Front diff mount ripping car apart

[RB26powered74zcar]

I drilled and  re tapped those a little larger size, and to inches instead of millimeters  

[mtnickel]

I drilled and  re tapped those a little larger size, and to inches instead of millimeters  

BAH!

Nothing makes my ears ring more than imperial fasteners on a Jap/metric car. "is it a 14mm? 15mm? Bah, nothing fits!" (though i guess I could look at the head for markings).

 

Yes, I put a 5/8" bolt in, but that's only because spindle are worse!

Edited August 9, 2016 by mtnickel

[Miles]

sebaskir:

 

Bolt Sizes for front differential cross member

 

go here and page down to a picture/ table showing bolt sizes:  http://community.ratsun.net/topic/26238-my-swiss-1972-s30-240z-rebuild-project/page-22

 

 

 

And:  https://zcardepot.com/suspension/rear-suspension/rear-control-arm-transverse-bolt-kit-240z-260z-280z.html

 

 

From my notes:

 

Diff Cross Member  -    4 each        10 x 1.25 30mm long 30mm thread length (i.e., not a shoulder bolt)

 

As with all information on the web - trust but verify

Edited August 10, 2016 by Miles