Jump to content
HybridZ

RB20DET into my 240Z


70 Cam Guy

Recommended Posts

Here's more of the test fitting:

 

I'm afraid I don't have clear shots of the mounts themselves. All I really know is they are earlier Volvo mounts. I actually bought hockey pucks if these didn't work. All we had to do was slot the mount brackets to make it work.

 

5795339507_55a5969a17_b.jpg

 

5795339577_c1f063d16d_b.jpg

 

5795339613_236ec3b75f_b.jpg

 

5795899266_ac9e8e0ce9_b.jpg

 

5795899204_f3415ae775_b.jpg

Link to comment
Share on other sites

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

We are going for a partial wire tuck. All the wires are routed under the intake manifold and the idle control is also underneath. There was room for the ignitor on the back of the head.

 

5795339825_951895a18f_b.jpg

 

5795899470_3eb28c206d_b.jpg

 

Starting to run the intercooler piping

 

5795899496_dff823f052_b.jpg

 

5795899660_a2b085ed91_b.jpg

Link to comment
Share on other sites

I have to apologize for the iphone pics in this one. This is very close to the current state. Still mocking the intake piping here

 

5795899532_aaeea2c6de_b.jpg

 

5795339935_90681e6f7d_b.jpg

 

And the stunning radiator from PRC Racing arrived. I started with their 24x19 GM double pass but asked them to cut it down to 17" height and angle the upper neck. For $40 they will cut down their cores and cap the top or bottom of your choosing. Since my water neck was one piece, that was no extra charge. Those guys are awesome!

 

5795899594_8bfbec881b_b.jpg

 

5795339999_332fca426d_b.jpg

 

We are doing the exhaust so I can unbolt the back half of the exhaust at the diff to run the muffler/tip I have been running, or bolt on a straight pipe :D

 

I should have more pics in the next couple days. Juggling this project with my Toyota truck axle swap and a house search. My last couple months have been crazy!

Link to comment
Share on other sites

Hey Andy,

 

Great looking project. I am working on a very similar rb25/s30 project. Very soon I will need to plumb the wiring through the firewall. I would like to use the same setup as yours having the ECU near the glove box. Can you post a pic of where you went through the fire wall with your RB wiring harness?

 

Thanks

 

Bill

Link to comment
Share on other sites

Wow this project is moving fast!

 

I can't lie, I held off on making the thread til work on the swap started. Part of it has been a severe lack of free time juggling everything. I started the motor work back in January and progress has been Saturdays and after my day job. The swap itself has gone quickly since the mounts worked out in my favor and everything lined up.

 

I'm getting anxious and have been watching/listening to youtube videos of RB's and dreaming :lol:

Link to comment
Share on other sites

Look good man.

 

Your going to like the rb20. I really liked mine. They rev to the moon and make great power.

 

Thanks Pat! Your threads were a great help when I was deciding to do this and when ordering parts.

 

I can't wait to drive the rev happy baby brother of the 25 :)

Link to comment
Share on other sites

Hey Andy,

 

Great looking project. I am working on a very similar rb25/s30 project. Very soon I will need to plumb the wiring through the firewall. I would like to use the same setup as yours having the ECU near the glove box. Can you post a pic of where you went through the fire wall with your RB wiring harness?

 

Thanks

 

Bill

 

Thanks! I think it's down below the battery but I haven't actually looked too close yet. You can kinda see it in a pic I took tonight but I'll remember to take a closer look next time I'm at the shop

 

5817380020_2fde4985ec_b.jpg

Link to comment
Share on other sites

Today I asked about the motor mounts again. They discovered them on accident one day when a customer car was in the shop.

 

Joey said they are early Volvo 6 cylinder mounts, still unsure of model but I don't know how many 6 cylinders Volvo made. He told me one our friends said they don't last long in (dirt) rally but for street they should be fine. They are made for a heavy old 6 cylinder so we figured they should work with the RB.

 

It's not totally perfect but I think it will be ok.

 

5817378230_c8bee8980d_b.jpg

Link to comment
Share on other sites

They are pushing hard to finish up the loose ends. This is the kind of project I would love to do myself but just don't have the space to devote to the swap. Right now the project in the driveway is my Toyota truck project (solid axle swap and suspension).

 

The oil pan was more work than we expected. I started it by cutting the flange off and cleaning up the edges. I ordered a small block chevy pan from Summit to try cannibalizing into my RB pan. It was almost the same width but fitting it together was still a lot of work. Joey did the work on the pan after I cut the stock one.

 

5816812921_3e8aaea189_b.jpg

 

Here's the pan with exhaust. It's braced against the transmission like the SR's

 

5816813075_c0c4d339cd_b.jpg

 

5816813257_fcd220afe2_b.jpg

 

5816813415_9653df6ee9_b.jpg

 

We definitely have much respect for Pat after doing this ourselves.

Link to comment
Share on other sites

Last update for today. Odds and ends....

 

The latest engine bay shot. The intercooler had to move in closer to the core support so the hood would closer lol :huh:

 

The bottle on the fender is the coolant bottle from Jegs

 

5816812709_95b16ae8a8_b.jpg

 

Just a gratuitous shot of the mount, exhaust, and coilovers..

 

5817379318_9938acbfea_b.jpg

 

The mock up of the air filter.

 

5816813883_be044e00cb_b.jpg

 

5817379744_76b8714944_b.jpg

 

This will eventually be my catch can. It started life as an MSR brand white gas bottle.

 

5817379876_d39016d1ba_b.jpg

Link to comment
Share on other sites

And just to hijack my own thread for a post, here's my truck in process. It's one of the reasons why the Z is at the shop. It's a stark contrast from my corner carver that will soon have more power :)

 

5795915210_4a585bdcb0_b.jpg

 

And people, it's true, 2 projects at once is insanity to tackle.

Link to comment
Share on other sites

man thats some good progress. tackling two projects at the same time is exhausting for time and money haha. it will all be worth it when u turn the key and go for your first drive! from the pics earlier i remembered where i have seen your car before. were you at the shadow cliffs meet last year? i dont remember seeing the car at the lake this year however, probably already under the knife? haha

 

i have seen very few fixed up Zs in our area around WC, probably hiding from the bad weather lately lol

Link to comment
Share on other sites

5816813415_9653df6ee9_b.jpg

 

We definitely have much respect for Pat after doing this ourselves.

 

 

 

 

Thanks Andy

 

Those motor mount look like Jaguar XJ6 motor mounts 1972-87 I believe. I used them for my rb20 swap. Fit like a glove. I bought another set for my 1jzgte swap but never used them. Now the real question where are they lol

Link to comment
Share on other sites

man thats some good progress. tackling two projects at the same time is exhausting for time and money haha. it will all be worth it when u turn the key and go for your first drive! from the pics earlier i remembered where i have seen your car before. were you at the shadow cliffs meet last year? i dont remember seeing the car at the lake this year however, probably already under the knife? haha

 

i have seen very few fixed up Zs in our area around WC, probably hiding from the bad weather lately lol

 

Wow you have a good memory! The car looked a little different then too. Were you one of the other Z guys? I remember a silver one with 350Z wheels and his friend, and then a green one I think. And you're right lol, the car was without engine and that weekend I was under my truck with the torch :lol:

 

Pleasantongroup1400.jpg

 

Here we were parked at JCCS last year. The silver Z is another local friend. He's got the full T3 suspension on his Z. He got t-boned on the front fender so he's been saving and massing parts to get it back on the road again.

 

5029139812_fd99a42ae9_b.jpg

 

More to come this weekend. I need to get the photos off the camera again.

Link to comment
Share on other sites

More updates, in this post, another picture of the Volvo mount:

 

5827297757_53b3406dc7_b.jpg

 

More detail shots of the wire harness. I can't see where the actual hole is, it's pretty well hidden.

 

5827295771_fbb39f909d_b.jpg

 

Here's where the ignitor went:

 

5817380020_2fde4985ec_b.jpg

 

Intercooler piping finalized, I am really happy how it came out:

 

5827295127_9920370877_b.jpg

 

5827295999_595c46df3b_b.jpg

 

5827847184_1d22aa75dc_b.jpg

Link to comment
Share on other sites

We ended up using the RB25 compressor elbow and the RB20 compressor elbow to make one that will work for the setup:

 

5827296231_7e50ea3013_b.jpg

 

5827846252_d6bd71b710_b.jpg

 

A heat shield is planned for the MAF.

 

The radiator is in. I ordered the PRC double pass everyone orders but had them cut the height down to 17" and angle the upper neck. The modification cost was $40. The radiator looks top notch.

 

5827845096_ec5355f7dd_b.jpg

 

A shot of the HKS blow off valve. We turned it around so it wouldn't fill with water

 

5827295443_85747b9811_b.jpg

 

The coolant bottle was one from Jeg's, I like the location of it. Almost out of sight

 

5827295633_9c7cd8d848_b.jpg

 

monster Bosch 044 fuel pump

 

5827847324_964204f454_b.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...