Jump to content
HybridZ

Search the Community

Showing results for tags 'swap'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical
    • FAQs
    • Model Specific
    • V8 Z Forums
    • 6 Cylinder Z Forums
    • Other Engines
    • Engine Components
    • Body Kits & Paint
    • Windtunnel Test Results and Analysis
    • Brakes, Wheels, Suspension and Chassis
    • Drivetrain
    • Fabrication / Welding
    • Interior
    • Miscellaneous Tech
    • Trouble Shooting / General Engine
  • General
    • Announcements
    • Non Tech Board
    • New Members Forum
    • Members Projects
    • Motorsports / Events
    • Buy / Sell / Trade
    • Group Buys
    • Vendor's Forum
    • Links
    • Site Support

Blogs

  • Blog 7794
  • Blog 7796
  • Blog 7797
  • Blog 7801
  • Blog 7810
  • Blog 7821
  • Blog 7850
  • Blog 7876
  • Blog 7900
  • Blog 7903
  • Blog 7918
  • Blog 7945
  • Blog 7995
  • Blog 8097
  • Blog 8113
  • Blog 8124
  • Blog 8199
  • Blog 8217
  • Blog 8223
  • Blog 8239
  • Blog 8335
  • Blog 8424
  • Blog 8478
  • Blog 8501
  • Blog 8644
  • Blog 8751
  • Blog 8853
  • Blog 9074
  • Blog 9088
  • Blog 9095
  • Blog 9152
  • Blog 10389
  • Blog 10579
  • Blog 10681
  • Blog 10929
  • Blog 10956
  • Blog 11195
  • Blog 11737
  • Blog 11794
  • Blog 11853
  • Blog 12120
  • Blog 12435
  • Blog 12884
  • Blog 13129
  • Blog 13159
  • Blog 13200
  • Blog 13472
  • Blog 13567
  • Blog 13587
  • Blog 14207
  • Blog 14439
  • Blog 14625
  • Blog 14703
  • Blog 14909
  • Blog 14919
  • Blog 14975
  • Head Gasket for 3.1 liter stroker engine
  • Blog 15298
  • Blog 15393
  • Blog 15520
  • Blog 15602
  • Blog 15654
  • Blog 15717
  • Blog 15865
  • Blog 16224
  • Blog 16227
  • Blog 16485
  • Blog 16662
  • Blog 16809
  • Blog 16878
  • Blog 16923
  • Blog 17059
  • Blog 17103
  • Blog 17116
  • Blog 17333
  • Blog 17402
  • Blog 17506
  • Blog 18026
  • Blog 18084
  • Blog 18466
  • Blog 18819
  • Blog 19188
  • Blog 19475
  • Blog 19671
  • Blog 19685
  • Blog 20165
  • Blog 20200
  • Blog 20239
  • Blog 20330
  • Blog 20345
  • Blog 20475
  • Blog 20568
  • Blog 20611
  • Blog 20767
  • Blog 20885
  • Blog 21113
  • Blog 21316
  • Blog 21355
  • Blog 21400
  • Blog 21541
  • Blog 21630
  • Blog 21672
  • Blog 21712
  • Blog 21925
  • Blog 21950
  • Blog 22036
  • Blog 22272
  • Blog 22312
  • Blog 22331
  • Blog 23034
  • Blog 23042
  • Blog 23220
  • Blog 23246
  • Blog 23322
  • Blog 23406
  • Blog 23570
  • Blog 23700
  • Blog 23718
  • Blog 23737
  • Blog 23762
  • Blog 23794
  • Blog 23917
  • Blog 23956
  • Blog 23959
  • Blog 24064
  • Blog 24131
  • Blog 24139
  • Blog 24205
  • Blog 24221
  • Blog 24240
  • Blog 24430
  • Blog 24435
  • Blog 24495
  • Blog 24576
  • Blog 24643
  • Blog 24722
  • Blog 24770
  • Blog 24833
  • Blog 24848
  • Blog 24853
  • Blog 24872
  • Blog 25030
  • Blog 25248
  • Blog 25289
  • Blog 25373
  • Blog 25396
  • Blog 25527
  • Blog 25674
  • Blog 25853
  • Blog 25886
  • Blog 25922
  • Blog 25986
  • Blog 26129
  • Blog 26181
  • Blog 26217
  • Blog 26240
  • Blog 26247
  • Blog 26299
  • Blog 26401
  • Blog 26440
  • Blog 26559
  • Blog 26735
  • Blog 26736
  • Blog 26831
  • Blog 26844
  • Blog 26883
  • Blog 26884
  • Blog 27002
  • Blog 27028
  • Blog 27169
  • Blog 27260
  • Blog 27267
  • Blog 27307
  • Blog 27345
  • Blog 27400
  • Blog 27428
  • Blog 27452
  • Blog 27558
  • Blog 27622
  • Blog 27707
  • Blog 27735
  • Blog 27877
  • Blog 28049
  • Blog 28070
  • Blog 28199
  • Blog 28214
  • Blog 28234
  • Blog 28308
  • Blog 28320
  • Blog 28475
  • Blog 28476
  • Blog 28494
  • Blog 28657
  • Blog 28671
  • Blog 28814
  • Blog 28880
  • Blog 28923
  • Blog 28943
  • Blog 28945
  • Blog 28982
  • Blog 28993
  • Blog 29008
  • Blog 29036
  • Blog 29168
  • Blog 29412
  • Blog 29467
  • Blog 29618
  • Blog 29710
  • Blog 29759
  • Blog 29832
  • Blog 29868
  • Blog 29922
  • Blog 29950
  • Blog 30009
  • Blog 30027
  • Blog 30175
  • Blog 30182
  • Blog 30287
  • Blog 30302
  • Blog 30339
  • Blog 30443
  • Blog 30461
  • Blog 30474
  • Blog 30517
  • Blog 30556
  • Blog 30654
  • Blog 30729
  • Blog 30758
  • Blog 30773
  • Blog 30842
  • Blog 30872
  • Blog 30886
  • Blog 30989
  • Blog 31027
  • Blog 31048
  • Blog 31073
  • Blog 31109
  • Blog 31116
  • Blog 31138
  • Blog 31251
  • Blog 31307
  • Blog 31343
  • Blog 31378
  • Blog 31393
  • Blog 31432
  • Blog 31495
  • Blog 31507
  • Blog 31592
  • Blog 31626
  • Blog 31643
  • Blog 31692
  • Blog 31717
  • Blog 31760
  • Blog 31768
  • Blog 31777
  • Blog 31826
  • Blog 31851
  • Blog 31877
  • Blog 31907
  • Blog 31942
  • Blog 32009
  • Blog 32051
  • Blog 32073
  • Blog 32094
  • Blog 32111
  • Blog 32142
  • Blog 32169
  • Blog 32198
  • Blog 32250
  • Blog 32256
  • Blog 32259
  • Blog 32262
  • Blog 32291
  • Blog 32371
  • Blog 32417
  • Blog 32463
  • Blog 32515
  • Blog 32519
  • Blog 32562
  • Blog 32678
  • Blog 32695
  • Blog 32725
  • Blog 32981
  • Blog 33294
  • Blog 33517
  • Blog 33612
  • Blog 33734
  • Blog 33993
  • Blog 34018
  • Blog 34140
  • Blog 34452
  • Blog 34586
  • Blog 34855
  • Blog 35117
  • Blog 35378
  • Blog 35742
  • Blog 35956
  • Blog 36022
  • Blog 36030
  • Blog 36711
  • Blog 36997
  • Blog 37069
  • Blog 37070
  • Blog 37103
  • Blog 37166
  • Blog 37257
  • Blog 37645
  • Blog 37818
  • Blog 37954
  • Blog 38369
  • Blog 38569
  • Blog 38681
  • Blog 38923
  • Blog 38945
  • Blog 39122
  • Blog 39441
  • Blog 39494
  • Blog 39529
  • Blog 39575
  • PSL_240z's Blog
  • Phlebmaster's Blog
  • dhp123166's Blog
  • miguel240zcruz's Blog
  • dsalni's Blog
  • dsalni's Blog
  • beon's Blog

Calendars

  • Community Calendar

Categories

  • Configuration File Sharing
  • Drawing Files, Templates
  • Manuals, Diagrams, Guides
  • Software, Calculators
  • Other misc files

Product Groups

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. The story of how it all began, including pictures of ugly prototypes and crude early versions... What it all amounted to is a simple, strong bolt in swap that utilizes factory control arms and r200 mustache bar and allows the use of 2015 mustang brakes, hubs, cv axle ends and differential. The pinion yoke is a 1350 u joint one off a 1993 f250, it can be found at Denny's drivetrain. The struts that work with this setup are modified 2004 srt4 neon struts with their tops changed to the datsun 3 bolt camber plates. Most people simply contact bc racing and have them supply the 280z coilovers and exchange the bottom sleaves with the 2004 srt4 neons ones. Other people just use the coilovers they have and weld on the coilover tabs I also developed, so struts that work are basically anything you want. The brakes are either 13 inch rear brakes off a 2015 mustang or 11.8 inch brakes off a 2014 mustang. Both are dirt cheap, and both have a built in parking brake. I'm constantly updating the design with every batch, but here is what one of the components for a tacked cradle looks like. Pictured here is version 6, and the cradle bolted to the differential is version 4 I believe. *** Here's a picture of what it all ended up being in the end.
  2. Hey can anyone make those brackets for the rear end s13 swap into our 280zx also any other guidelines or tips on install would be great
  3. So I've been asked a lot of times about the different VQ engines, and swapping into an S30. While I'm not exactly an expert on them, I am swapping a VQ35HR into my S30. Most of the questions I get are about what is required to make a VQ run. I've read a lot about it, and I've seen what other people have done to make one work. Props always have to go out to 240Hoke (Austin) and EMWHYR0HEN (Myron) for pioneering this swap into an S30. I highly recommend you read their pages and threads. Doing a swap is a big deal; it's not just a single weekend bolt on change. Usually it requires a little welding, or a lot of $ to have someone else do it. You can about guarantee that you'll blow your budget, so when you're planning a swap. Expect to spend at least $3K-$5K more than you're thinking. A VQ35DE (287HP) is very tempting, stock it’s over 100 HP more powerful than the stock L28E (170HP). Before you buy: There are a lot of places to buy an engine. But before you look, there’s a lot more to a swap than just the engine. There’s all the accessories that often don’t come with the engine (people make more $ selling them separately). Then there are the Wiring harnesses, The Computers, the Fuel management, and the Integration to your car. These are things that are costly in addition to the expense of buying the engine. You should have a plan in place before you start. Expect your car to be out of service for quite some time. Try not to get bit by the “While I’m at it†bug. Do one project at a time, one phase at a time. Planning is probably the most important part of your swap. Read Read Read; make sure you’re familiar and comfortable with all the systems, and steps for swapping an engine. Which Engine? Most people are going for the older VQ35DE, as it’s the most widely available, thus cheaper, engine. Nissan put them in the Altimas, Pathfinders, Quests, Maximas, Muranos, Xterras, and Infinity G35's / FX35's / M35's among others - depending, of course, on the model. Eg. SE, SL etc. Now keep in mind there are variances between these models. Some have different intakes, some have different heads and different transmissions. I’m not going to detail that, since we’re only interested in the RWD versions. You can get a VQ35 from a FWD or AWD car and bolt a RWD Tranny to it, but you may need to change some additional parts out which could cost more, but the initial cost may be cheaper. Buying a 350Z VQ35 may be a lot more expensive than buying an old Altima VQ35 (power limited) or G35 VQ engine based solely on the fact that it came from a 350Z, so consider that. The VQ35HR: Nissan only made the VQ35HR for 2 years in the 350Z, 07-08, so it's a lot harder to find parts. But that being said, it's an excellent engine (306HP compared to the 287HP of the DE). The plenum is side ported so it fits better in the car. The block is taller, but the plenum is shorter so height-wise it still fits in a S30. The Tranny is better internally, but it still uses the same concentric clutch which really isn't that big a deal. Replacement clutches are a lot cheaper now than they were 2 years ago. The HR does require additional Trimming on the S30 Cross member, because the Oil Filter is in the front on the right. Aside from that it's all about the same installation wise. If you’re going to go HR, You might as well go VQ37HR, they're more common (made for more years), 40hp more (~330HP), and fit almost exactly the same since they're the same block as the VQ35HR. You can get a VQ37 out of almost any G37 or 370Z. They're still not as widely available as the VQ35DE is, but the VQ37HR is an awesome engine. Really if you had the $$$$ and could find one, the VR38DETT would be the ultimate, but that's a rare animal, (and way too much $$$$$) But I digress, so with the VQ35HR (and the VQ37HR) like the DE, you still need the ECU/ BCU, NATS, IPDM and Key. It's still drive by wire so you need a gas pedal from the same year car either 350z or G35. The HR uses a 3rd plug on the ECU, so there's a 3rd harness you'll need. The Engine harness, the Engine Bay Harness and the Dash harness (body#1) If you can get these all from the same car, you'd be way ahead. The Dash harness usually comes with the fuse box. The engine bay harness includes the IPDM or at least the plugs for it. The IPDM is a computerized "smart" power management box, but really it's just the relays for things like the headlights and such. If you want to use the gauges, you'll also need the AC Amp. It really is better to buy a whole wrecked donor car, so you can just move the whole systems over directly and not worry about getting the wrong harness. Harness Mods: I know there are companies like Zfever, that can do harness mods to eliminate the extra harnesses and the BCU/NATS security. For many these work out fine, but I really have no experience with them. So look at their site and decide for yourself if you want to go that direction. Myself, I am planning on moving multiple 350Z systems into my S30, so I’m sticking with the stock 350Z harnesses. I would love to get the 350Z Cruise control working. As I understand it, Cruise only requires the ECU/BCU and the speed sensors on the Differential. Going with Stock also means you shouldn’t have to do any tuning / dyno work unless you want to. Gas Pedal: Any VQ gas pedal should work, but one from the same year car G35 or 350z should work best. I only know of one change in the gas pedal, between 04 and 05 they changed the module that senses the pedal, but the plugs are the same so I assume it'll still work. It's best to stick with the same year as the engine - just to be sure it’ll work. Procuring an engine: You might look first at the junkyards, and then if nothing is available there, put an ad up on craigslist or whatever you prefer, and see if someone privately has a car. You may be able to buy a 07 SE or SL Altima or earlier Maxima, pretty cheap with the DE engine. (Though you'd have to find a RWD tranny) Quest minivans are also cheap. (Note that some of these are ECU limited in HP) But look around and see what's available locally. Then if you can't find one, the next is so search JDM engine sources. (Japan has a 35K miles law that basically it's too expensive to drive something with more than 35K miles, tax-wise, so there's tons of good JDM engines being shipped out) Another place to look is into insurance auctions, a lot of times you can buy a wrecked complete car for $2K-$3K though most require that you bring a dealer along. Donors: It’s best to buy a Whole Donor, so not only do you know that all the parts once worked together, it’ll be a lot easier and cheaper to have all the little modules and parts (engine accessories like Alt, PS Pump, AC pump etc) for your swap there on hand, and much cheaper than tracking them all down separately. Your neighbors may not like it, so plan on at least a car cover. Once your swap is complete, you can part the rest or sell it for scrap. A note on this: If you don’t buy a Donor, you can still get a lot of the same parts cheaper from lesser VQ equipped cars, than the higher dollar 350Z/G35 cars. Eg. The MAF’s are all the same part number across most Nissan models since 2003. Eg. It's $60 for a Quest MAF, and $98 for a 350Z MAF, same part #. That being said, I still bought a lot of my parts cheap on Ebay, and from Turbo-Toys, who dismantles mostly VQ cars. Mounting: Well McKinney Motorsports makes a Mount kit which is pretty good. But it’s very expensive. “Why the expense?†is a different conversation. But you can make your own from plans you can find on the internet. Or, you and make your own custom mounts as someone here on Hybridz did. One part that will be common to all VQ swaps in the S30, is the “Modding the Steering cross member.†You’ll need to cut away half or more of the cross member and bolster the front side to retain the stiffness for your suspension and Steering mounting. For the HR, you’ll also have to make a cut out for the oil filter. You’ll also need to cut out the S30 Stock Tranny mounts in the tunnel, and make/buy a new Tranny mount. You may also need to mod the shifter hole to fit. You will also need to build/buy a Shift linkage bracket (Ahoke’s is really nice!) to shorten the distance from the shifter to the Tranny. (This is one argument to switch to the Auto Tranny version as the Auto is shorter and Drive by wire – Though the width I’m uncertain about.) You will also need to route the S30 steering shaft around the exhaust. Usually this is done by adding another U-joint and extension, (Mine came from the donor 350Z steering) and building a bearing mount on the left fender wall. There’s a lot more to this, but this is basically what’s required. AC and Power Steering: Air Conditioning. Well the Stock VQ location for the AC pump won’t work due to the Steering shaft. So either you’ll have to do without, Build a different bracket, or go with electric AC. The S30 AC system can be made to work, but would require complete disassembly and cleanout, then reassembly and recharge using modern refrigerant from the 350Z. (I was looking at replacing the 350Z PS pump with the 350z AC pump and making different bracket. Again that is a different project). Power steering, yes it’s possible, but it’ requires integrating it with the “Adding Power Steering†topics here on Hybridz. It’s probably cheaper to go with that electric PS system. Exhaust: You’ll need to make/buy a custom exhaust as the stock headers point right at the S30 firewall when mounted. Turbo/Twin Turbo: kits are available, but run in the $4K-$6K range. GTM is a good company. Of course there would be further costs and mods required to put them an S30. I recommend that you get it working in stock form first. Transmission: The 350Z’s come with either an Auto or a 6 sp manual. Really either one is great, the Auto has a lot of features like manual shift or automatic. The VQ37 also has synchro rev-match (2010+) available, which is pretty fun, where the ECU detects you're shifting and matches the engine speed to your shift, so technically you can shift without the clutch. Watch out though, if you get the engine from a G37x the x is AWD, and the Tranny won't work in an S30 unless you go AWD with it too, which is really expensive. I think the Auto Tranny may have a control unit, but I haven't looked into that much since I’m going Manual. I know the engine harness is different for the Auto. You can use an Engine / harness from an Auto with a manual, but not vice versa. The auto tranny reverse lockout switch would need to be bypassed. You’d have to source a flywheel/clutch, remove the flex plate and buy a new pinion bearing / Flywheel bolts. The early 03 / 04 350z manual trannies had some synchro issues, so look out for those. All VQ35DE Manual RWD trannies are interchangeable from 03 through 06. The 07-08 years used a JK Tranny with a different bolt pattern, I haven’t verified that the 09 + VQ37 Tranny will work with a 07 or 08 HR engine, but it should because they both use the same block. It's best to use the 350Z Clutch master since it's matched to the concentric slave. Differentials: You can use the Stock S30 R200, and should be fine, though the 3.54 gearing may be a little tall for you. 3.7 or 3.9:1 might make you a little happier. The 350z uses a Short nosed R200, with the timing wheels on the stubs. The timing wheels can be used to tell the ECU to display how fast you’re going using the AC amp and the stock 350Z electronics. You’d have to use a Ron Tyler (RT) type mount to install a short nosed R200. This is the same for installing a short nosed R230 from a Z32. Both have the timing wheels. Your Stock S30 Speedo won’t work with a Z33/Z34 Tranny. A LSD is available in both the Z33/Z34 and the Z32 Diff’s. The Subi LSD R180 should still work with the VQ’s power, but your stub axles are the weak point. Fuel: Most swaps I've seen actually go through the work to upgrade the S30 fuel lines. I'm not certain that's required since the 350Z fuel lines appear to be the same size. The VQ needs to be run either on a "dead head" configuration or on a return configuration. Either way, you'll need a good quality Fuel pressure regulator, and a stronger Fuel pump. I've seen people swap in the Stock 350Z pumps, and I've seen people use walbrough 255 LPH pumps. Both are workable. You'll need to research the different setups and decide what will work for you. My plan is to use a quart sized pressure container in the engine compartment with the input and the output to the engine on the bottom then a FPR and a return to the tank on the top. That way any bubbles float up through the FPR and my engine has constant pressure from before the FPR. Likely I'll use the S30 tank and an external walbrough. The 08+ cars are nice too, in that most use the key fob deal that with Bluetooth, allows for push button operation, so you wouldn't have to even take your keys out of your pocket. But that's another story. Now I realize this is really not much more than a primer, but it answers most of the questions I am regularly asked. I welcome constructive comments. Good luck on your projects. I would highly recommend for you to download the FSM's for the VQ35DE, VQ35HR, and the VQ37HR cars so you can see exactly what these components do, and what each system consists of. Being familiar with that will make sure you pull all the parts you want the FIRST TIME. Here are the FSM links: http://www.xenonz33.com/reference.html http://www.xenonz34.com/reference.html PharaohABQ.
  4. I have a wrecked 2003 G35 that ran and drove fine with an auto trans. I'd like to put the engine and trans in my 1982 280zx. I have the engine figured out but I'm having trouble finding info on how to make the RE5R05A electronics work or even if I can make the stock G35 parts work. BEFORE YOU TELL ME TO Cd009 swap it, I want an auto because my knees have issues, I can't clutch like I used to. I still have the doner G35 for now. Thank you for any help!!!
  5. Hey guys, been a loooong time since I was last on here. I am getting back into my engine swap project for my 77 280z. I sold the engine out of the z this year and picked up pieces for the swap. I am shooting for the following setup 302 EFI, W/C T5, unsure about rear differential I have a W/C T5 already but it has no bellhousing, supposedly low miles I have an 86 mustang GT 302 but I just obtained a free, running and driving 2001 Mercury Mountaineer with a 302 that I am told is the best factory 302 I can get, so I will likely be using that for the donor I do not have a rear differential for the swap, that seems to be the only other BIG item that I am missing. I have the solidwork prints from the Laine swap website and will likely be using those to fabricate my mounts. I will be updating with pictures soon. Is there anything else I will need for the swap that I cannot pull from the Mountaineer? I was hoping I could use it's ECU and electrical system in the Z. I would like to be producing over 200hp/325ft/lbs at the wheels with this setup. I was told that the cam in a mountaineer 302 is actually a truck cam and I could gain a decent HP boost (at the cost of a little torque) by swapping the cam out of my mustang GT 302. Does anyone have any experience with this?
  6. Hello! I did an rb25det swap for a 1979 280zx, though I'm having issues figuring out the wiring for the alternator; with the original alt' wires disconnected, you can't shut the fuel pump off/dash lights stay on until you disconnect the battery, I've tried splicing the L wires into the Rb's harness but it still has the same issue. Anyone who's done an engine swap found the solution to this?
  7. Hello! Looking for an N42, P90 or running l28et around Washington State. For an engine of same value; I have nearly a full LM7/CD009 swap, has a tune just starts and dies, r180/r200 1310 adapters (including new driveshaft and dirty Dingo engine mounts), decided to go back to the L28 instead (or another one of the other engines listed), more info if requested.
  8. This is my first post here so I hope I won't get flamed, but I have really been thinking about the possibility of swapping a ford ecoboost motor into a first gen. I daily a focus st, and the car is just a riot so the thought of putting a similar engine in a lighter rwd car is really appealing. The engine itself mates perfectly to a trans from a Miata, and ford sells a control pack (all of which can be had for around $2500) it also bumps power to a claimed 280hp/360tq at the crank on 91. I'm aware of the need to fab a bunch of crap, and run new fuel lines and such. To me it sounds like a pretty badass project, I'm open to any and all opinions. Thanks.
  9. Hello fellow Z drivers! I have a 1981 280zx n/a and recently purchased a turbo parts car for it (1982). My plan is to begin the swap soon but I wanted to make sure all my ducks are in a line here, as it seems like everywhere I look I get different answers, SO: To do this properly I am under the assumption I need: •the turbo motor •turbo harness and ECU •the power rack and pinion (for clearance) •the turbo subframe (whole sub frame or just the cross member?) •the turbo fuel pump (I was told they're higher output and that this is mandatory, again would love input here) •the steering column and/or the proper spacer (apparently the R/P will bind up the u-joint if I don't swap the column?) •the front struts (assuming that the entire subframe must be swapped, AND assuming that they are in fact entirely different struts, which Ive yet to confirm) Am I missing anything? Are my facts horribly wrong? I'd like this swap to go as smooth as possible so any and all info in this matter will be helpful!
  10. I have got myself a 240z with a 350 stroked to 383 swapped in it and I am beginning to realize I might be in over my head. It's got a 4l60e and a stock rear end. How do I go about finding a rear end upgrade that will fit my swap and hold 450 hp?
  11. I recently acquired a late model FS5W71B 5-speed that supposedly came out of a 280ZX. It definitely has the right bellhousing bolt pattern, the single ear exhaust hanger, the reverse check plate, and the tall ears for the shifter. I've put it in 5th and counted input shaft to output shaft ratios, and confirmed it's the .745:1 5th gear. Based on the research I've done on this site and others it sounds like it should bolt in just fine, but I need to make sure I use the pressure plate and throw-out bearing out of either one or the other and not "mix and match". I have a completely new clutch/PP/TOB (Exedy) that I had bought for my 4 speed, and am guessing that it should be OK in the 5 speed? Can anyone confirm this? Also, the breather has broken off flush with the case. Any advice on removing the stub? The 5-speed came with a slave cylinder, should I use that one or my 4-speed's, or is there no difference? Looking at this web link http://www.atlanticz.ca/zclub/techtips/shifterbushing/index.html I do have the weird oblong shifter (bottom picture, right side) from the 5 speed. Does anyone have any idea what that internal spring is supposed to do in relation to the bushings? Is it one of those push-down to engage reverse features? Finally, this transmission only has one electronic sensor installed, up near the front (Reverse switch I believe), and nothing else. There looks like maybe something should be in the rear, and possibly got broken off. I need to do more cleanup in that area to be sure. I downloaded a copy of the '83 FSM from Xenon and the MT chapter shows 4 sensors! (Reverse switch, Top Gear Switch, O.D. Gear Switch, and Neutral switch.) In all the pictures of these transmissions I have found on line I have never seen 4 switches installed on the side of these transmissions. Does anyone know what the deal is on what reality appears to be VS what the FSM is calling out? In my picture the 5-speed is on the left, the 4-speed is on the right, The shifter with all the tape around it is the oblong one out of the 5-speed. The boss that is up from the tailshaft on the right of the center casting part line (red arrow pointing to it) is full of crud and I suspect where the neutral switch should be installed. Is there ANYTHING that anyone can advise me on in regards to making this swap successful? Pitfalls? "Gotchyas"? "As long as you are doing this you may want to..."? Thanks!
  12. Hello, Been looking for years and I finally came into possession of a motor-less 260z that i want to swap a non-turbo 2jz into. I've swapped an engine before but it was the same type of motor (blown 3s-gte swapped for one I built-up in my 91 mr2). So I'm trying to compile a to-do/to-find list for what I need for the swap, so far this is what I have and want to use: Have: -A buddy sold me a rear-sump sc300 2jzge and I was able to get a AR5 transmission for cheap as well Planned: -ApexEngineered front crossmember and JZ mounts -1jz bellhousing (for the ar5) -SN95 Mustang gas tank + fuel pump -JDM 2jz ecu for now (haltech or megasquirt later) -Better wiring harness later in life -JZ clutch fan -3 core radiator Unknown: -Will the 260z master cylinder need to be used? Or would I need another manufacture? -Do I need to run new fuel lines from the tank? I know I'm missing some things and was hoping that someone with more experience can shed some light as to what else I need.
  13. If there end up being aftermarket gear sets let me know (and maybe I can save myself some effort) This build is still in the planning stages. So I am asking now before I pull two transmissions apart. Are there any differences in shaft diameter between the gear boxes, (or other differences for that matter) which would prevent me from swapping the 1st through 3rd from a F4W71B 4-speed to a later model 5-speed? (In short, are the gears compatible?) If there is already a post on this I apologize. I could not find anything searching, and the search function kept breaking itself.
  14. Hey everyone! I don't know if you know me but my name is Mike Garcia and I am owner/builder of the Overkill Z. Years ago when I was building my car while searching for an engine mount for my S30 I came across John Coffey here on HybridZ. After looking at the other options I instantly felt his was the best designed and strongest option. I bought one and used it in my build. We became friends but missed the opportunity to buy the cross member JIG before his passing. However fait has a funny way of working.... I recently moved to Southern California when I saw the Jig was up for sale down in San Diego. I made the 4 hour round trip the next day and bought the Jig with the sole purpose of making the cross members for the community. I am one guy with a Jig and the resources to REPRODUCE these cross members Just as John designed! These will be MADE TO ORDER and will be low production numbers to insure a QUALITY product. So Just as I came across John you have now come across me. They will come as raw metal for ease of welding with the original instructions. YES these can be bolted in by drilling holes through the rails and cross member. Price $350 a unit plus shipping to your door step. Happy building! These are made for OEM 2jzgte engine mounts. People have used These for 1jzgte,vvti,GE swaps but may of had to swap out mounts. The 4bolt pattern is the same however the mount brackets vary. Message me for orders. Instagram----- Mike321go Facebook----- Mike Garcia
  15. I finished my l28et swap and she runs beautifully! The only thing I don't have is the tachometer wired up. Anyone know where the tachometer wire is located? Preferably someone that has done it already. Here's some picture if it helps at all.
  16. I know there are lots of these threads, but most are pretty old. Maybe someone might be interested. I have a 78 280Z, I found a 82 ZXT on craigslist and bought it. My goal here is to make a drivable stock looking 280Z with some a$$ I have no illusions of out running a modern Camaro or Mustang, but I'd like to make them earn it. so here we go As bought almost two years ago.
  17. Hello everyone, i had a question regarding the sr20det swap into the s30 chassis more specifically a 280z. What needs to be done so that the egnine can get enough fuel for about 250-300 crank horsepower reiably? Getting a fuel cell isnt really an option since i plan to daily this car in the future. I was just curious what everyone else was using in terms of fueling in their ka/sr swaps.
  18. Link g4+ monsoon stand alone ECU,Panic Wire harness,10lb flywheel, 264 cam shafts, Head ported (intake side only), Adjustable cam gears, Eclutchmasters 6 puck unsprung clutch and pressure plate (stage 4)Drift Motion turbo kit Billet 6262 turbo (Garrett internals), manifold, wastegate tial replica, and 3" downpipe, Hks bov replica, Aeromotive fuel pressure regulator, 440cc injectors,Bosch 044 fuel pump, Arp head studs, Aem wideband Short throw shifter, a/c and p/s delete (shortened serpentine belt and new ribbed pulley on tensioner),vvti coils wasted spark setup, CX racing intercooler ,
  19. Its time for some changes in my Z due to a knock in the bottom end. I have made the decisions to go the LS route with a manual trans. and i am doing research and getting all my ducks in a row start spending money. I have see sights were people are putting a 350Z/370Z CD009 trans behind there LS. I did some digging and found that a adapter plat is made by Collins performance technologies . The 350z has a great shifting trans and is much cheaper then a T56 and can take abuse, but I have never seen this combo in a S30 if you have even seen this please let me know of if you can think of any pluses or minuses to this idea chime in please! Thanks Will S. cd009 with adapter CD009 CD009 CD009 T56
  20. I just picked up this badboy about 2 weeks ago. Runs strong and shifts smooth. Has a Corvette LT1 engine with matching 4-speed auto, engine has intake, larger throttle body, competition cams, headers, power steering. Suspension is okay, seems to have been refreshed at somepoint but I'm thinking of going the coilover route and some aftermarket control arms to push back the rear wheel a little. Also looking to change out the wheels at some point but one of the biggest disappointments is the stock R180 with Open diff. Whats the cheapest way to get an LSD in here, i think its a 3.54 and seems to work pretty well for all around driving running about 2500 RPM at 80 mph but i'm not opposed to a 3.7. I'm considering welding the 180 to keep it intact while i figure out a r200 LSD swap. Any advice is appreciated.
  21. Hey guys. So Ive previously done a L28et swap previously back in the day and car ran fine. Just did another 81 L28et swap into my series one 240z and got it all bolted up and cranking. Now, on the donor car the car started up and ran up and down the block before I took it apart( 2 years ago) so things seemed all functional at least back in the day. Issue I'm running into is the car won't come on. And when it does start briefly, it dies within 3 seconds. I Bought a new fpr and verified that there is fuel and pressure (36psi) while car is off and in the ON position. There is verified spark in all 6 sparkplug wires. I've got two separate grounds on the engine so engine and car is well grounded. I also took the fuel rail off and verified that while cranking the Injectors are indeed spraying and there isn't infection leaks. Below is a YouTube video link I uploaded for your viewing pleasure haha. The ECU light seems to come on then shut off after cranking and sometimes intermittently the Injectors will stay on buzzing even if I stopped cranking. Anyway, any idea what's going on? https://youtu.be/p-DhNG0mq7E Your help is Much appreciated!
  22. Picked up this non-running '73 240Z in Wisconsin, it came with an R200 (which I had planned to use, but am now going Ford IRS 8.8) and a mess of other stock parts. It looked to be perfect for what I was building and after media blast it's quite solid other than floorboards so here we go. Parts already here -LS3 TR6060 dropout from a 2010 Camaro w/ 30k miles (lookup Midway Mustang Dewitt IA) -CXRacing LS swap kit w/ headers and y pipe -CXRacing Front LCAs and TC rods -CXRacing adjustable coilovers -T3 Rear LCAs -Silvermine billet front 5 lug hubs -Silvermine front wilwood brake kit -Zedd FIndings Floorboards Parts to order -T3 rear backing plates -T3 rear strut tubes -Ford Explorer 8.8 Diff -Z32 rear 5 lug hubs and brakes -Wheels/Tires, S71B ~17x11 (5.5 backspace) and 17x9.5 (4.9 backspace). 315/35R17, 275/40R17 -Flares (TBD, maybe SSWorxs???) My rear end will largely be based on Sunny Z's build. Digging through the wheel forums it looks like 5.5" backspace on the rear is doable, any advice here on whether 5.5 is too much? The T3 plates should put the wheel in the stock location.
  23. Having pulled my spindle pins three times in the past few years and somehow managing to save them. On my last attempt I finials messed up the threads to the point were replacement was going to be a must. Having done some digging around I decided to go the 5/8 bolt route There are many people who say do not do this but if you look at the techno tuning toys rear lower control arms. Granted they are using a hime joint they use a 5/8 bolt. On these grounds I set off to find the right bolt for the job and this is what I came up with. From Fastenal a 5/8-11 x11 yz8 haven taken many measurements and driving the people at Fastenal crazy we decided that this was the best bolt for the job at hand. I hope this helps for anyone considering doing this swap and any info on pros or cons would be appreciated. And here are a few photos of the bolt I will be using. And they cost only $12.90 each . Fastenal part #15335
  24. Hey all, I’m a Datsun newbie! Always wanted a 240z/510 project and finally made it happen over the weekend. I picked up the 73 Datsun 250 miles away from home with the “guaranteed to make the drive” from the owner – which it did not but we’ll get to that later. 1973 Datsun with a SBF 306 engine with GT40p heads, single plane intake, 750 Holley HP carb, speedway headers, 3” exhaust, manual valve-body c-4 transmission with SFI bell housing and 9” stall converter, TCI shifter, R200 posi rear end, Meziere water pump. I realize the 750 carb is probably too big, I think its what the PO had around and tuned it work. Motor seems to run strong, starts up pretty easily from a cold start and sounds like a beast. I however am a complete V8 newbie. Here are some pics of the car/engine. I ended up having to tow the car after 40 miles of driving as smoke started to fill the cab, when I pulled over it seemed like transmission fluid was dripping onto the exhaust. Upon examination we found the speedometer (speedometer and tach not hooked up) cable opening was closed with a rubber bushing and a wingnut. I tightened up the wingnut and have taken it for some short trips and it has not leaked yet. So that seems to have fixed the problem. I am not a huge auto guy and would prefer a 5-speed. I don’t even know where to start with wrapping my head around what that would entail. I have 2 large questions at the moment. The first is the transmission which has no transmission cooler – and it not hooked up to the radiator for cooling – is this a problem? The second is the flywheel – it looks like casing was trimmed back for some reason and the flywheel is exposed – is this a problem? Thanks for any help.
  25. Hi guys well i just sold my 06 350z and ive decided that im just going to start an rb25 swap on my old 73 240z soon. But before that i would like to see whats out here to see if you guys may have laying around. Im looking for performance parts, maybe someone has the mounts laying around they never got to use.? If not im going with the Mckinney mounts. Anything rb25 related is usefull. Let me know if anyone has anything. 240z parts i can also consider. Thanks.
×
×
  • Create New...