Jump to content
HybridZ
duragg

Wolf Creek / FutoFab Install Instructions?

Recommended Posts

"Tighten all Grade 8 bolts to 35 ft/lbs.  These bolts have a cross drilled head for safety wire."

 

Nuts mounting adapters to stub axle and companion flange specify 50 lbs.  Let me know if you need more info or a scan or something.

 

That hub side safety wire about kills me. I'd like a lift, drop control arms for access, and an aviation tech to do the work.

Share this post


Link to post
Share on other sites

Perfect, thanks.

I have the whole Hub assembly removed for rebuild also so might just mount and wire the hubs and Cv on the table then I just have to click the inners in the diff.

 

Genius!  (fear no spindle pin). Get an aviation tech with his pliers and it's perfect.

Share this post


Link to post
Share on other sites

Good luck trying to get 35lbs on those allen heads. I stripped one out trying and contacted futofab. Apparently the instructions weren't updated with the hardware update. 35lbs on a 1/4' bolt is high by any standard . I can't remember what we agreed on , but I'm almost positive it wasn't that high  

Share this post


Link to post
Share on other sites

I believe we have the same ones. Just think about 35lb on a basically a 1/4" allen head. I'd go tight and safety wire. I also think the original bolts were hex head that could handle more torque at the head. Some of them will take the 35lbs, but they are on the ragged edge of stripping the head of the bolt   

Share this post


Link to post
Share on other sites

Took me all day Sunday getting to this point. Didn't have the energy to mount in car, think I need a budddy to assist.

New bearings and seals.

Konis back in and gland nuts tack welded (just a tiny weld bridge to Lock)

New steel adapters and new CV joints.

 

Ready to race this weekend.

post-1894-0-02794100-1486992720_thumb.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...