Search the Community
Showing results for tags 'greddy'.
Found 3 results
1- First one is Brand New GReddy Turbo Timer with the Turbo Timer Harness Brand: GReddy Part number: 15500020 + 15920001 With Original Manual. I'm asking 90$USD shipped anywhere in Canada and 48 states. 2- Second is Brand New GReddy Profec B Spec 2 Boost Controller Brand: GReddy Part number: 15500209 With Original Manual in original box I'm asking 300$USD shipped anywhere in Canada and 48 states. I will prefer paypal payment for fast and safe process. Shipping will be done as soon as the payment will be clear. Regards Nismo_ZXT
Hey guys, I'm going different route about the engine. (RB NEO) It's time for some clean-up 1st is the TRUST/GReddy Single Turbo Manifold (BRAND NEW): SOLD Up for sale is 2x RARE L6 Turbo exhaust manifold for the Datsun 240Z 260Z 280Z 280ZX, L series 6 cylinder engine. Should fit on any L-series engine, even the old skyline GC10/GC110/GC210/HR30. This Manifold is made in Stainless Steel and the O.D. piping is 42.7 mm. It has a T4 Turbo Twin Scroll Flange. Very high quality. These are VERY expensive in Japan, over 2K in USD for a brand new one. This is not a cheap copy. It's original form Trust in Japan. I'm look for 1600$. Also they are designed for the RHD car. I can not guarantee the fitting in the LHD cars. You may have to modify the steering column to fit on LHD cars. This is a big manifold and the turbo is getting close to the suspension tower. It all depend on the turbo size you use. I would recommended to modify the steering shaft with a double u-joint extension fixed by 1 or 2 bearing eye bolt. Search here on hybridz for more info about this mod. It's been done to fit some V8 headers. 2nd is one of the rarest parts for the L6. The HKS ITB: SOLD Old school setup from the '80. HKS made it as a swap for the triple carbs (DCOE). Designed to be use with some turbo setup. (much more easy to use turbo on efi than carbs) It could be use as NA setup as well. Fit direct on any L6 airbox or surge tank like any DCOE. I'm look for 1200$ obo. 3rd is a modified SANYO/SK Sport Kit Intake runner: SOLD It can be use in few type of setup. NA / Turbo / Custom plenum box This intake runner has been modified. The L28 EFI manifold flange has been welded on it. So you can run injector on it. I will give everything you see in the pictures. I'm look for 350$ obo. 4th is the TOMEI Adjustable Cam Gear (BRAND NEW): SOLD As it said. It's the TOMEI cam gear. Brand new never mounted or installed. Still in the sealed bag Part number: 13024R500 MSRP at 220$ USD I'm looking for 175$ shipping include. 5th is the Nissan Comp AL Valve Spring Retainers (BRAND NEW): SOLD These are the same retainers they mention in the "How to Modify..." I purchase those from EvilC few years ago's Never used, never monted. I'm looking for 125$ obo In the next days I will post more L6 Rare/Awesome stuff for sales. Also if you're interest in more then 1 part, I can made a package deal. --------------------------------------------------------------------------------------------------------------------------- I'm in Qc, Canada and these parts are in my hand ready to ship. Shipping is on buyers expense, ask for quote and more info. Tracking, Insurance and Delivery Confirmation will be include in the shipping quote. I will prefer paypal payment for fast and safe process. Shipping will be done as soon as the payment will be clear. Please serious buyer only. Regards Nismo_ZXT
Hey guys, Let me give you a quick run down of whats going on here, please read the entire post before asking questions. I have a 76 280 that had a stock l28 in it and I was planning on doing an RB25 swap. My plans were a little too ambitious for my pocketbooks with still being in school and trying to purchase a house. It is time for me to cut my losses with the RB and go with something I am more comfortable/familiar with, not to mention less expensive. Almost every part is new and unused except where listed. Everything is located in Bernville PA. Prices are OBO. Some may be negotiable, I'm just trying to get back some of the money that I have into the swap currently. As far as getting pictures for each item is concerned I have found in the past that it is easier for me to email or text pictures of the items rather than posting them here due to my poor internet service for my laptop at home. So if anyone would like any pictures feel free to PM or email me cschlegel76 @ yahoo.com (no spaces please, I just did that so there is no hyperlink) or text me @ six one zero five six eight six eight zero two: 1. Intercooler - purchased new from ebay. 24 x 12 x 3in. Its pretty big and actually seems like pretty good quality for ebay. It's brand name is GodSpeed and like I said is a very nice piece. $150.00 obo 2. Rick Wong Motor Mounts - SOLD! 3. Trans mount - RB25 trans mount for a 280z. This was made by a member on here. Pat1. Everyone knows him, he makes the RB oil pans. Quality trans mount. $100.00 obo 4. RB Oil Pan w/ Pick up - This was also purchased from Pat1. Everyone knows you need a rear sump pan for the RB swap and Pat is the guy to go to for this. Pan is brand new nevery mounted and includes the oil pickup. Painted black by Pat himself, it also includes the silicone gasket sealant that Pat includes with these. $500.00 obo 5. Wiring Specialties RB25 into Datsun wiring harness - This is a quality harness made by wiringspecialties. It comes with the injector subharness as well. It is for a SERIES 2 RB25. Stock MAFS. Please note this when considering purchase. NIB Here is the site with more info on the harness. http://wiringspecialties.com/r33rbtoanyda.html $500.00 obo 6. Greddy Profec B SPEC 2 electronic boost controller - purchased used from ebay. Still in very good condition, I never used it but previous owner said it worked great. Comes with all the wiring necessary, the only thing you will need is vaccum hose. It also does not have instructions with it but can be downloaded on GReddy's website. $300.00 obo 7. RB25 ISIS intake manifold - Purchased new from the guys at Raw Brokerage. Pretty nice quality and comes with all of the nuts, bolts, vaccum ports, coolant ports, ect. needed to mount and run on the RB25. NIB. $375.00 obo Thats it for now, if there are any questions please feel free to contact me via PM, email(listed above, please remember no spaces in the email address), or text my number (listed above). Thanks for looking! -Christian