOS. Let me know if there's any other parts you might like to see recreated. Phar
  21. Hi, I'm looking for a set of rear turrets from a 240z. Perhaps you have a rusted out or crash damaged car? If so I'm looking for the turrets to be cut out out. I've attached an image highlighting the panels I'm after. Thanks.
  22. I have purchased the vintage air 2 for my 70 to 240 Z I was hoping someone knows the specs/measurements for the brackets to install the unit under the dashboard I cannot weld so I’m trying to just put together steel brackets and put them together to fit but I could use some help with how far up and down place it in side to side so I’m not spending an arm and a leg on the brackets. Or if anyone has got extra ones welded I’m willing to purchase them ?😀
  23. Hi peeps I have an 72 240z and I have purchased an Vintage air Gen 2 air conditioning system, but I do no have the bracket that will hold the condenser in place that will also give it tension! So I am hoping someone can give me a path on where I can purchase a reasonably priced bracket for this system?
  24. Hello Everyone, I bought a 1971 Datsun 240z, about 2 years ago as my first project car. The more I started to dig into the car, the more I wanted to repair and improve it. Initially I was just planning on getting it running and using it while slowly upgrading and repairing it. I ended up tearing it down to the bare chassis, mounting it on a rotisserie and media blasting it. After I media blasted it, I decided to replace the floors and upgrade the frame rails with baddog frame rails. I sat down and thought about what I wanted the car to be and I came up with a ton of ideas, but ended up narrowing it down into one vision. The vision is this(nicknamed ProjectWhiteNoiseZ): My vision is inspired by modern Nissan Nismo styling, but it will be powered by a 2JZ-GTE with a cd009 transmission. I have gone through every part and media blasted and powder coated it or upgraded it with something better. Doing all of this, inspired my brother to buy a crashed 2008 Mustang GT and the current plan is to complete our cars by August/September '18. I live in Colorado and he lives in Pennsylvania, so I'll be road tripping the 240z 1700miles each way when complete to meet him at a track in Pennsylvania and race. If you're interested to see the work and follow our journey to complete our cars over the next few months, we have a YouTube channel, Facebook, and Instagram where we're documenting our builds. Any comments on suggestions for YouTube video improvements are appreciated. We will answer any questions you have. YouTube: https://www.youtube.com/channel/UCJt7v6VEHBqNPweO_cZ1guw PBB Instagram: https://www.instagram.com/projectbuildbrothers/ PWNZ Instagram: https://www.instagram.com/projectwhitenoisez/ Facebook: https://www.facebook.com/ProjectBuildBrothers/
  25. Need a 1973 headlight combo switch, im in nj so can drive or factor that for shipping Mine crapped out, i tried cleaning that little box with the tabs that controls the headlights and tail lights but the issues was with those little caps that cover the springs in the mechanism they were totally messed up and that whole box is kind of dead.... looking for either entire assembly or just the little headlight box with the rocker switches and those 2 springs with the little caps. Attached a pic of the box and the little caps over the springs, let me know what you have! car isnt really entirely drivable with out this! thank you!
×
×
  • Create New...