Jump to content
HybridZ

brake booster vacuum line size


Recommended Posts

Okay, I have a 260z and I know the brake booster vacuum hose size is 3/8", but I only have a 1/4" nipple available on the intake manifold. I swapped in a 2jzgte. Can I just use a 3/8" to 1/4" reducer or will that not be sufficiant? I really don't want to pull off the manifold to drill and tap a new hole if I don't have to. Thanks

Link to comment
Share on other sites

This should be the ticket: http://autobahn88.com/catalog/en/533-10mm-to-6mm-aluminum-vacuum-hose-joiner-reducer-adapter-autobahn88-alj-6-10-.html

 3/8"= 9.525mm, 1/4"=6.35, so the the bigger end might be a bit loose, but plenty of room for clamps

thanks for the reply, but do you think that going down a size will effect how the booster operates?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...