Nismo insulators, Isky cam, L28 rods and flat top pistons, pistons rings, bearings, etc

[ryant67 8]

All items located in Kingston, Ontario, Canada.
Prices are in US dollars, and shipping is extra.

**pics to follow in replies**

Feel free to ask questions, I'm also happy to provide lots of high res pics, so just ask. Low ballers will be ignored

-

NISMO Mikuni Insulators - New in box, each box has two in it. These are the thick rubber carb insulators. NLA. I have several boxes of these - $SOLD!

Isky L6 camshaft - Newly ground from a stock camshaft. 270 duration with .540 lift. Great street cam - $SOLD!

L28 rods and 87mm p79 flat top pistons - appear to be new/unused. Pistons are OEM and appear to be 87mm. Comes with ARP hardware, and I have a set of piston rings that I am 95% sure go with them. I weighed each piston/rod set, and all six sets were exactly 1276g. - $SOLD

Sealed Power piston rings - parts #SP E488KC 1.00 - New in box, I suspect the 1.00 in the part number means these are 1mm oversize? I could be wrong though... $60

Venolia Piston Rings - boxes marked 3.426. Appear to be new. I matched them up against the Seal Power rings I also have for sale, and the sizing seems to be the same. There are only 4 of the second rings in the box, instead of 6. The rest of the rings are in sets of 6. Price reflects this. - $20

Used rocker arms - pulled from several L engines. I have a few dozen of these. Will need resurfacing prior to use. Let's say $SOLD!

Bearings:
Clevite 77 -.25mm rod bearings - two boxes. $18 each box, or $36 for both.
Clevite 77 -.25mm main bearings (2x4) - $50.
Vandervell STD rod bearings (part VP 91614 STD) - NLA part. $25
Vandervell STD main bearings (part VP 91562 STD) - NLA part. $35

Hood hinges - in great shape. Still have the zinc coating. $70

240Z small gauges - two water temp/oil ones, and one amp/fuel level one. Good for gutting to install aftermarket gauges, saving you from cutting up your stock ones. $25 each, or $65 for all three.

Wide Ratio 5 speed - came included in a large used parts buy. I haven't run it, and cannot be certain it's 100% good. It does shift smoothly though. Not shipping. $200

R180 open diff. - 3.545, has water contamination, so the oil has turned seriously gunky.  Needs a good clean.  I'll see about tackling this if I get bored enough.  Otherwise the price has been marked to reflect this.  I'm not seeing any corrosion though.   $50

240Z washer bottle - $40

5 speed shift lever - $30

Mallory distributor cap 270 and rotor 309 - $30
 

Edited May 18, 2017 by ryant67

[ryant67 8]

Nismo Insulators for Mikuni carbs.  44mm bore.  Will work with DCOE, OER, Dellorto as well though.  New old stock.  

Rods and Pistons - stains are just oily fingerprints from handling.  

[ryant67 8]

Bearings, used rocker arms, and hood hinges.  

[ryant67 8]

5 speed transmission, piston rings, washer bottle, and mallory cap and rotor.  

[ryant67 8]

Isky L6 camshaft

[Zetsaz 10]

Do you have the mount for the washer bottle?

[ryant67 8]

No sir, just the bottle as pictured.

[ryant67 8]

Bump, listing updated.  

[luial 0]

Interested in the R180 Diff. What ratio?

Thanks

[ryant67 8]

I'll open the sucker up and take a look for you tomorrow.

[luial 0]

I'll open the sucker up and take a look for you tomorrow.

Thanks. Did you have time to take a look?

[ryant67 8]

Ack, sorry, I worked a lot of overtime this past week and forgot. I'll try tomorrow for you.

[luial 0]

Ack, sorry, I worked a lot of overtime this past week and forgot. I'll try tomorrow for you.

Please do.

Thanks

[ryant67 8]

Stamped 39:11, so it's a 3.545.

 

There's a good bit of 'sludge' in there though, looks like water contamination. I'm not seeing rust, but it'll need a serious clean before being used.

 

Also, I just noticed that you're in the Philippines. Shipping something this heavy from Canada to there would cost probably around $300 USD...

[luial 0]

Stamped 39:11, so it's a 3.545.

 

There's a good bit of 'sludge' in there though, looks like water contamination. I'm not seeing rust, but it'll need a serious clean before being used.

 

Also, I just noticed that you're in the Philippines. Shipping something this heavy from Canada to there would cost probably around $300 USD...

Thanks for checking.

That is same as what I have in the car. Looking for 3.9 (or close).

Thanks anyway

[ryant67 8]

No problem, good luck in your search!  

[TimZ 22]

Isky L6 camshaft

FYI - this is the same cam that I'm using - my results have been pretty good

[luial 0]

Interested in the Isky Cam.

pm sent

[rjracin240 11]

Ryan sent you an email about parts discussing and to send me a paypal invoice.

Will be at work tomorrow so send me an email so we can get this wrapped up

[ryant67 8]

Isky camshaft sold!

Some of the insulators sold too.  Still have another 6 boxes left though.

[ryant67 8]

Bump!

Transmission available again, buyer backed out.  

Still have 6 boxes of insulators left - I'm in no hurry to sell them, so the price on those suckers is firm.  Once they are gone, they're gone, and good luck finding more NOS ones

[ryant67 8]

All Nismo Insulators are SOLD!