CableSrv Posted September 10, 2015 Share Posted September 10, 2015 DARN IT!! Quote Link to comment Share on other sites More sharing options...
Yoak Posted September 12, 2015 Share Posted September 12, 2015 PM sent, I am in on the next round Quote Link to comment Share on other sites More sharing options...
ihiryu Posted September 16, 2015 Author Share Posted September 16, 2015 All orders are in! Another two orders rolled in. Still going strong fellas! Quote Link to comment Share on other sites More sharing options...
jpndave Posted September 16, 2015 Share Posted September 16, 2015 (edited) Can this still be added to, I am interested in two sets of gauges. Thank! Edited September 16, 2015 by jpndave Quote Link to comment Share on other sites More sharing options...
ihiryu Posted September 16, 2015 Author Share Posted September 16, 2015 Shoot me a message with the part number of your gauges, and I'll gladly send you over a quote! Quote Link to comment Share on other sites More sharing options...
ihiryu Posted October 1, 2015 Author Share Posted October 1, 2015 Those who ordered gauges from me a few weeks ago should have gotten tracking numbers from me today. The last person who placed an order hasn't shipped yet. Also two of the three orders were from TX, so I might have accidentally swapped your tracking numbers. Quote Link to comment Share on other sites More sharing options...
CableSrv Posted October 5, 2015 Share Posted October 5, 2015 WOOOOT! got my gauges and they are gorgeous! Quote Link to comment Share on other sites More sharing options...
ihiryu Posted October 7, 2015 Author Share Posted October 7, 2015 Pics or ban! Quote Link to comment Share on other sites More sharing options...
Orangetang Posted November 4, 2015 Share Posted November 4, 2015 Yeah guys, where are all the pics? I'd like to see some 4 1/2" and 2 5/8" installations before placing an order. Especially at a MINUS 34% CAD discount. How are the fuel gauges working for everyone? Do they self program and work well with the Nissan sender? Quote Link to comment Share on other sites More sharing options...
TeemuM Posted November 4, 2015 Share Posted November 4, 2015 Heres my 4" revolution series. Quote Link to comment Share on other sites More sharing options...
Orangetang Posted November 6, 2015 Share Posted November 6, 2015 Looking good, what is in the 3 gauge cluster? Quote Link to comment Share on other sites More sharing options...
TeemuM Posted November 8, 2015 Share Posted November 8, 2015 AFR, original fuel/amp and clock. Going to replace that fuel/amp at some point. Maybe with oil temp. Also speedhut afr gauge would look better than innovate that I currently have so maybe that too. Quote Link to comment Share on other sites More sharing options...
Orangetang Posted November 9, 2015 Share Posted November 9, 2015 I've been playing with graphics today for a gauge order. For AFR, I have an innovate DLG-1 with a dual AFR display (for each header bank) in the clock location right now, the rest remain stock. Of the 5 aux gauges, I'm OK with abandoning the volts and clock, leaving a Fuel, Oil Press and Coolant Temp, in the tri-cluster. That said I'm on the fence about the dual fuel/speedometer option, letting me gain something like oil temp. I'll probably mount the AFR gauge under dash, pillar or mid console by the receiver. Probably going with white on black with either white or red illumination and white needle, red illumination. Dave doesn't really have a decent logo on his website that I can find, so I made up a modern looking Rebello Racing logo I kind of want to have on the Tach, since it's the soul of the car. The other designs are just stock emblems from my car. The Datsun and 240Z emblem. Any thoughts? There is a sexy as f*** Austin Healey set I found on google, but can't find the image now. Illuminated emblem looked really good. Quote Link to comment Share on other sites More sharing options...
88dangerdan Posted November 9, 2015 Share Posted November 9, 2015 They all look good. Could you design the set where Rebello and 240z line up horizontally across the 2 gauges when installed. I think that would compliment both if that is what you're after. Quote Link to comment Share on other sites More sharing options...
Orangetang Posted November 10, 2015 Share Posted November 10, 2015 Easy to do, hard to decide to do. Quote Link to comment Share on other sites More sharing options...
ihiryu Posted November 12, 2015 Author Share Posted November 12, 2015 Just had an email order go in! We're still alive and kicking! I'll offer an additional discount to someone who orders a 4.5 and posts up an install photo! Quote Link to comment Share on other sites More sharing options...
helghast7 Posted November 17, 2015 Share Posted November 17, 2015 Ok I hope I did this right. Its a huge pain in the ass to post pictures on this site. This is the install of my 4.5 tach and my 2 side gauges. They all are mounted in the old factory gauge bezels. I'm not really happy with how I mounted the tach, but I'll redo it this winter. Quote Link to comment Share on other sites More sharing options...
ihiryu Posted November 17, 2015 Author Share Posted November 17, 2015 Did you not try to just drop them into the hole?? Another person told me via email that he was able to just drop them into the hole with the factory gauge removed. You pretty mounted yours the same way I did mine. Quote Link to comment Share on other sites More sharing options...
helghast7 Posted November 17, 2015 Share Posted November 17, 2015 Yea I did try that and it fell right through lol. Quote Link to comment Share on other sites More sharing options...
ihiryu Posted November 19, 2015 Author Share Posted November 19, 2015 Now we know, how much bigger do you think they need to be? Like would you say there was half an inch or more? Thanks, yours does seem a bit more visible than mine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.