Jump to content
HybridZ

Search the Community

Showing results for tags 'Diff'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical
    • FAQs
    • Model Specific
    • V8 Z Forums
    • 6 Cylinder Z Forums
    • Other Engines
    • Engine Components
    • Body Kits & Paint
    • Windtunnel Test Results and Analysis
    • Brakes, Wheels, Suspension and Chassis
    • Drivetrain
    • Fabrication / Welding
    • Interior
    • Miscellaneous Tech
    • Trouble Shooting / General Engine
  • General
    • Announcements
    • Non Tech Board
    • New Members Forum
    • Members Projects
    • Motorsports / Events
    • Buy / Sell / Trade
    • Group Buys
    • Vendor's Forum
    • Links
    • Site Support

Blogs

  • Blog 7794
  • Blog 7796
  • Blog 7797
  • Blog 7801
  • Blog 7810
  • Blog 7821
  • Blog 7850
  • Blog 7876
  • Blog 7900
  • Blog 7903
  • Blog 7918
  • Blog 7945
  • Blog 7995
  • Blog 8097
  • Blog 8113
  • Blog 8124
  • Blog 8199
  • Blog 8217
  • Blog 8223
  • Blog 8239
  • Blog 8335
  • Blog 8424
  • Blog 8478
  • Blog 8501
  • Blog 8644
  • Blog 8751
  • Blog 8853
  • Blog 9074
  • Blog 9088
  • Blog 9095
  • Blog 9152
  • Blog 10389
  • Blog 10579
  • Blog 10681
  • Blog 10929
  • Blog 10956
  • Blog 11195
  • Blog 11737
  • Blog 11794
  • Blog 11853
  • Blog 12120
  • Blog 12435
  • Blog 12884
  • Blog 13129
  • Blog 13159
  • Blog 13200
  • Blog 13472
  • Blog 13567
  • Blog 13587
  • Blog 14207
  • Blog 14439
  • Blog 14625
  • Blog 14703
  • Blog 14909
  • Blog 14919
  • Blog 14975
  • Head Gasket for 3.1 liter stroker engine
  • Blog 15298
  • Blog 15393
  • Blog 15520
  • Blog 15602
  • Blog 15654
  • Blog 15717
  • Blog 15865
  • Blog 16224
  • Blog 16227
  • Blog 16485
  • Blog 16662
  • Blog 16809
  • Blog 16878
  • Blog 16923
  • Blog 17059
  • Blog 17103
  • Blog 17116
  • Blog 17333
  • Blog 17402
  • Blog 17506
  • Blog 18026
  • Blog 18084
  • Blog 18466
  • Blog 18819
  • Blog 19188
  • Blog 19475
  • Blog 19671
  • Blog 19685
  • Blog 20165
  • Blog 20200
  • Blog 20239
  • Blog 20330
  • Blog 20345
  • Blog 20475
  • Blog 20568
  • Blog 20611
  • Blog 20767
  • Blog 20885
  • Blog 21113
  • Blog 21316
  • Blog 21355
  • Blog 21400
  • Blog 21541
  • Blog 21630
  • Blog 21672
  • Blog 21712
  • Blog 21925
  • Blog 21950
  • Blog 22036
  • Blog 22272
  • Blog 22312
  • Blog 22331
  • Blog 23034
  • Blog 23042
  • Blog 23220
  • Blog 23246
  • Blog 23322
  • Blog 23406
  • Blog 23570
  • Blog 23700
  • Blog 23718
  • Blog 23737
  • Blog 23762
  • Blog 23794
  • Blog 23917
  • Blog 23956
  • Blog 23959
  • Blog 24064
  • Blog 24131
  • Blog 24139
  • Blog 24205
  • Blog 24221
  • Blog 24240
  • Blog 24430
  • Blog 24435
  • Blog 24495
  • Blog 24576
  • Blog 24643
  • Blog 24722
  • Blog 24770
  • Blog 24833
  • Blog 24848
  • Blog 24853
  • Blog 24872
  • Blog 25030
  • Blog 25248
  • Blog 25289
  • Blog 25373
  • Blog 25396
  • Blog 25527
  • Blog 25674
  • Blog 25853
  • Blog 25886
  • Blog 25922
  • Blog 25986
  • Blog 26129
  • Blog 26181
  • Blog 26217
  • Blog 26240
  • Blog 26247
  • Blog 26299
  • Blog 26401
  • Blog 26440
  • Blog 26559
  • Blog 26735
  • Blog 26736
  • Blog 26831
  • Blog 26844
  • Blog 26883
  • Blog 26884
  • Blog 27002
  • Blog 27028
  • Blog 27169
  • Blog 27260
  • Blog 27267
  • Blog 27307
  • Blog 27345
  • Blog 27400
  • Blog 27428
  • Blog 27452
  • Blog 27558
  • Blog 27622
  • Blog 27707
  • Blog 27735
  • Blog 27877
  • Blog 28049
  • Blog 28070
  • Blog 28199
  • Blog 28214
  • Blog 28234
  • Blog 28308
  • Blog 28320
  • Blog 28475
  • Blog 28476
  • Blog 28494
  • Blog 28657
  • Blog 28671
  • Blog 28814
  • Blog 28880
  • Blog 28923
  • Blog 28943
  • Blog 28945
  • Blog 28982
  • Blog 28993
  • Blog 29008
  • Blog 29036
  • Blog 29168
  • Blog 29412
  • Blog 29467
  • Blog 29618
  • Blog 29710
  • Blog 29759
  • Blog 29832
  • Blog 29868
  • Blog 29922
  • Blog 29950
  • Blog 30009
  • Blog 30027
  • Blog 30175
  • Blog 30182
  • Blog 30287
  • Blog 30302
  • Blog 30339
  • Blog 30443
  • Blog 30461
  • Blog 30474
  • Blog 30517
  • Blog 30556
  • Blog 30654
  • Blog 30729
  • Blog 30758
  • Blog 30773
  • Blog 30842
  • Blog 30872
  • Blog 30886
  • Blog 30989
  • Blog 31027
  • Blog 31048
  • Blog 31073
  • Blog 31109
  • Blog 31116
  • Blog 31138
  • Blog 31251
  • Blog 31307
  • Blog 31343
  • Blog 31378
  • Blog 31393
  • Blog 31432
  • Blog 31495
  • Blog 31507
  • Blog 31592
  • Blog 31626
  • Blog 31643
  • Blog 31692
  • Blog 31717
  • Blog 31760
  • Blog 31768
  • Blog 31777
  • Blog 31826
  • Blog 31851
  • Blog 31877
  • Blog 31907
  • Blog 31942
  • Blog 32009
  • Blog 32051
  • Blog 32073
  • Blog 32094
  • Blog 32111
  • Blog 32142
  • Blog 32169
  • Blog 32198
  • Blog 32250
  • Blog 32256
  • Blog 32259
  • Blog 32262
  • Blog 32291
  • Blog 32371
  • Blog 32417
  • Blog 32463
  • Blog 32515
  • Blog 32519
  • Blog 32562
  • Blog 32678
  • Blog 32695
  • Blog 32725
  • Blog 32981
  • Blog 33294
  • Blog 33517
  • Blog 33612
  • Blog 33734
  • Blog 33993
  • Blog 34018
  • Blog 34140
  • Blog 34452
  • Blog 34586
  • Blog 34855
  • Blog 35117
  • Blog 35378
  • Blog 35742
  • Blog 35956
  • Blog 36022
  • Blog 36030
  • Blog 36711
  • Blog 36997
  • Blog 37069
  • Blog 37070
  • Blog 37103
  • Blog 37166
  • Blog 37257
  • Blog 37645
  • Blog 37818
  • Blog 37954
  • Blog 38369
  • Blog 38569
  • Blog 38681
  • Blog 38923
  • Blog 38945
  • Blog 39122
  • Blog 39441
  • Blog 39494
  • Blog 39529
  • Blog 39575
  • PSL_240z's Blog
  • Phlebmaster's Blog
  • dhp123166's Blog
  • miguel240zcruz's Blog
  • dsalni's Blog
  • dsalni's Blog
  • beon's Blog

Calendars

  • Community Calendar

Categories

  • Configuration File Sharing
  • Drawing Files, Templates
  • Manuals, Diagrams, Guides
  • Software, Calculators
  • Other misc files

Product Groups

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 16 results

  1. The story of how it all began, including pictures of ugly prototypes and crude early versions... What it all amounted to is a simple, strong bolt in swap that utilizes factory control arms and r200 mustache bar and allows the use of 2015 mustang brakes, hubs, cv axle ends and differential. The pinion yoke is a 1350 u joint one off a 1993 f250, it can be found at Denny's drivetrain. The struts that work with this setup are modified 2004 srt4 neon struts with their tops changed to the datsun 3 bolt camber plates. Most people simply contact bc racing and have them supply the 280z coilovers and exchange the bottom sleaves with the 2004 srt4 neons ones. Other people just use the coilovers they have and weld on the coilover tabs I also developed, so struts that work are basically anything you want. The brakes are either 13 inch rear brakes off a 2015 mustang or 11.8 inch brakes off a 2014 mustang. Both are dirt cheap, and both have a built in parking brake. I'm constantly updating the design with every batch, but here is what one of the components for a tacked cradle looks like. Pictured here is version 6, and the cradle bolted to the differential is version 4 I believe. *** Here's a picture of what it all ended up being in the end.
  2. Looking for a finned cover for my R200 LSD. Preferably in good shape without any broken fins.
  3. I have an 1989 3.9 R200 long nose. I need a good reliable LSD and I want CV's if possible. I bought an OS Giken NS046-HA LSD for a short nose R200. It is for a 1991 240SX open diff. I have used this diff numerous times in SX cars up to 450whp with good results so I wanted to see if it would go in a long nose. I put on new carrier bearings and used the original shims in the same locations. The ring gear bolts are smaller than the holes in the LSD but it is hubcentric so I just bolted it on. I have done this on SX diffs numerous times with no issues. There are spacers available if this worries you. The backlash and preload were within specs. First thing I noticed was the thick spacer is on opposite sides in the 2 diffs. This had me worried since the stub shafts are interchangeable between the 3 (280Z, 240SX, Z31ZXT). I tried these stub shafts in all 3 diffs. The groove is slightly wider on the SX stubs so I widened the groove on the Z31 shafts. They worked and locked in either way but the Z31's were very hard to get back out and a wider groove with slightly rounded edges matched the SX grooves better. I bought the Z31 axle shafts and flanges from Checkered Flag Joe. They are very beefy. It was no big deal to change shafts. Pull the c clip on the outboard end. Knock the inboard end off by hitting on the race. Change shafts and put it back together. The flanges are much heavier than stock and a tighter fit on the stock 280Z stub axles but went on with minimum fuss. The Giken's are very good and tunable diffs. They drive like stock, with no chattering, on the street but hook up great. They have 20 or so discs. Actually the steels and clutches are all steels but it works. I use Redline NS oil in them for the first 300 miles and then change to Giken fluid. It is very spendy. I couldn't find if this would work or not so thought I would share my experience. It works. Be sure to use an aftermarket LSD for an open diff SX and any one should work in a log nose R200 with either Z stubs or Z31 axles.
  4. I'm looking for a complete s15 helical lsd. Inculding the pumpkin and stubs.
  5. Hey anyone running a obx lsd in a r200 using the 280zx turbo or 300zx tripod axles? If so is your passenger side axle slightly floppy? Were the axle goes into the diff the last 10-12mm that enters last has a step up on it before the actual tripod housing has play there and the axle can be grabbed and moved up and down some. Its not just me znke has the same problem! Does the small step portion of the axle seat into the diff or does it float and the only thing holding the axle straight is the splines and wire clip? Anyone?
  6. Hi. Looking for an R180 with limited slip, 3.9:1 ring & pinion which doesn't need immediate admission to the Intensive Care Unit. Alternatively, could do with a fresh LSD unit to install in my existing 3.9:1 R180. Also, unlikely to find one, but looking for an Electromotive XDi (or XDi2) distributor-less ignition system for six-cylinder (box, three-coil unit, trigger wheel). I'm in Phoenix. Thanks.
  7. I am looking for an R200 rear differential for my 76' 280z. I need a direct bolt-in unit or one with all the parts to make it fit in my 280z. I would prefer it to be LSD of some sort and a gear ratio of either 3.90 or 4.11 to match my 280zx 5-speed transmission. I am located in Northeast Ohio.
  8. Looking for an R180 open 4:38 diff (marked with a K on the top of the case). I will be replacing all the bearings and seals so that is not a concern. Shipping will be to 01730. Email to: john@baddogparts.com
  9. Hi, Looking to buy a transverse mount for an R200 swap into a Series 1 240z. Preferably in the SF bay area or in California so I can drive and pick it up/cheap shipping. Thanks, Liam
  10. Ok so I've got some basic tire on my can now and I'm like some input on what I can expect out of the rear components in my 260 with what I want to throw at it. I have an early '74 260z with an open r200 (I THINK 3.90) diff...i believe the halfshafts/axles are out of a 280...but may be the stock ones from my car. I'm running a ~500hp(crank) 383 and a built/kitted etc TH350(shifts pretty damn hard). So far everything has held up well under pretty aggressive driving..I just put brand new street tires on it and can finally start to grab OK in 1st gear. My driveline was also custom made and should be one of the stronger parts in my drivetrain...leaving the axles as the weakest link i think. My question is this...how likely am I to hurt any of the axle parts with these street tires and my automatic? Both on the street and at the track (assuming i hook pretty well)? Have any of you broken them in the middle of a pass? (not off the line). I also would like to put maybe a 150 shot on the motor, as the motor was running on nitrous regularly in the previous car. I'd be looking to squeeze probably in 2nd gear...and I'm wondering if even that might be enough to shock one of those parts enough. Any input is greatly appreciated. Thanks!
  11. looking for a clsd 3.7 or 3.5 diff from a 84'-89' 300zx .
  12. Hello, I am looking for a mustache bar from a 280z or late 260z, has to be for r200. Sorry to all the people that contacted me before about this, I thought I had an r180 but as it turns out I have an r200. Thanks, Cooper.
  13. WTB Z31 Turbo LSD (87-89) and 16x8 +0 Offset 4x114.3 Enkei 92s Open to other kinds of wheels, but they need to be those specs,. Could go 17 or slightly different offset, but must be an 8 inch or bigger wheel and fit a lowered 280z. Please reply to this thread and I will get back to you! Thanks, -Travis
  14. I do recognize that this topic has been documented many times before, and believe it or not, I've read most (if not all) articles pertaining to this, on this site and others. But it is clear as mud. Here is my guarantee: if I can find help here, I will make a VERY PRECISE and WELL PHOTOGRAPHED swap so that others in the future aren't as confused as me. I own a 1971 240z, and I want to drop the the R200 that came out of a '94 Q45 (there has been even people speculating that the Q45 had a R230, but from most sources, it is an R200). I've retained the inner CVs with a 6-bolt flange pattern - the halfshaft axles and outer CVs are gone. Someone I know is parting a 1979 280ZX, and the diff has already been picked by someone else. I was thinking I could grab the moustache bar, front diff mount and rear control arm hanger, but some documentation suggested that only up to 1988 280Z (not X) moustache bars would bolt in. Will a 1979 280ZX moustache bar bolt into my 1971 240z and accept the R200 from the Q45? Is the front diff mount and rear control arm hanger worth picking from this 280ZX? As apparently the CVs weren't implemented in the N/A 280ZX (this car has u-joints), I'd like to use other CVs. Someone else has Z32 300ZX (n/a) half-shaft axles - they have a 5-bolt flange on the differential side, and just the one-piece CV/stub axles on the other (is there a proper name for this?). some documentation says that the Q45 CVs accept 30-toothed splines, which the Z32 TT has, but not the N/A version (which has 29). Really Nissan, REALLY? There has been some articles suggesting that pathfinder axles are a good fit (length-wise, tooth-count wise) - keeping in mind, I still need two wheel-side CVs on the 30-tooth splined axles. Then there are the dreaded stub-axles. Can I use the 280ZX stub axles and companion flanges in the 240z? On the companion flange side (CV-side), what bolt pattern will I be expecting? 6-hole (3 pairs)? Seems like I'll need to find either the proper outer CV to mate to it, or machine an adapter (which will affect the overall length). I am aware that several companies offer kits that would make my life easier, but I don't have thousands of dollars to throw at the rear end of the car right now. As a bonus question; is it worth getting the rear brakes off the 280ZX? I see many people have done it, except adapters must be machined to hang the calipers. Are the 280ZX housings the same, and could the whole thing be swapped into the 240z control arms? thanks so much, Sim http://www.geocities.com/jasonparuta/diffswap.html http://forums.hybridz.org/topic/70534-r-200-spline-counts-and-mystery-hlsd/
  15. wtb 300zxtt differentia r230 text 702-718-9052 thanks..
×
×
  • Create New...