Jump to content
HybridZ

Turbo Tom 3.1 Stroker


A Z for Me?

Recommended Posts

Okay folks -

 

I've got a line on a Turbo Tom 3.1 L Stroker, this motor has been blown, but I feel is rebuildable.  The price is right on this and would hate to let it slip away.  On a 3.1 stroker, can they be bored another .5mm as one of the cylinders has some damage.  Can you go an 89.5mm bore on all cylinders, then a balance.  This has the VO7 crank, 9mm rods, just needs an overbore, will get an align hone on the crank and cam, then a full rebuild, gaskets etc.  

 

Have plans on going EDIS and megasquirt

 

Just looking for some advice from the experts.

 

D.

Link to comment
Share on other sites

Well the story is, the previous owner was trying to tune it with a larger carburator, went lean, and there is some scoring in one cylinder.  only one piston was involved, #5, I believe.  Salvage yards here are now few and far between, thanks EPA.  

 

Anyway, the guy is wanting $1200 for this, yes it may be worth it, but I still have to get a car as well...and at this time nothing is nailed down as of yet...L28ET, , RB, SR, or LS....Just havent a clue as of this time

 

D.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...