Jump to content
HybridZ

Search the Community

Showing results for tags 's30'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical
    • FAQs
    • Model Specific
    • V8 Z Forums
    • 6 Cylinder Z Forums
    • Other Engines
    • Engine Components
    • Body Kits & Paint
    • Windtunnel Test Results and Analysis
    • Brakes, Wheels, Suspension and Chassis
    • Drivetrain
    • Fabrication / Welding
    • Interior
    • Miscellaneous Tech
    • Trouble Shooting / General Engine
  • General
    • Announcements
    • Non Tech Board
    • New Members Forum
    • Members Projects
    • Motorsports / Events
    • Buy / Sell / Trade
    • Group Buys
    • Vendor's Forum
    • Links
    • Site Support

Blogs

  • Blog 7794
  • Blog 7796
  • Blog 7797
  • Blog 7801
  • Blog 7810
  • Blog 7821
  • Blog 7850
  • Blog 7876
  • Blog 7900
  • Blog 7903
  • Blog 7918
  • Blog 7945
  • Blog 7995
  • Blog 8097
  • Blog 8113
  • Blog 8124
  • Blog 8199
  • Blog 8217
  • Blog 8223
  • Blog 8239
  • Blog 8335
  • Blog 8424
  • Blog 8478
  • Blog 8501
  • Blog 8644
  • Blog 8751
  • Blog 8853
  • Blog 9074
  • Blog 9088
  • Blog 9095
  • Blog 9152
  • Blog 10389
  • Blog 10579
  • Blog 10681
  • Blog 10929
  • Blog 10956
  • Blog 11195
  • Blog 11737
  • Blog 11794
  • Blog 11853
  • Blog 12120
  • Blog 12435
  • Blog 12884
  • Blog 13129
  • Blog 13159
  • Blog 13200
  • Blog 13472
  • Blog 13567
  • Blog 13587
  • Blog 14207
  • Blog 14439
  • Blog 14625
  • Blog 14703
  • Blog 14909
  • Blog 14919
  • Blog 14975
  • Head Gasket for 3.1 liter stroker engine
  • Blog 15298
  • Blog 15393
  • Blog 15520
  • Blog 15602
  • Blog 15654
  • Blog 15717
  • Blog 15865
  • Blog 16224
  • Blog 16227
  • Blog 16485
  • Blog 16662
  • Blog 16809
  • Blog 16878
  • Blog 16923
  • Blog 17059
  • Blog 17103
  • Blog 17116
  • Blog 17333
  • Blog 17402
  • Blog 17506
  • Blog 18026
  • Blog 18084
  • Blog 18466
  • Blog 18819
  • Blog 19188
  • Blog 19475
  • Blog 19671
  • Blog 19685
  • Blog 20165
  • Blog 20200
  • Blog 20239
  • Blog 20330
  • Blog 20345
  • Blog 20475
  • Blog 20568
  • Blog 20611
  • Blog 20767
  • Blog 20885
  • Blog 21113
  • Blog 21316
  • Blog 21355
  • Blog 21400
  • Blog 21541
  • Blog 21630
  • Blog 21672
  • Blog 21712
  • Blog 21925
  • Blog 21950
  • Blog 22036
  • Blog 22272
  • Blog 22312
  • Blog 22331
  • Blog 23034
  • Blog 23042
  • Blog 23220
  • Blog 23246
  • Blog 23322
  • Blog 23406
  • Blog 23570
  • Blog 23700
  • Blog 23718
  • Blog 23737
  • Blog 23762
  • Blog 23794
  • Blog 23917
  • Blog 23956
  • Blog 23959
  • Blog 24064
  • Blog 24131
  • Blog 24139
  • Blog 24205
  • Blog 24221
  • Blog 24240
  • Blog 24430
  • Blog 24435
  • Blog 24495
  • Blog 24576
  • Blog 24643
  • Blog 24722
  • Blog 24770
  • Blog 24833
  • Blog 24848
  • Blog 24853
  • Blog 24872
  • Blog 25030
  • Blog 25248
  • Blog 25289
  • Blog 25373
  • Blog 25396
  • Blog 25527
  • Blog 25674
  • Blog 25853
  • Blog 25886
  • Blog 25922
  • Blog 25986
  • Blog 26129
  • Blog 26181
  • Blog 26217
  • Blog 26240
  • Blog 26247
  • Blog 26299
  • Blog 26401
  • Blog 26440
  • Blog 26559
  • Blog 26735
  • Blog 26736
  • Blog 26831
  • Blog 26844
  • Blog 26883
  • Blog 26884
  • Blog 27002
  • Blog 27028
  • Blog 27169
  • Blog 27260
  • Blog 27267
  • Blog 27307
  • Blog 27345
  • Blog 27400
  • Blog 27428
  • Blog 27452
  • Blog 27558
  • Blog 27622
  • Blog 27707
  • Blog 27735
  • Blog 27877
  • Blog 28049
  • Blog 28070
  • Blog 28199
  • Blog 28214
  • Blog 28234
  • Blog 28308
  • Blog 28320
  • Blog 28475
  • Blog 28476
  • Blog 28494
  • Blog 28657
  • Blog 28671
  • Blog 28814
  • Blog 28880
  • Blog 28923
  • Blog 28943
  • Blog 28945
  • Blog 28982
  • Blog 28993
  • Blog 29008
  • Blog 29036
  • Blog 29168
  • Blog 29412
  • Blog 29467
  • Blog 29618
  • Blog 29710
  • Blog 29759
  • Blog 29832
  • Blog 29868
  • Blog 29922
  • Blog 29950
  • Blog 30009
  • Blog 30027
  • Blog 30175
  • Blog 30182
  • Blog 30287
  • Blog 30302
  • Blog 30339
  • Blog 30443
  • Blog 30461
  • Blog 30474
  • Blog 30517
  • Blog 30556
  • Blog 30654
  • Blog 30729
  • Blog 30758
  • Blog 30773
  • Blog 30842
  • Blog 30872
  • Blog 30886
  • Blog 30989
  • Blog 31027
  • Blog 31048
  • Blog 31073
  • Blog 31109
  • Blog 31116
  • Blog 31138
  • Blog 31251
  • Blog 31307
  • Blog 31343
  • Blog 31378
  • Blog 31393
  • Blog 31432
  • Blog 31495
  • Blog 31507
  • Blog 31592
  • Blog 31626
  • Blog 31643
  • Blog 31692
  • Blog 31717
  • Blog 31760
  • Blog 31768
  • Blog 31777
  • Blog 31826
  • Blog 31851
  • Blog 31877
  • Blog 31907
  • Blog 31942
  • Blog 32009
  • Blog 32051
  • Blog 32073
  • Blog 32094
  • Blog 32111
  • Blog 32142
  • Blog 32169
  • Blog 32198
  • Blog 32250
  • Blog 32256
  • Blog 32259
  • Blog 32262
  • Blog 32291
  • Blog 32371
  • Blog 32417
  • Blog 32463
  • Blog 32515
  • Blog 32519
  • Blog 32562
  • Blog 32678
  • Blog 32695
  • Blog 32725
  • Blog 32981
  • Blog 33294
  • Blog 33517
  • Blog 33612
  • Blog 33734
  • Blog 33993
  • Blog 34018
  • Blog 34140
  • Blog 34452
  • Blog 34586
  • Blog 34855
  • Blog 35117
  • Blog 35378
  • Blog 35742
  • Blog 35956
  • Blog 36022
  • Blog 36030
  • Blog 36711
  • Blog 36997
  • Blog 37069
  • Blog 37070
  • Blog 37103
  • Blog 37166
  • Blog 37257
  • Blog 37645
  • Blog 37818
  • Blog 37954
  • Blog 38369
  • Blog 38569
  • Blog 38681
  • Blog 38923
  • Blog 38945
  • Blog 39122
  • Blog 39441
  • Blog 39494
  • Blog 39529
  • Blog 39575
  • PSL_240z's Blog
  • Phlebmaster's Blog
  • dhp123166's Blog
  • miguel240zcruz's Blog
  • dsalni's Blog
  • dsalni's Blog
  • beon's Blog

Categories

  • Configuration File Sharing
  • Drawing Files, Templates
  • Manuals, Diagrams, Guides
  • Software, Calculators
  • Other misc files

Product Groups

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. VINTAGE CARBON Pre-order Opportunity - NEW S30 CARBON FIBER FRONT GRILL! We have been cooking here at Vintage Carbon! We are going to be coming out with an ALL NEW Carbon Fiber S30 Grill! To our knowledge, this will be the First Ever Carbon Fiber Grill made for the Datsun S30 Platform! We are going to incorporate the Thick Outer Border similar to the Fairlady 432 Style Grille, while keeping the OEM "V" shape and OEM style straight across Slats all made completely of Carbon Fiber!! The slats will be thicker so you can really see the Carbon Weave from the front. We are also going to extend the overall height about 3 inches to make sure it covers as much as possible with a front air dam installed. We are going to ensure the vents are spaced equal to OEM so air flow will not be affected. It will be different from anything out there, more aggressive yet reminiscent of OEM but made of Carbon Fiber right here in So Cal, USA!! These will really add style to any S30 Z Front End!! What do you guys think? We will be accepting pre-orders for a heavy discount off Retail cost for the first 10 people. Contact me if interested! Message me or Email me at andrew@zociety.org ! We are currently working on a high quality render as we speak! Hoping to have that ready by the end of this week.
  2. After looking everything over and doing some digging I came to the conclusion that using 65 mustang hubs on 240z spindles is not a cost effective solution for big brakes. I am now looking into a ball joint adapter that bolts to the control arm of the 204z and uses press in 2014 mustang ball joints. I intend to use this in conjunction with 2004 Subaru wrx coil over struts to allow the use of 5 lug 2014 mustang hubs and brakes. Which are 5x114.3 The intent is to have the outer wheel mount flange be pushed out roughly 35mm.... effectively converting our cars from a "zero offset" wheel to a "plus 35mm" wheel... aka just like the 300z and the 240sx, Toyota supra etc... It's a front steer, rear caliper spindle just like the stock 240z, once I know what the bump steer geometry will be I will have a clearer picture of things. Someone could use a widebody or flared setup if they chose to run a zero offset wheel, or use cheap and readily available 350z wheels and have stock track width. Let me know if anyone has any input on this. Good idea, bad, etc...
  3. Hey all. I've lurked for a while and have had a few other Z's. My last was an LT1/T56 setup. This time I am going a little weird for the swap. I bought the shell with no motor and in quasi rough shape, but was relatively rust free so I jumped on it. I initially started going with an LS, and had it installed when I thought what would make ME happy. I am a big VW guy and had a Corrado SLC before this project. I have a lot of fond memories in my Corrado so I decided to mix the best of both worlds in the S30. It will be getting a 12V AAA VR6 motor with gt35 turbo. For the transmission I am using a B5 Audi S4 01E 6 speed converted to rwd. BBS RS 16" wheels are at each corner from a Porsche 968 with wider lips in the rear. Behind the front wheels are Toyota brake caliper upgrades. The rear fenders are being widened with Ztrix fiberglass subtle setup. The interior is getting Sparco R100 seats and a Corrado dashboard with Speedhut gauges with gps speedo. This is all a work in progress, but I will be posting to my instagram account as I make any progress. I wanted to introduce myself and share what I am very glad to be building https://instagram.com/240z_idiot
  4. Hey all, Hope you’re good. I’ve been browsing the forums a lot but I’ve not really seen anything specific to the swap that I’m doing. I have a 280z and a 2JZ-GTE VVTi and not sure whether to mate with either a T56 Magnum F or a CD009. Please feel free to direct me to a thread which can answer what I’m outlining below! These would be my two options both brand new. Either Grannas T56 MF kit or the Collins/Autosports CD0009 adapter kits.. I’m based in the UK with a LHD 1977 280Z. We don’t really have any long stretched roads in the area that I live in - lots of twisty roads and sharp turns let’s say. Not really too fussed about cruising and fuel economy as this will not be a daily. I’ll be looking to build this primarily for street and to be able to take on track occasionally. I will be doing a single turbo conversion and looking to push around 500-600bhp max. I’m really stuck between both CD009 and T56 MF and what would be better suited to what I want to build the car for based on the conditions above (I guess for the type of roads and possibly track, shorter gears are better?) I’m also quite unsure on which diff I should go for that will make the most out of whatever transmission I decide on. Do you guys have any thoughts as to what is the best pairing would be for the 2JZ in terms of transmission and diff? Can I stick with the long nose R200? Or do a SN R200 conversion, 8.8 conversion… etc. There are a few bits that’s I’ve read about general pros and cons on another forum but haven’t managed to find technical pros and cons/justifications that is specific to my chassis and swap. I’m not sure how much of that information I can take to crossover with my build so I just would rather ask to make sure. I’m sure I will gain some insight here from you knowledgeable people! Please let me know if you need any more info from me! Thank you very much. SS
  5. Hello Hybridz Members! Three piece spoiler for Datsun s30 240z 260z 280z Product is made from fiberglass with a flat black primer finish. Hence, spoiler is not a finished product ready for paint. This spoiler has 2 mount holes in center piece and 2 on each individual corner. It also has 2 threaded inserts in center piece and 1 on each individual corner.Quality and fitment are really good, all spoilers are brand new and never installed. some modification might be needed for perfect fitment. Price $280 shipped! - I can provide a discount for a group buy (5 minimum) Item ships from California* Local pick up available Payment: Paypal or cash for local pick up Any questions please feel free to send a PM
  6. While driving around the coast I noticed my car (1975 280z 2+2) has started making a repetitive spring-like squeaking sound that gets faster as you drive. But it only makes sound under acceleration, and only when driving forward. Also, it is less noticeable at higher speeds. However, it isn't that loud. So, it could be that it stops, or it could be that the engine and road noises drown it out. It sounds like it is coming from the PS rear-quarter? The car does not squeak when going over bumps or when I bounce the corners of it. I am on a trip at the moment so I can't examine it. Does this sound familiar to any of you? At this point I am thinking, brake... maybe axle related?
  7. Just ordered the TTT 300mm Big Front Brake Kit, Anyone have any ideas as to what wheels fit without spacers. Would prefer 15's over 16's and without fender flares. Thanks for the help
  8. Hello everyone, my name is Brandon Henness. I've building a 240z for the past 7-8 years and I've finally "finished" it. I've made a build gallery on imgur if you're interested in checking it out. Otherwise here is a before and after of my car. It's swapped with an LS1 and a T56, upgraded suspension, big brakes, chromoly stub axles and CV shafts, self made PCB LED taillights, and much much more. I'm currently entered in SEMA BOTB Young Guns and I'm trying to accumulate some votes so I can win a spot at SEMA in 2021. You can vote for me by following this link, you can vote every 24hr until October 25th at midnight. Thanks Everyone!
  9. I recently acquired a late model FS5W71B 5-speed that supposedly came out of a 280ZX. It definitely has the right bellhousing bolt pattern, the single ear exhaust hanger, the reverse check plate, and the tall ears for the shifter. I've put it in 5th and counted input shaft to output shaft ratios, and confirmed it's the .745:1 5th gear. Based on the research I've done on this site and others it sounds like it should bolt in just fine, but I need to make sure I use the pressure plate and throw-out bearing out of either one or the other and not "mix and match". I have a completely new clutch/PP/TOB (Exedy) that I had bought for my 4 speed, and am guessing that it should be OK in the 5 speed? Can anyone confirm this? Also, the breather has broken off flush with the case. Any advice on removing the stub? The 5-speed came with a slave cylinder, should I use that one or my 4-speed's, or is there no difference? Looking at this web link http://www.atlanticz.ca/zclub/techtips/shifterbushing/index.html I do have the weird oblong shifter (bottom picture, right side) from the 5 speed. Does anyone have any idea what that internal spring is supposed to do in relation to the bushings? Is it one of those push-down to engage reverse features? Finally, this transmission only has one electronic sensor installed, up near the front (Reverse switch I believe), and nothing else. There looks like maybe something should be in the rear, and possibly got broken off. I need to do more cleanup in that area to be sure. I downloaded a copy of the '83 FSM from Xenon and the MT chapter shows 4 sensors! (Reverse switch, Top Gear Switch, O.D. Gear Switch, and Neutral switch.) In all the pictures of these transmissions I have found on line I have never seen 4 switches installed on the side of these transmissions. Does anyone know what the deal is on what reality appears to be VS what the FSM is calling out? In my picture the 5-speed is on the left, the 4-speed is on the right, The shifter with all the tape around it is the oblong one out of the 5-speed. The boss that is up from the tailshaft on the right of the center casting part line (red arrow pointing to it) is full of crud and I suspect where the neutral switch should be installed. Is there ANYTHING that anyone can advise me on in regards to making this swap successful? Pitfalls? "Gotchyas"? "As long as you are doing this you may want to..."? Thanks!
  10. Recently aquired a 1972 240z with 108,112 miles. Having an new extra vg short block laying around and a set of cima heads and manifolds, I decided to swap the vg into a s30. Not sure on what turbo I will run, but im looking into compturbo 6262, or a borgwarner s200. Looking for around 550-600hp. Heres my list so far: Stock motor with ported cima heads and jwt springs relocate position of turbo from driver to pass. side (not enough room to keep on driver side) aeromotive fpr walbro 485 pump -6 feed and return line id1000 injectors compturbo or borgwarner turbo custom top feed fuel rail turbosmart wastegate boost controller R32 gtr front brakes calipers with custom bracket (I will be running 16" so I will try to fit the largest rotor in them. custom intake manifold with q45 throttle body had a pair of ARC z32 intercoolers laying around that I will have modified to a single. z32 brake booster, master cylinder and possibly pedal z32 clutch master and possibly pedal possibly z32 diff installed and thats where im at now. The paint on the car will be redone. I purchased a new center console, new seals from black dragon and a bre rear spoiler. The respray will be porsche's carrera white
  11. Hey all. So I have had my 1977 280z for around 7 years now. Drove it for a couple when I first bought it. Started having issues with the L-Jet system. Spent a while troubleshooting but the more I fixed the more I found items that needed fixing. Ended up moving into an apartment, then bought a house, sold the house, etc. barely worked on it for a few years. My now fiance and I bought a farm house with a big ole workshop (about 2500sqft, 3 bays, 1 dumptruck bay) and I got back into making my dream car just that. I decided now was the time to do it right. My Z had rotted floors, rotted frame rails, rotted fenders, rotted firewall. tons and tons of structural rot. Good thing I am a welding and metallurgical engineer and have plenty of fabrication equipment and experience (I hope). I cut out both floors, the firewall on the passenger side, fender well, and patched the "torque box" area of the frame in front of the firewall...one panel at a time. Most of these welds have been gas backed or flux shielded, or copper backed. Derek Macheski provided the floor support rails for my build (I think hes on here somewhere) as a partial trade for my motor. I am pairing my Z up with a Ford 5.0 small block V8. The donor vehicle was a 2001 mercury Mountaineer which means this is the highest performance factory 302W offered but also brings up some challenges; 1: The heads are GT40P heads which requires special or custom headers. The only headers currently manufactured that fit correctly are long tubes which will not fit the S30 engine bay. 2: The upper and lower intake are quite tall and require the engine be mounted somewhat lower in addition to possible hood clearance modification. 3: The engine is returnless and distributorless and I will be using the factory EFI harness and ECU, tuned with protune and probably a Moates QH chip. The current state of the build: I have completed most of the fabrication work, a few odds and ends that need to be finished but nothing major. I have the engine, transmission, and headers all in the vehicle and everything seems to fit. I am currently working on thinning the EFI harness of all unnecessary equipment using an old factory electrical schematic and some help from the folks over at the explorer forums.
  12. Wanted: 240z, 260z, or early model 280z. I need one with all glass and a body with no major damage. Rolling body with a dashboard is a big plus. Im located near sumter sc, and can have family look at cars near louisville ky.my max price range is 8k.
  13. Hello Everyone. I am looking to purchase an S30 with a manual that is in decent shape. Don't care about model (Coupe or 2+2) or year. Just an S30. Not too much rust or no rust and something that runs. It can be ugly just want to not have to do tons of rust repair. I'm looking for a light project not a complete ground up overhaul. I'm located in Coal City, IL. My contact information is bkhansen93@gmail.com or 8154053050. Will be willing to speak to anyone who has something to sell. Just reach out to me.
  14. I'm highly interested in buying this 260z I found on craigslist. There is nearly no rust aside from some surface stuff on the hatches. It's a pretty clean car but there is a big dent on the passenger side fender. The current owner says it was (likely) a parking lot mishap from the previous owner. My question is how much would a replacement passenger side fender cost for a 260z? How much would it cost to replace it? Thanks!
  15. Great to have found HybridZ Forums. Have been reading lots of useful zinformation for 2-3 hours and decided to register. This red ‘77 280Z is my 4th Z recently purchased in November 2018. In my late 20s to early 30s I owned a ‘73 240Z, ‘75 280Z and ‘74 260Z in that order. Of course they were fairly new back in the day. That’s me in 1979 with my silver ‘75 280Z. Wish I could have kept it. LOL Yes, I absolutely love these beautiful S30 Datsuns. Look forward to the forums here being a great resource for maintaining our 40+ year old cars. It’s a passion and love affair!
  16. After much thought on whether or not I wanted to create a full thread of my first 240z build I have decided that it would be worth it in the long run and nice to look back to. I will have about a year to catch up with then I will continue to update as the build goes on. Backstory: I bought this Miata when I was a senior in high school. I wanted to see if I was truly passionate about cars and if I enjoyed working on them/driving them. This car was a blessing and a curse, I quickly found out that I loved cars and all of my money would be taken by them. Fast forward and I had supercharged it with all the basic Miata mods. The car was extremely fun, but it was not a car that I saw myself keeping for the long run and I had this long list of parts/mods I wanted to do to it. I had always wanted a few cars but they were just out of my price range; 240z, s2000 and a few old muscle cars. I thought about it and decided that if I was going to pour tons of money and time into a car I wanted it to be a car I wanted to keep and loved the looks of, not just enjoyed the drive. Once I had made this decision I was a sophomore in college and began the long search for a Z. I spent about 9 months of searching everyday for a s30, primarily looking at 240zs.
  17. Link g4+ monsoon stand alone ECU,Panic Wire harness,10lb flywheel, 264 cam shafts, Head ported (intake side only), Adjustable cam gears, Eclutchmasters 6 puck unsprung clutch and pressure plate (stage 4)Drift Motion turbo kit Billet 6262 turbo (Garrett internals), manifold, wastegate tial replica, and 3" downpipe, Hks bov replica, Aeromotive fuel pressure regulator, 440cc injectors,Bosch 044 fuel pump, Arp head studs, Aem wideband Short throw shifter, a/c and p/s delete (shortened serpentine belt and new ribbed pulley on tensioner),vvti coils wasted spark setup, CX racing intercooler ,
  18. Looking for some advice before I dive head first into the engine bay. It is a 1977 280z pretty stock minus headers So I had accidentally left my head lights on. So, of course, my battery died. I tried to jump start the car and it cranked and smelled of gas but wouldn't turn over. I figured I might have flooded the engine for trying to much so I let the car sit for about 24 hours. I brought a new battery (tested and all so I know it works) and it was the same problem. The engine cranks and I smell gas but it won't actually turn over. The ignition coil has spark. The distributor has spark. But it just won't turn over. Any ideas of what to check? Also I should add the for about a week and a half before this happened my car has been running a bit rough. It just started out of nowhere. The engine has a bit more shake to it and there seems to be a good loss of power. I kind of suspected the water temp sensor since I had a problem with it in the past. I replaced it's plug but not the sensor itself. And if I ever touched it while the car was running it would cause a rough idle. Anyways if anyone can give me some advice it would be much appreciated. I'd just like to add that I'm a young car enthusiast. I know my way around a wrench (I've changed the intake and exhaust manifold myself and cleaned up some wiring) but I'm far from an expert. And I know very little about the science of electricity.
  19. I've always wanted to see a philosophy thread on HybridZ. It never ceases to amaze me how unique and quirky the Datsun following tends to be... and even more so how much we have in common despite are differences in backgrounds, etc. There are a lot of generalizations that can be made about people drawn to American muscle cars, German performance and luxury, etc. In my experience Z owners tend to be very smart individuals relative to the general population as well as automotive enthusiast groups. (Clearly we have fine taste.) This could go a number of philosophical directions, about kindred human passions, the living spirit of Mr. K, the brand of Datsun's emergence after WW2's bombs, the commonality between Z owners.... you could even present an esoteric possibility such as Z owners' souls tend to come from the same quadrant of the galaxy or something about how HybridZ [sometimes] epitomizes focused, collaborative human achievements. All are of interest to me... but rather than lay my interests and thoughts out, I'd like to ask if others have had any similar observations and have pondered their implications or meaning?
  20. Hello Everyone, I bought a 1971 Datsun 240z, about 2 years ago as my first project car. The more I started to dig into the car, the more I wanted to repair and improve it. Initially I was just planning on getting it running and using it while slowly upgrading and repairing it. I ended up tearing it down to the bare chassis, mounting it on a rotisserie and media blasting it. After I media blasted it, I decided to replace the floors and upgrade the frame rails with baddog frame rails. I sat down and thought about what I wanted the car to be and I came up with a ton of ideas, but ended up narrowing it down into one vision. The vision is this(nicknamed ProjectWhiteNoiseZ): My vision is inspired by modern Nissan Nismo styling, but it will be powered by a 2JZ-GTE with a cd009 transmission. I have gone through every part and media blasted and powder coated it or upgraded it with something better. Doing all of this, inspired my brother to buy a crashed 2008 Mustang GT and the current plan is to complete our cars by August/September '18. I live in Colorado and he lives in Pennsylvania, so I'll be road tripping the 240z 1700miles each way when complete to meet him at a track in Pennsylvania and race. If you're interested to see the work and follow our journey to complete our cars over the next few months, we have a YouTube channel, Facebook, and Instagram where we're documenting our builds. Any comments on suggestions for YouTube video improvements are appreciated. We will answer any questions you have. YouTube: https://www.youtube.com/channel/UCJt7v6VEHBqNPweO_cZ1guw PBB Instagram: https://www.instagram.com/projectbuildbrothers/ PWNZ Instagram: https://www.instagram.com/projectwhitenoisez/ Facebook: https://www.facebook.com/ProjectBuildBrothers/
  21. Just finished the first 2jz crossmember for a customer on here!!
  22. Selling my 1973 Datsun 240z on Bring A Trailer. https://bringatrailer.com/listing/1973-datsun-240z-43/ LS1 engine, T-56 transmission Exterior: White 2,400 miles since rebuild Located in San Diego, CA More details on bring a trailer in link above. Contact: John DM for contact info and questions.
  23. Hi everyone, I've been having some issues with my door that I'm trying to fix but frankly I need some help with what I can actually do to fix it. I made a video showing and telling the issues I have: My hope was some folks on here could watch it and give me some guidance as to what exactly is wrong and how to fix it. Thanks, - Pac Man
  24. I've embarked on the installation of a Vintage Air evaporator, using John's Cars compressor and mounting, and a stock copper condenser out of a 280Z. I like the condenser because it is a perfect fit.. bolts in with existing bolt holes and the high and low pressure line align with the radiator mount. This unit has been stored for a number of years with duct tape covering the orifices of both lines. The lines appear to be 37 degree cone and very similar to either jic or an fittings. Does any know what standard fitting was used on 280z condensers? I need to match my condenser (37 degree or so cone) to the"O" ring fittings of the compressor and evaporator unit. Does anyone know of any adapter that might make the transference. Finally, local a/c guys advise me to ditch the 280Z condenser in favor of a newer after market AL unit with "O" ringed fittings. The reasons they give are: 1. the high and low pressure fitting, being a flare of some degree, are inadequate and will leak refrigerant; that the copper construction does not transfer heat as well as AL, and that my 280Z condenser is contaminated by the oil that was used in the '70s and can not be adequately cleaned or used with the current refrigerants. So can anyone tell me: 1. What standard are my condenser's fittings? Are they JIC? 2. Are the newer refrigerants (134a ?) incompatible with flare fittings? 3. Is oil contamination a real problem or is it something that can be cleaned up by any radiator shop? I've read Tony's discussion of CU versus AL and condenser sizing, so I don't see the construction or size to be a problem. thanks,
  25. I need some help. I purchased a Skillard s30 splitter for type 1 air dam and can't seem to install it. Here's my combo: 73 240z MSA urethane air dam - http://www.thezstore.com/page/TZS/PROD/classic02a01b/50-1411 Skilard Splitter - https://skillard.com/products/240z-260z-280z-front-lip-splitter the problem? The bolts that should go into the core support aren't the right size The sway bar is in the way The biggest problem, the splitter wont even mount up flush onto the core support, its off by many inches The air dam appears to be way lower that those of the pictures I've seen, so when i pull up the splutter to the bottom of the air dam, it doesn't come up to the core support to allow it to mount up. One thing I know will get in my way - the previous owner hacked in some radiator supports that are lower than the stock core support - so I'll have to make some adjustment there. Does anyone have pictures of the core support and the mounting holes I should be using? Does this air dam even work with the splitter? Did i completely F it up by buying two incompatible parts? I'll try and take some pictures but without more hands it'll be hard to show the gap... Helps!!!
×
×
  • Create New...