Jump to content
HybridZ

1974 260Z Build


beon

Recommended Posts

Photos can be seen via the link below. I've attached two pics which show the car as it was on the day I purchased, and how it sits now. The car has been almost completely restomodded less completion of the paint, EFI, audio, and A/C. Pics tell the story. 

 

https://www.facebook.com/media/set/?set=a.2907404131179&type=1&l=a396af60a3

 

1974 260z JTR v8 Swap
Contributors: You (owner) and Bruce Kraft
Updated about 8 months ago
 
PublicFriends of ContributorsContributors Only
Car: 
Early(January)1974 Datsun 260 
Original Paint Code 305 : Light Blue Metallic. Or Possibly 307 Pacific Blue Metallic
Replaced Floor Pans
Added sub-frame connectors (Pete's Design)

Suspension:
Tokico Blue Shocks in front
Koni Adjustables in Rear
MSA Lowering Springs 
Urethane Bushings throughout 
MSA Sway Bar Kit
Camber Adjustment Kit on front and rear

Engine:
Early High Nickel 350 Chevy Block (Less than 2,000 Miles on rebuild) 
Bored .030 over / Complete Machine Work Completed at Lucito's Machine here in town(No - Cracks) 
Edelbrock RPM Aluminum Heads & Intake 
Summit Alum Valve Covers
Alum 1.5 Roller Rockers 
Edelbrock 400 Cam 
Edelbrock 600 Carb 
Summit Pistons
Alum Water Pump 
MSD Distributor/8.5 Wires/Blaster 3 Coil
High Volume Oil Pump
Shorty Headers
Brand New JTR (Z28) Radiator W/ Custom built shroud & custom upper radiator hose
Custom Dual Exhaust / Magnaflow Mufflers
Est 300+HP/~400Tq

Trans: World Class T-5 
Hardened Cobra (Mustang) Gear set (from TheGearBox.org)
Completely rebuilt, everything is new, Bearings/Syncros everything. 
New RAM Pressure Plate and Flywheel
New Tilton Master and Hydraulic Slave 
Hurst Shifter 

Brakes:
New Master Cylinder
New Vaccum Booster!!!
Toyota 4 Piston Brake conversion up front

Rear-end: R180 Rear open Diff 

Wheels: Rota Rb in front 17x7.5 and Rb-R in rear 17x8.5

Other: 
RX-7 Seats
Painless Wiring Harness 
RCI Fuel Cell 
Have most interior pieces 
Have NEW grey carpet set 
Bolt In (4point) Roll Bar
Full Set of AutoMeter Phantoms Gauges (Speedo/Tach/Vac/Oil/Temp/Fuel)
Oil Pressure Gauge is wired w/ copper from gauge to motor

many more other parts for the car including some A/C parts

post-38704-0-28179400-1418587855_thumb.jpg

post-38704-0-21779500-1418587856_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...