Jump to content
HybridZ

Original MM front Cobra 13" conversion question


Recommended Posts

Hi all

 

I have the one of the original MM cobra 13" conversions and started to wonder if I could improve the pedal feel with a change of pad material, there are a range of options for this set up based on the 2004 mustang.

 

This is the data that set me thinking http://www.hawkperformance.com/compound-graph it looks like HP+ should just be plain better than OEM, with a downside on dust, noise etc I expect.

 

I'd like to add a little bite when cold / warm - no track time.  I have the 240sx rear rotors and all the right proportioning valve, master cylinder modifications etc and I think the pedal feel could be better, its easy to lock the fronts without getting the feed back its about to happen.

I spent a lot of time testing and adjusting the proportioning valve until the rears never locked first when I first set this up a few years ago so I assume the bias is about as good as it can be for my set up.

 

But before I start fiddling again  :) - does any one know which pads Ross used to supply, I could not find any details written on the pads themselves so I dont know if I am starting from some generic OEM pad or a performance pad.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...