zigen9 Posted May 20, 2013 Share Posted May 20, 2013 Hi eveyone, I have done the search about the observed service plug on the event forum. But no luck. Here is my question. I have Whitehead performance wired up a obd plug for me. Wiring is correct. I'm sure because I have double checked. I brought an eBay computer plug.scanner program. Did the whole.procedure correctly. But it doesn't show me anything. Anyone can tell me which scanner I should use that will work?? I really need it asap. Any help.would.be much appreciated Quote Link to comment Share on other sites More sharing options...
Domzs Posted May 21, 2013 Share Posted May 21, 2013 OBD II or Consult plug ? Most post 96 Nissan have both . And which software did you get , Blazt ? Quote Link to comment Share on other sites More sharing options...
loy Posted May 21, 2013 Share Posted May 21, 2013 My friend got a consult to work on his rb25 Quote Link to comment Share on other sites More sharing options...
zigen9 Posted May 21, 2013 Author Share Posted May 21, 2013 The program I have is tecu. But it doesn't work. There is also another program in the same CD. But it doesn't work either. Domzs: is that blazt you mention free?? Loy: where did your friend got his consult?? Quote Link to comment Share on other sites More sharing options...
Domzs Posted May 21, 2013 Share Posted May 21, 2013 Blazt is not free and it requires Consult connector . Quote Link to comment Share on other sites More sharing options...
zigen9 Posted May 21, 2013 Author Share Posted May 21, 2013 The blazt is it a computer program? I have a obd to USB. Quote Link to comment Share on other sites More sharing options...
Domzs Posted May 21, 2013 Share Posted May 21, 2013 It's a Nissan software which requires laptop and Consult connector . Check with Z1 Motorsport , where i got mine . I use it for the Z32 but should work with most Nissan with Consult connector . Quote Link to comment Share on other sites More sharing options...
zigen9 Posted May 21, 2013 Author Share Posted May 21, 2013 Do you think you can send me the blazt software?? I have the consult interface. The other programs doesn't work for me. Quote Link to comment Share on other sites More sharing options...
Domzs Posted May 21, 2013 Share Posted May 21, 2013 You have to buy it , requires pass code to unlock software . Doesn't cost that much and it's worth the money . You can get a lot of data and test functions , on the Z32 anyway . Quote Link to comment Share on other sites More sharing options...
zigen9 Posted May 21, 2013 Author Share Posted May 21, 2013 I will try to order that. Thanks for the info bud. Quote Link to comment Share on other sites More sharing options...
Domzs Posted May 22, 2013 Share Posted May 22, 2013 I will try to order that. Thanks for the info bud. You must have Consult diag. connector . Will not work with OBD II connector . Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted May 29, 2013 Share Posted May 29, 2013 there is NO JDM ODBII set up as they never had that system... Must use the Consult Plug and Program...... Quote Link to comment Share on other sites More sharing options...
zigen9 Posted June 1, 2013 Author Share Posted June 1, 2013 Thanks for reply. I have purchased NDS1 to do diagnostic. It works fine when it's freeware, meaning I can use the program when I turn on my car, even start up my car. BUT after I purchased (activated the program), It works when I turn on my car, but not start up my car. Anyone knows what's going on?? Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted March 13, 2014 Share Posted March 13, 2014 consult will not affect the motors ability to start and run....UN less wires we cut at the computer and not fixed....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.