jhowell34 Posted April 16, 2012 Share Posted April 16, 2012 anyone have pics of the ka24de motor mounts and trans mounts? Quote Link to comment Share on other sites More sharing options...
tfreer85 Posted April 23, 2012 Share Posted April 23, 2012 http://mckinneymotorsports.com/prod_240-260-280Z+KA24DE+swap Also a little searching and you can see some custom made one by guys here.... Good luck, Quote Link to comment Share on other sites More sharing options...
logr Posted April 24, 2012 Share Posted April 24, 2012 I don't have pics handy but I made a cradle that sets on both frame rails. I used the L28 motor mounts but would use the SR ones if I do it again. The mounts should be pretty much the same for both the KA and SR since they bolt into an SX. For the trany mount I cut the stock support on both sides of the rubber mount and welded a plate in on each side to move the rubber to the correct location. It is a pretty straight forward easily done swap as swaps go. Quote Link to comment Share on other sites More sharing options...
joa_taste Posted April 25, 2012 Share Posted April 25, 2012 I have some unused mckinney sr mounts in my garage im getting rid of if you want 350 plus how ever much shipping is Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.