Challenger Posted September 4, 2011 Share Posted September 4, 2011 (edited) Looking for a DB37 meqasquirt harness. I really just need the pin connection itself since I have already built my harness but Ill take what I can get. (Let me know if you know where I can buy just the connector) (harness side obviously not the MS unit side) I need an external wastegate. 38mm. Not looking for anything extravagant. Will be used on a holset on my L28et at fairly low pressures. Need a BOV, again dont need anything super fancy. If youve been using it successfully without problems it will work for me. Preferably one with a flange. Let me know. Thanks Edited September 4, 2011 by Challenger Quote Link to comment Share on other sites More sharing options...
borini63 Posted September 6, 2011 Share Posted September 6, 2011 I have this BOV brand new never installed if you still looking.Am not sure what brand.$25shipped. Quote Link to comment Share on other sites More sharing options...
Challenger Posted September 6, 2011 Author Share Posted September 6, 2011 Where/who did you buy it from? Are there any markings on it? Quote Link to comment Share on other sites More sharing options...
aplyedmind Posted September 6, 2011 Share Posted September 6, 2011 I have this BOV brand new never installed if you still looking.Am not sure what brand.$25shipped. Looks just like the one msa sells for $85 ... that's a good deal. Quote Link to comment Share on other sites More sharing options...
Challenger Posted September 12, 2011 Author Share Posted September 12, 2011 Got the BOV, thanks! Still looking for a wastegate! Let me know what you have? Quote Link to comment Share on other sites More sharing options...
Challenger Posted September 15, 2011 Author Share Posted September 15, 2011 (edited) Got a wastegate. Still looking for megasquirt parts! Anyone know where to buy just the connector for the harness? Edited September 15, 2011 by Challenger Quote Link to comment Share on other sites More sharing options...
mario_82_ZXT Posted September 16, 2011 Share Posted September 16, 2011 DIYautotune should have it. If you give me a couple days I might be able to find a spare one around here... Quote Link to comment Share on other sites More sharing options...
Challenger Posted September 18, 2011 Author Share Posted September 18, 2011 Yeah I looked on diy. All I could find was the 18 inch harness with connector for $50... I bought a db37 connector off the Internet but all of the solder joints were for very small wires so that didn't work. Thanks, no rush. I have plenty of other things to finish. Haha Quote Link to comment Share on other sites More sharing options...
AIShelby Posted September 21, 2011 Share Posted September 21, 2011 Yeah I looked on diy. All I could find was the 18 inch harness with connector for $50... I bought a db37 connector off the Internet but all of the solder joints were for very small wires so that didn't work. Thanks, no rush. I have plenty of other things to finish. Haha Quote Link to comment Share on other sites More sharing options...
mario_82_ZXT Posted September 22, 2011 Share Posted September 22, 2011 I found one but it's got very small wire solder things as well (came with an MS kit from DIY). What size wire are you trying to run? I think 18ga, maybe even 20 is acceptable for everything except the injectors and the grounds. Quote Link to comment Share on other sites More sharing options...
Challenger Posted September 24, 2011 Author Share Posted September 24, 2011 Yeah, everything is atleast 18 gauge or bigger. Im basically using all of the original wires, injectors and ground wires are the original 14 or 16 gauge wires. What sizes does it look like it will accomodate? Quote Link to comment Share on other sites More sharing options...
Challenger Posted October 9, 2011 Author Share Posted October 9, 2011 Got everything I need. DIYautotune was able to sell me just the pin type connection! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.