Jump to content
HybridZ

My 280Z "Rustoration"


Recommended Posts

Hello, I wanted to post a build thread to document the process of my restoration. I have a 1975 280Z that I purchased off a local craigslist ad. Heres the ad.

post-29861-14150828451953_thumb.jpg 

Ive wanted one of these cars since I was in high school and was looking for one that was in decent shape without too much rust and that was running. I went and looked at this one and thought it was in pretty good shape. It had a little rust but I was thinking most of it was surface rust. I took it for a test drive and instantly fell in love. The motor was solid, brakes worked, and it cruised down the highway nice and straight. It felt like a great starting point for my project......so I thought.
Here she is the day I brought her home.

post-29861-14150828452126_thumb.jpg 

post-29861-14150828452645_thumb.jpg 

First thing I did was remove the front bumper

post-29861-14150828452965_thumb.jpg 

And the brackets

post-29861-14150828453341_thumb.jpg 

Edited by MattMatthewZ
Link to comment
Share on other sites

So once I got her home I had a chance to really look her over.

Spare tire area looked good so thats a good sign.

post-29861-1415082845483_thumb.jpg 

Some rust on the rear hatch.

post-29861-14150828455166_thumb.jpg 

Dash has the normal Z cracks.

post-29861-14150828479848_thumb.jpg 

Interior is rough but complete.

post-29861-14150828480192_thumb.jpg 

Also removed the rear bumper

post-29861-14150828480525_thumb.jpg 

Fenders need to be replaced

post-29861-14150828480845_thumb.jpg 

Drivers floor pan is pretty bad.

post-29861-14150828481158_thumb.jpg 

post-29861-14150828481334_thumb.jpg 

Some more rust

post-29861-14150828481507_thumb.jpg 

The drivers frame rail is rusted, both frame rails in the fender wells are rusted, the battery tray is pretty bad, and the rockers are rusted as well. 

There are definitely cleaner, more rust free Z's out there but it could be worse. I decided to move forward with the project and began to do a complete tear down for a full restoration. 

Edited by MattMatthewZ
Link to comment
Share on other sites

I scraped as much of the undercoating off as I could. This was fun....

post-29861-14150828487774_thumb.jpg 

Removed the fuel/brake lines.

post-29861-14150828488092_thumb.jpg 

Now shes ready to go to the media blaster.

post-29861-1415082848841_thumb.jpg 

post-29861-14150828488746_thumb.jpg 

She looked pretty pathetic when I left her there so I took a quick pic.

post-29861-14150828489163_thumb.jpg 

So with the car gone for awhile I turned my attention to stripping down the motor. I will be shipping it out to Rebello for a high compression 3.0 stroker set up.

post-29861-14150828489524_thumb.jpg 

post-29861-14150828490076_thumb.jpg 

post-29861-14150828490636_thumb.jpg 

post-29861-14150828490967_thumb.jpg 

All parts were labeled and sorted with ziploc bags. 

Edited by MattMatthewZ
Link to comment
Share on other sites

I got the car back after a week. They did a really thorough job. It was nice to finally work on it without getting dirty and greasy.

post-29861-1415082849129_thumb.jpg 

post-29861-14150828491625_thumb.jpg 

post-29861-14150828491942_thumb.jpg 

Then I worked on removing the suspension.

post-29861-14150828492289_thumb.jpg 

post-29861-141508284926_thumb.jpg 

Next I started working on the metal work. Now I haven't welded anything since shop class in high school but I was eager to learn so I went out and bought a welder and got to work!

post-29861-14150828492921_thumb.jpg 

post-29861-14150828493238_thumb.jpg 

post-29861-14150828493548_thumb.jpg 

post-29861-14150828493715_thumb.jpg 

post-29861-14150828493907_thumb.jpg 

post-29861-14150828494289_thumb.jpg 

post-29861-14150828494664_thumb.jpg 

Heres some welding shots

post-29861-14150828494828_thumb.jpg 

post-29861-14150828495265_thumb.jpg 

post-29861-14150828495592_thumb.jpg 

post-29861-14150828495906_thumb.jpg 

post-29861-1415082849624_thumb.jpg 

post-29861-14150828496502_thumb.jpg 

post-29861-14150828496668_thumb.jpg 

post-29861-14150828496838_thumb.jpg 

post-29861-14150828497002_thumb.jpg 

Edited by MattMatthewZ
Link to comment
Share on other sites

My dash was in need of some love so I followed the dash repair techniques on this forum and I think it came out really good. Not perfect but 100X better than it was. I ended up spending about $100 on materials and a good week or 2 of working on it here and there. 

Heres the materials I used. Plus I used Great Stuff expanding foam and Duplicolor Truck bed coating for the final coat.

post-29861-14150828544076_thumb.jpg 

Used the Great stuff expanding foam to fill in the cracks that were split open.

post-29861-14150828537311_thumb.jpg 

post-29861-1415082853764_thumb.jpg 

Then I used the bondo bumper repair to fill in the holes

post-29861-14150828538703_thumb.jpg 

post-29861-14150828539033_thumb.jpg 

Coat #2

post-29861-14150828539361_thumb.jpg 

Then applied the SEM glaze putty. This required 4-5 coats of applying then sanding.

post-29861-14150828539701_thumb.jpg 

post-29861-14150828540029_thumb.jpg 

post-29861-14150828540203_thumb.jpg 

Then primed with SEM flexible primer

post-29861-14150828540538_thumb.jpg 

post-29861-14150828540865_thumb.jpg 

I used the SEM texture coating to get a decent texture

post-29861-14150828541185_thumb.jpg 

Then sprayed with 2 coats of Duplicolor truck bed coating.

post-29861-14150828541365_thumb.jpg 

post-29861-14150828541545_thumb.jpg 

I thought it turned out pretty good. I cleaned up my dash support.

post-29861-14150828541716_thumb.jpg 

Then installed my new Fairlady emblem

post-29861-14150828542045_thumb.jpg 

post-29861-14150828542395_thumb.jpg 

post-29861-14150828542958_thumb.jpg 

post-29861-14150828543516_thumb.jpg 

What do you guys think? 

Edited by MattMatthewZ
Link to comment
Share on other sites

With all the welding done I built a couple make shift carts so I would be able to roll thee chassis around.

post-29861-14150828554825_thumb.jpg 

My painter picking her up.
post-29861-14150828555956_thumb.jpg 

Some body work shots.

post-29861-14150828557184_thumb.jpg 

Up on the rotisserie.

post-29861-14150828557512_thumb.jpeg 

post-29861-1415082855783_thumb.jpeg 

Finally some paint! The car will be painted 904 Ivory base coat/clear coat. The undercarriage was primered and coated with a color matched 3M undercoating.

post-29861-14150828558137_thumb.jpeg 

post-29861-14150828558452_thumb.jpeg 

post-29861-14150828558767_thumb.jpg 

post-29861-14150828560459_thumb.jpg 

Base coat only

post-29861-14150828559109_thumb.jpg 

post-29861-14150828559445_thumb.jpg 

Clear coat. Nice and shiny biggrin.png

post-29861-14150828559788_thumb.jpg 

post-29861-14150828560122_thumb.jpg 

And thats about where I am at as of now. He was going to deliver the car today but we are getting a nasty storm here in Colorado so it might have to wait until next weekend. He is going to do some more wet sanding and polishing and it should be good to go. I cant wait to see it!

Edited by MattMatthewZ
Link to comment
Share on other sites

It's a long road we travel to bring our cars back to life but one well worth the journey. Good work. In the long run you will always be glad you started naked. 

Link to comment
Share on other sites

Amazing work so far! Keep it up and continue posting pics, really enjoy them and picking up pointers .

 

 

It's a long road we travel to bring our cars back to life but one well worth the journey. Good work. In the long run you will always be glad you started naked. 

 

Thanks! I appreciate it.

Link to comment
Share on other sites

Looking good man. But I have to admit I think it's funny that you thought your driver's floor was "pretty bad." Most of us wish it was only that bad.

 

Haha, yea I've definitely seen worse. I was lucky I didnt have to replace the entire floor pan, just patched it.

Link to comment
Share on other sites

 Got the car back from paint and it looks amazing! He did an awesome job. No orange peel and it was wet sanded and polished to a beautiful shine. It feels really good to have it back, now i'm really excited to get this thing put back together. 


post-29861-14150828612408_thumb.jpg
Attached Thumbnails
  • post-29861-14150828608093_thumb.jpg
  •  
  • post-29861-14150828608644_thumb.jpg
  •  
  • post-29861-14150828609184_thumb.jpg
  • post-29861-14150828609717_thumb.jpg
  •  
  • post-29861-14150828610254_thumb.jpg
  •  
  • post-29861-14150828610789_thumb.jpg
  • post-29861-14150828611335_thumb.jpg
  •  
  • post-29861-14150828611875_thumb.jpg
Edited by MattMatthewZ
Link to comment
Share on other sites

My rear spoiler

post-29861-14150828624874_thumb.jpg 

My Xenon front air dam

post-29861-14150828625948_thumb.jpg 

My suspension parts came back from getting powder coated semi gloss black

post-29861-14150828627628_thumb.jpg 

My new brake set up from Silvermine. Stage 3 front 
post-29861-14150828629293_thumb.jpg 

My suspension setup. Eibach springs with Tokico HP shocks
post-29861-14150828629841_thumb.jpg 

All new factory rubber bushings

post-29861-14150828630393_thumb.jpg 

All new yellow zinc hardware from Fastenal

post-29861-14150828630952_thumb.jpg

Attached Thumbnails
  • post-29861-14150828624326_thumb.jpg
  •  
  • post-29861-14150828625411_thumb.jpg
  •  
  • post-29861-14150828626492_thumb.jpg
  • post-29861-14150828627057_thumb.jpg
  •  
  • post-29861-14150828628187_thumb.jpg
  •  
  • post-29861-14150828628746_thumb.jpg
Edited by MattMatthewZ
Link to comment
Share on other sites

 Rejuvenating my rubber!


Most of my rubber insulators and grommets were salvageable but some I had to toss and i'll replace. I dont really have any before pics but they were pretty nasty. 

Here was my process;

1. Soak overnight in jar of degreaser
2. Remove and scrub with stiff bristle brush
3. Then soak in Dawn dish soap
4. Rinse with hot water
5. Soak in jar with rubber rejuvinater overnight
6. Wipe down and coat with rubber protectant.

I know this may seem a little much for just some rubber pieces but it beats the hell out of paying to replace all of them.

Degreased:

post-29861-14150828635743_thumb.jpg 

The rubber rejuvinater I used. Made to clean and soften rubber.

post-29861-14150828636409_thumb.jpg 

Good as new (almost)

post-29861-14150828636071_thumb.jpg 

My Fuel / brake line insulators

post-29861-14150828636579_thumb.jpg 

post-29861-14150828636902_thumb.jpg 
Edited by MattMatthewZ
Link to comment
Share on other sites

 Had some time over the weekend to start putting her back together. Started with the fuel/brake lines. 


post-29861-14150828712368_thumb.jpg 

post-29861-14150828712905_thumb.jpg 

post-29861-1415082871334_thumb.jpg 

Installed the E brake hardware

post-29861-14150828713685_thumb.jpg 

And then started on the front suspension

post-29861-14150828713851_thumb.jpg 

Painted the front hubs and prepped them for new bearings

post-29861-14150828714273_thumb.jpg 
Edited by MattMatthewZ
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...