Search the Community
Showing results for tags 'headlights'.
-
I want to swap in some H4 lights and add LED bulbs. I see many types and cooling device configurations of led bulbs available, has anyone tried them? What mods were necessary? Results? IF YOU CAN PLEASE, mention the brand /type bulb you used. Thanks in advance!
- 15 replies
-
I wanted to post a Thank You to all those who have contributed their expertise about trouble shooting the Dead Light Syndrome on Z Cars. You know who you are. I'll share my experience - Hopefully it will help someone else. I have gradually been losing electrical component functions. Last week she stopped charging while cruising around. Voltage gauge gradually dropped to 10-8-6 volts.. Thankfully I have an Optima Yellow top and was able to limp back to the shop. This car has voltage regulator separate from the alternator, under the fusible link/beer can holder. With battery
-
One of my headlights went out and I figure its a good time to go ahead and upgrade them. I'm looking at these HELLA headlights and these HIDs. Does anyone know if I'd need to upgrade the headlight harness with either of these? Has anyone had any experience with these?
-
Need a 1973 headlight combo switch, im in nj so can drive or factor that for shipping Mine crapped out, i tried cleaning that little box with the tabs that controls the headlights and tail lights but the issues was with those little caps that cover the springs in the mechanism they were totally messed up and that whole box is kind of dead.... looking for either entire assembly or just the little headlight box with the rocker switches and those 2 springs with the little caps. Attached a pic of the box and the little caps over the springs, let me know what you have! car isnt really e
-
I was changing the headlights in my 78 280Z tonight and I managed to snap 3 of the 4 bolts that hold the headlight in (the ones with the flat head). Can someone please tell me the size, length, and pitch of these bolts so I can buy replacements? I also need to get the remaining bolts out. I am thinking pliers, because they protrude on the other side, but would a small easy-out be a better idea? Thanks!
-
From the album: New Parts
-
From the album: New Parts
-
- raybrig
- headlights
-
(and 2 more)
Tagged with:
-
From the album: New Parts
-
Wondering if anyone knows of place that makes newer connectors for the head/tail lights on the 260z? I've had too many issues with the old wiring harness and decided to pull it. Nothing was really hooked up or worked anyway. (SBC swapped) So I've wired up the ignition and such already and just need lights. I'd like to avoid using any of the original wiring so I want to get rid of the pigtails coming off the lights. Anything out there that directly fits in the Z head and tail light housings?
-
My son's 79' 280zx had HID headlights with projector lenses installed by the previous owner. In the past a headlight would go out and we'd replace the bulb or ballast and it would resolve the issue. Recently however the driver's side headlight went out and I can't seem to figure out why. It's getting power to the ballast (a little over 12 volts) and we installed both a new bulb and ballast but no luck. My question however is more in regards to the relay harness. All over the internet I see where a relay harness is used but in the illustrations they contain only one relay and only
-
UPDATE: After completing the install my alternator isn't charging the battery. Please see the post at the bottom of the page So I have a '75 280z and recently I've noticed my headlights get brighter when I rev the car. (Both in neutral at stand still and in motion) I also noticed that my dash lights and interior lights get brighter as well. The headlights are also very dim whether or not the car is revving or not, revving only brightens them a little and overall they're still dim. The A/C fan also gets louder and blows harder when revving. So somehow all of these problems are
- 8 replies
-
- battery
- interior lighting
-
(and 4 more)
Tagged with:
-
Hi guys. I'm at a bit of an impass with the headlights on my '77 280z and could use a little help. I did some searching here and elsewhere, got a lot of leads but nothing that worked so far All of my lights are working except my headlight. Turn signals, brake lights, parking lights all work. the combination switch turns the side marker running lights on and off but not the Headlights. fuses are good. Headlight bulbs show continuity with a mutimeter, and continuity from the stalk to the fuses look good and from the fuses to the headlight wiring looks good too. All the connectors
-
I do not ever remember seing a favorite headlight page. These are mine. The headlights are H-4 with 55 watt low beams and 100 watt high beams. The plastic headlight buckets were replaced with metal ones and welded onto the fenders. Riv-nuts were installed in the metal headlight buckets to hold the headlight covers in place.
-
Hey guys, im pretty new to the forums, hopefully yall dont bash down too hard on me when i ask about hid setups... ive tried searching through threads and such and have had no luck, not very used to these forum things. anyways i am in the process of buying a z from a guy near me in nc here and have already made a list of things i want to do lol starting with mechanical things to tighten up all the bushings and get all the potential rust areas sanded down primered and coated with bedliner etc.. was wondering what you guys that have hid setups have done? this is going to be a weekend w