Search the Community
Showing results for tags 'datsun'.
-
From the album: New Parts
-
From the album: New Parts
-
Hey all, I’m a Datsun newbie! Always wanted a 240z/510 project and finally made it happen over the weekend. I picked up the 73 Datsun 250 miles away from home with the “guaranteed to make the drive” from the owner – which it did not but we’ll get to that later. 1973 Datsun with a SBF 306 engine with GT40p heads, single plane intake, 750 Holley HP carb, speedway headers, 3” exhaust, manual valve-body c-4 transmission with SFI bell housing and 9” stall converter, TCI shifter, R200 posi rear end, Meziere water pump. I realize the 750 carb is probably too big, I think its what the PO had around and tuned it work. Motor seems to run strong, starts up pretty easily from a cold start and sounds like a beast. I however am a complete V8 newbie. Here are some pics of the car/engine. I ended up having to tow the car after 40 miles of driving as smoke started to fill the cab, when I pulled over it seemed like transmission fluid was dripping onto the exhaust. Upon examination we found the speedometer (speedometer and tach not hooked up) cable opening was closed with a rubber bushing and a wingnut. I tightened up the wingnut and have taken it for some short trips and it has not leaked yet. So that seems to have fixed the problem. I am not a huge auto guy and would prefer a 5-speed. I don’t even know where to start with wrapping my head around what that would entail. I have 2 large questions at the moment. The first is the transmission which has no transmission cooler – and it not hooked up to the radiator for cooling – is this a problem? The second is the flywheel – it looks like casing was trimmed back for some reason and the flywheel is exposed – is this a problem? Thanks for any help.
-
Hi guys well i just sold my 06 350z and ive decided that im just going to start an rb25 swap on my old 73 240z soon. But before that i would like to see whats out here to see if you guys may have laying around. Im looking for performance parts, maybe someone has the mounts laying around they never got to use.? If not im going with the Mckinney mounts. Anything rb25 related is usefull. Let me know if anyone has anything. 240z parts i can also consider. Thanks.
-
Hello everyone! Im new to the Hybrid Z forums so I thought I would start a build thread for my build on my 1975 280z. Current car: 1975 Datsun 280z Mods: Subaru Power Steering conversion, Full Eibach suspension, aftermarket swaybar + full polyurethane bushing conversion, Toyota front disc conversion, aftermarket A/C installed, 240z driveline, (im probably missing some things so I'll update it as I go.) I have roughly 20 years of receipts of all the work done to the car. I just recently acquired the car so everything listed above was done by the previous owner. Now here is my plans for the rest of the car: [Key --> Green = Acquired Crossed Out = No longer using ] Turbo Spec Motor 7.31:1 Compression (N42 block/P90 Head) Either T3 Precision Turbo or T3 Turbonetics Arp Head Studs External Wastegate + Blowoff Valve + AFR + Boost Gauge Oil Cooler Turbo dizzy 82/83 280zx + shaft Megasquirt EFI kit from Softopz 550cc RX7 Injectors / 440 cc Supra Injectors (For Sale, Message me if interested I will ship at no extra cost) Turbo Oil pump (thoughts?) 240sx throttle body + Sensor Intercooler + Piping Oil Pressure T for oil lines to turbo (in & dump) 2mm head gasket to lower compression to 7.8/1 wastegate Downpipe (need a dump tube as well for the wastegate) Turbo Manifold(x2 anybody want to purchase my extra?) + wastegate adapter 2.5" exhuast / black widow widowmaker Upgraded Ignition System (not sure which to go with yet, suggestions??) NGK Plugs Pallnet Fuel Rail Kit + Throttle Body Spacer Electric fuel pump upgrade + New Pressure Regulator ------------------------------------------------- UPDATES: Update 11/3/2017 - With some great info/advice from the comments, I am highly considering going with a megasquirt plug in play kit made by softopz (just waiting on his reply at the moment). I've also decided I definitely DO want a bigger cam, so any suggestions on that front are helpful as well. Also I have added that if I go the megasquirt route I am ordering a pallnet fuel rail to compliment it. Update 11/4/2017 - Alright after meticulous research, hours of comparing prices and talking back and forth to people who have done the cam/turbo builds and the potential power gain (and I do mean COUNTLESS hours of this haha), I have decided to completely ditch the whole cam and head upgrade idea and go the turbo build route. For almost the same price (actually a bit cheaper) I can get alot more smiles per gallon with the turbo build. There just isn't enough power to be had on the N/A build for the amount being spent. So as of right now this is the game plan. I will continue to add to this as I see fit, everything will be updated on this original thread post. Part 2 11/4/2017 Just went through the receipts on the car (dating back to the late 90's) and boy was I in for surprise! All of the tedious work to maintain the stock L28 has been completely gone through by the PO! For example the timing chain kit from Z Motorsport has been installed, Tune up kits routinely done, fuel pump and filters / lines replaced, harmonic balancer replaced, and the list goes on. I couldnt be more happy with this purchase!! Did I mention the PO gave me a close ratio 5-speed for the car?! This car amazes me and I am very thankful that it has had such meticulous care over the years. Update 11/7/17 Added some parts to the list. Also purchased a turbo manifold on facebook for 150 bucks! ***Update 11/10/17**** I have purchased a complete L28 turbo motor setup at a very very good price! Here are the engine specs: L28 N42 Block with dished pistons, P90 Head, N47 intake, turbo manifold, Pallnet fuel rail + Fuel pressure gauge, 440cc supra injectors, rebuilt chinese housing turbo with turbonetics internals, turbo dizzy, and assembled with ARP studs. Came with some other misc parts as well. Update 11/13/17 Link to spreadsheet for parts list: https://docs.google.com/spreadsheets/d/1iOiWBJyjQH3KEkLnBor0snwgOvXaUo4I0qIo1ZDYFZo/edit?usp=sharing Update 12/7/17 Tore down the entire motor and I am going to rebuild the bottom end and the head and all freeze plugs timing chain etc... Ordered all the parts just need to hot tank the block to start assembly again.
-
Hello everyone, I picked up a 1971 240z in Oregon for $650. I'm sure I should of looked closer but I was surprised to find that it already has headers, a 5 speed swap, and a K&N air filter. I had my eye on it for about half a year and was lucky enough to finally purchase it. I was told that it was running when it was parked and it was last registered in 08. I brought it home thanks to some help from friends and family and now sits comfortably in my garage. I started out by changing fluids, bleeding the brake lines (the brakes were nonexistent), drained the gas tank and put some fresh gas in, and cleaned the spark plugs. After picking up a new battery and getting the starter and alternator tested I was able to fire her up. There was quite a bit of backfiring through the carbs and exhaust but each time I started her up it got a lil better and after changing the plugs I rarely get any backfire. I've got a huge list of things to buy/fix and am looking forward to all the fun and bloody knuckles that await me. I'm getting it running good for the time being and hope to dig in this fall/winter to fix some of the rust and interior.
-
From the album: 71 240z
Swapped out the old muffler for a Magnaflow muffler. I'm not sure how much I like it but it'll do for now. -
Looking for l28 oil pan. I prefer if someone would contact me from SoCal that way I wont have to pay for shipping.
-
I'm in need of Su round top floats but I can't find anything on the internet that is not priced ridiculously. Tried datsunparts.com but they took a week to process my order then changed the price from $32 to $60 last minute. Im located in Canada any help would be greatly appreciated! I really want to set up the round tops on my 260z and get it running. Thanks
-
From the album: 71 240z
I'm not sure how I missed this but my Z came with headers! -
From the album: 71 240z
-
From the album: 71 240z
I discovered that my Z came with a K&N air filter. -
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
Pulling out old carpet and sound deadening. -
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
-
From the album: 71 240z
My 1971 240z. -
From the album: 71 240z
My 240z in her new home. It's a little cramped but I'll be taking care of that soon.
