Jump to content
HybridZ

Recommended Posts

So this is long over due.  I apologize.  

 

I said from the time I started leaching off of Hybridz and the collective knowledge here, that I would post pictures as I started to progress.  Well it has only taken a little over 3 years for me to start a build thread. 

 

Sorry.  So I will try to do my best and keep a thread going of the progress, but I feel the need to start from the beginning.

 

 

Always loved Z cars and in my teen years in the late 90's all I wanted was a 300zxtt, then I moved on to wanting a 350z and so on.  Times changed had lots of different cars, and kind of forgot about Z cars.  Planned on getting a project car, and debated between a factory five Cobra, or a 65/66 mustang fast back.  All with the same theme.  Old look new/newer running gear.  

 

A friend posted a picture one night of a light blue 260Z with ccw's, and My mind exploded.  I had been looking at and trying to justify the price of a mustang at the time (30-45000 CAD) so when I started looking at prices of reasonable shape S30's I was blown away.

 

I started searching and found a few in Canada.  A beautiful one in Windsor- seemed high for price, a couple others (kinda rough)  and then some down in the states.  

 

After hunting a bunch of ads, and becoming discouraged, I reached out to the guy in Windsor.  He drove the car up 3 hours to me so I could see it, and we worked out a much better price.  

 

It is a 1971 240z.  It was originally sold in Burbank California, and was imported to Canada in 2012 by the seller.  He pulled it all apart found no rust - so the car was coated in por15.

 

He swapped out the L24 for a L28 with an E88 head, and a 260 cam.  loaded the new mill in with a 280zx 5 spd and an open 3.90 r180 from White head performance. Engine ran awesome and was pretty strong!

 

All I needed to do was replace the brake drums and I was rolling. post-44329-0-89742900-1467826544_thumb.jpgpost-44329-0-52143000-1467826545_thumb.jpgpost-44329-0-98943000-1467826545_thumb.jpgpost-44329-0-41063100-1467826546_thumb.jpgpost-44329-0-78503200-1467826546_thumb.jpg

 

 

 

 

 

 

 

Link to comment
Share on other sites

So as you can see, tires were 60 profile and the car looked vintage, but the age and the condition of the tires were questionable.  As well the Mirrors were not the look I wanted.  Long term goal was to get the car to have a similar look to Christine Sepika's 280z, but unique.  Not looking to clone.  Just absolutely fell in love with the wheels and the wide zg flares.    I now had direction. ( And Christine was nice enough to share wheel specs so I could put my order in to Works. 

 

So second summer with the car it was time for tires.  you could swing the ass out any time.  They were dry. (but super fun)

 

Set of BFG Rivals added the grip, and bumped up the speed you could confidently carry.  post-44329-0-43348600-1467826805_thumb.jpg

 

 

Received a steering wheel from my wife for birthday gift.  (best wife ever) and ordered up a boss hub from Whitehead Performance in Scarborough Ontario.  These guys are awesome.  Tons of help.

 

Old Wheelpost-44329-0-78655000-1467826955_thumb.jpg

 

Old Hubpost-44329-0-33414900-1467826955_thumb.jpg

 

New Hub from White Headpost-44329-0-36375100-1467826956_thumb.jpg

 

New Nardi Wheelpost-44329-0-87855200-1467826956_thumb.jpgpost-44329-0-26855300-1467826957_thumb.jpg

 

Found the black center ring on the wheel would not stay on.  So hunted down some nice SS allen headed hardware and decided to ditch the ring. post-44329-0-69916600-1467827078_thumb.jpg

 

 

Took off the inner door skins and removed those plastic accordion mirrors.  Replaced with a set from MSA. The plan is to run these until body work money is saved then door mirrors shaved and fender mirrors will be added. 

So in the mad dash to have mirrors and wheel on for the July cars and coffee in Concord hosted by Engineered Automotive.....My starter shits the bed.

 

Whitehead performance to the rescue with a gear reduction starter.  Car ready.  Off to first show with the car!

 post-44329-0-22202700-1467827113_thumb.jpgpost-44329-0-69002800-1467827113_thumb.jpg

 

 

There were many more cars there that day, this was at roll in at 7:30am.  Think there might have been 25 cars there at this point.   post-44329-0-26722900-1467827114_thumb.jpg

 

 

Link to comment
Share on other sites

So on the way home from C&C car starts making an awful grind scrape noise going over bumps.  

Get the car back to the shop.....Find that all the chasing my friends 88 911 through the country roads ( and maybe a few bumps) has resulted in a broken DS rear coil spring.  

 

I had been researching the shit out of the coil over options at the time ( on here and other sites- the thread is still open), and this was the excuse that allowed me to pull the trigger. 

 

post-44329-0-78371300-1467827845_thumb.jpg

 

I ended up ordering the set up from Sakura Garage.  They make their own camber plate, and pair it with a set of Stance Coilovers.  Awesome quality and first rate customer support from Sakura Garage. 

 

So this is when things slow down on progress, and I basically start part collecting. 

Wheels are ordered (amazing group buy that I couldn't pass up)  And was able to get a set of Work Meister CR01's in grey face with polished bronze lip. Thanks again Peter at NEXTMOD in Markham ON.

post-44329-0-26567600-1467828052_thumb.jpg

 

  Found a set of Z force productions BAMFZG flares on DPAN on facebook.  

 

I have yet to install....Might still call jpngarage and get their set.  They just look to be more finished?  could be off here.  Would love input. 

 

Started hunting seats as well.  Got a deal on these Chronosport fixed back seats as they were in stock at a supplier, and from my understanding Sparco is not making this seat any more.  Narrow enough to fit the car but wide enough for my ass.

post-44329-0-81327500-1467828051_thumb.jpg

 

 

Link to comment
Share on other sites

More time passes and winter of 2015, a couple of buddies, (Rick and Robbie) come over and we pull out one seat, and the front suspension,,,,and half of the rear suspension.  I had collected more parts in this time. 

post-44329-0-18946800-1467828617_thumb.jpg

post-44329-0-83066800-1467828616_thumb.jpg

 

 

Here is the T3 GTx2 front control arms, along with RCA. 

post-44329-0-45626700-1467828616_thumb.jpg

 

Started cutting the strut towers for the camber plates.  where I don't have air in the shop, I used a dremmel with the new cut off wheels they are offering.  Worked well, but expensive, as you tear through discs.  I think I used 20 discs

post-44329-0-43747000-1467828618_thumb.jpgpost-44329-0-79627100-1467828618_thumb.jpgpost-44329-0-24867200-1467828619_thumb.jpgpost-44329-0-18071200-1467828642_thumb.jpgpost-44329-0-69551300-1467828642_thumb.jpg

 

I ended up having the vanity plates powder coated to match the car by JP at Stripping Technologies in Cambridge ON.  He has an amazing 510 with an engine from an AP1 s2k.   JP has been a wealth of knowledge and an amazing beast of a human to have in your corner through a long build. 

 

post-44329-0-41106500-1467828615_thumb.jpgpost-44329-0-89466600-1467828615_thumb.jpgpost-44329-0-90151000-1467828640_thumb.jpg

 

Took front a rear components up to Works Garage and JP and Cambridge James helped to section the front strut tubes.

post-44329-0-54826900-1467828617_thumb.jpgpost-44329-0-00067000-1467828618_thumb.jpgpost-44329-0-68098100-1467829224_thumb.jpg

 

After Cambridge James, (beauty 280z build) and JP and I got out one of the spindle pins, JP took the other half of the rear suspension to Hit Man Hot Rods, and they removed the other spindle pin (with great effort) , sectioned the strut tubes and welded the rear collars to the carriers. 

 

New hardware, wheel bearings all waiting to be installed. 

post-44329-0-16351400-1467828643_thumb.jpg

Link to comment
Share on other sites

So the open 3.90 diff was dropped out with the mini prop shafts.  

post-44329-0-75223400-1467829482_thumb.jpg

 

Picked up a Subaru r180 with a 3.90LSD from an importer in Montreal Quebec. Got a set of the Beta Motorsports stub axle/adapters.  (which are just art.....god they are pretty.)

and new studs.  (I have new nuts from MSA just not in the picture)

post-44329-0-23743300-1467829482_thumb.jpg

post-44329-0-65703600-1467829483_thumb.jpg

 

All mated to the T3 Moustache bar. 

post-44329-0-22023500-1467829483_thumb.jpg

 

Side note Gabriel at t3 is amazing. and the product craftsmanship is beautiful.

post-44329-0-22023500-1467829483_thumb.jpg

 

 

Removed the drop mounts and dog bone....post-44329-0-82544000-1467829485_thumb.jpg

 

and got some more t3 goodness. 

 

post-44329-0-99863800-1467829484_thumb.jpgpost-44329-0-26224100-1467829486_thumb.jpgpost-44329-0-85504200-1467829486_thumb.jpg

 

cleaned up and refinishing pretty much everything that comes out before it goes back in. 

This is the forward- inner LCA/dif mount

post-44329-0-75984300-1467829487_thumb.jpg

 

 

Link to comment
Share on other sites

So this is where I realize that I am not going to be ready for Z con in August in my back yard of Toronto Ontario..... but making progress non the less. 

 

Here are some shots of other items going in.  

 

Companion flanges and e brake hardware after a coat of paint. 

post-44329-0-37379200-1467829914_thumb.jpg

 

Rear carriers/hub after a coat of flat black.  Along with outer stub axles.  This is all ready to go back together. post-44329-0-89206400-1467830068_thumb.jpgpost-44329-0-50046500-1467830069_thumb.jpgpost-44329-0-43459400-1467829915_thumb.jpg

 

I have also ordered (almost a year ago)  Front and rear disc brake set up from Gabe at T3. 

 

Awesome product. 

 

post-44329-0-55748200-1467829965_thumb.jpg

 

post-44329-0-46419600-1467829916_thumb.jpg

(we have decided that the caliper bracket needs to be flipped. 

 

As well got back the MSA SCCA roll bar from JP at Stripping Technologies, who has powdered coated it to match the paint!

 

post-44329-0-96659400-1467829914_thumb.jpg

 

 

So from here on out I am going to try and keep up more detailed posts about each mini project.  Would love any extra knowledge on this if you are following.

 

Thanks all!
 

post-44329-0-94939500-1467829915_thumb.jpg

Link to comment
Share on other sites

Looks great!  I'll be interested to know your thoughts on the coilover kit once it is all done and back on the road.  I plan to do coilovers soon and was looking between those and the BCs.

Link to comment
Share on other sites

Yeah has definitely saved me  a lot of headaches.   

 

Put together the rear wheel bearings this afternoon.  And should be able to bolt up rear brakes tomorrow.  pretty excited.  will get some pics up of the assembly.  

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Ok- so I am staying true to my promise to myself that I would keep documenting this as I progress. 

 

So installed the CV adapters for the wolfcreek racing CV kit. Borrowed some Blue Lock tight from work and buttoned these up.  New hardware and it matches nicely with the t3 m mustache bar. post-44329-0-41961100-1469890632_thumb.jpg post-44329-0-04201400-1469890634_thumb.jpg

 

Finished cutting the strut towers and lining up the Sakura Garage camber plates.  It is a bit of a pain cutting them with the hatch still on ( realitive to cutting the front towers)

post-44329-0-98121200-1469890632_thumb.jpgpost-44329-0-43361300-1469890633_thumb.jpg

Forgot to get a picture of it all finished and painted but will put up another shot. 

 

Installed the CV adaptors to the companion flange on the out side assembly.  Found this was really easy to do by fliping a wheel on its face and mounting it.  When torquing, I was able to just hold the tire in between my feet to add a bit of stability. post-44329-0-25936400-1469890947_thumb.jpgpost-44329-0-39816600-1469890948_thumb.jpgpost-44329-0-27176800-1469890949_thumb.jpg

 

They really are a pretty little piece. post-44329-0-73976800-1469890949_thumb.jpgpost-44329-0-20776900-1469890950_thumb.jpg

 

 

Next up.....RT diff mount install, t3 e-brake cable, t3 droup mounts, and dog bone, diff, ect. 

 

Link to comment
Share on other sites

Hub was good.  Installwas easy, fitment was good.  I struggled a little with horn button but got it sorted. 

Whitehead Performance got me the hub. 

 

I didn't go with the deep corn.  I am 6'4" and didn't want to have the steering wheel any closer.  

Link to comment
Share on other sites

  • 4 weeks later...

So not much progress being made here.  Missed ZCON. first time in CAnada, and in my back yard......missed it.   Cool.  :(

 

Started assembling hubs and started dicking around with the front set up.  Very concerned with clearance issues with the RCA and the GTx2 control arms.  Had a chat with the Josh at T3.  Super helpful guy.  Lots of info.    They have gone to a shorter shouldered nut on the bottom of the post on newest version, as well the post is now 5/8" not 3/4".   Leaves me in a bit of a bind on this one though.  If I cannot clear might get a shorter shouldered nut and cut the excess post.  

 

Will not know till it all goes on.  Not so worried with the final wheels they are 15*9 +53- so i doubt the much of anything will be inside the barrel of the wheel.  but the 15*7-0 will be a different story. 

 

I have not cut the car to put flares on yet, as I was hopping to run the 15*7 -0 till I was ready to go wide. 

 

post-44329-0-37718500-1472564215_thumb.jpgpost-44329-0-03238600-1472564216_thumb.jpgpost-44329-0-72562000-1472564690_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...