jbenj00 0 Posted January 8, 2017 Has anyone used the gm muscle car ls oil pan kit in the 280z with the jci mounts? https://m.summitracing.com/parts/nal-19212593?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-chevrolet-performance&gclid=COu509uHs9ECFRCHswod7mUOgA Quote Share this post Link to post Share on other sites
bigwillie67 0 Posted January 9, 2017 is the F body pan recommended for that kit? On paper the dimensions appear it would but I'm not familiar with that kit. Quote Share this post Link to post Share on other sites
jbenj00 0 Posted January 9, 2017 The complete fbody pan is only 100 more. Guess I'm ordering that! Thanks Quote Share this post Link to post Share on other sites
jackjhart 0 Posted January 30, 2017 Did we ever get any options for oil pans? I'm building an LS1, It currently does not have an oil pan. Is there a list of ones people have already used? I would like to find one with some good baffling if possible. Quote Share this post Link to post Share on other sites
jackjhart 0 Posted January 30, 2017 Anyone used this? http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=OP-LS1-300ZX-for-240Z&Category_Code=240Z Quote Share this post Link to post Share on other sites
Grandpa 1 0 Posted February 22, 2017 I used a camaro oil pan from Rock auto and pickup tube , wind age tray. Nice low profile. Much cheaper. Quote Share this post Link to post Share on other sites
the350z 0 Posted March 5, 2017 I just got mine in and cleared the steering rack, 260z with dirty dingo mounts. although I haven't got a trans hooked up yet. Quote Share this post Link to post Share on other sites
Redxiii 1 Posted March 8, 2017 The350z: are you using the muscle car oil pan then? Hows the clearance under the car? Quote Share this post Link to post Share on other sites
the350z 0 Posted March 11, 2017 (edited) I am. Its about 3 1/2 inches from the ground, my car is lowered 2 1/2 inches as well. think I may send it back to summit because it is pretty low.. Edited March 11, 2017 by the350z Quote Share this post Link to post Share on other sites
auxilary 39 Posted March 11, 2017 I used the LS3 C6 corvette oil pan/windage tray/pickup tube. Here's the comparison between C6 and F-body oil pans: Fbody oilpan hangs about 3/4" to 1" below the front cross member. C6 alleviates that issue, but if you need to drop the oil pan, the engine needs to be lifted to clear the crossmember for oil pan removal. Quote Share this post Link to post Share on other sites
Savage42 21 Posted March 23, 2017 I have the F-body pan and added the Improved Racing (hinged) baffles and the crank scraper. Should be good to go and clearance isn't bad since I didn't slam my car. Quote Share this post Link to post Share on other sites
the350z 0 Posted March 25, 2017 would that be the same LS3 oil pan for the 2014 Camaro? Quote Share this post Link to post Share on other sites