Jump to content
HybridZ

L6 Auto Meter Gauge adaptors for oil and water temp


Recommended Posts

I had tried searching and one of the references I found gave the incorrect autometer part # for the metric gauge adaptors for mechanical and electrical gauges for the L6 or at least  the block from a 28ZX Turbo. 

 

The thermostat housing has a temperature sensor fitting which is threaded for a M16 x 1.5. 

The mechanical gauge adaptor is autometer part # 2275 (5/8 - 18UNF to M16 x 1.5)

The same adaptor works for the oil temperature sensor in the sump on the ZX Turbo block if installing a mechanical gauge, a couple of fittings are also threaded the same, i have a cylinder head temp gauge installed at the rear of the cylinder head in the fitting used by the heater bypass.

 

For autometer electrical gauges use adaptor  autometer #2268

(1/8 NPT to M16 x 1.5 )

 

Hope this helps someone else,

Link to post
Share on other sites
  • 8 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...