Jump to content
HybridZ

Recommended Posts

Hello, I own a 76 280z which is all bone stock, and the clutch is starting to really slip, almost undriveable, and a friend of mine offered me, his used clutch which is almost new, the reason being hes going to be making about 600-700 hp on his ls1 swapped 300z. But he offered me to have his old clutch because he just ordered a new racing clutch for his car, which was about 1700-2000$ and I was just wondering if a RB25 clutch would fit with the L28 transmission?? Thanks in advance.

 

Link to post
Share on other sites

The RB 25 clutch is a 250mm.  You would need to change out the flywheel, pressure plate and clutch disk to use it.  I am not certain if a RB25 flywheel will bolt on to a L series.

 

Once you get that taken care of them you will need to measure the assembly height to determine if the bearing collar needs to be changed out / modified. 

Edited by rejracer
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...