Jump to content
HybridZ

Supra 440cc injector CLIPS


zeiss150

Recommended Posts

Hi Guys!  I'm slowly acquiring all my parts for my L28 TURBO build  and I've hit a wall.  I can't find injector clips for the 440cc Toyota supra 7MGTE injectors.   I tried ebay and got burned on a set of 6 clips that stated in the sales page that they would fit the 7MGTE injectors (it was only $12... but ... grrrrr)  Annnnnd they don't fit .  

 

So does anyone know a good source to buy new ... or used... Injector clips. 

 

thanks a bunch!

 

Matt-

 

P.S.  Shout out to Pallnet... Just ordered a fuel rail from him.  Great seller!

Link to comment
Share on other sites

There are universal Nippon Denso connectors that fit both the high and low tab style of Toyota injector terminals.  You can get them on E-Bay, but I saw a Vendor on Church of L series that specialises in conversion harnesses the other day. I'll see if I can find the link. 

 

I made the same mistake the first time I ordered EV1 to Nippon Denso conversion harnesses. I finally found the correct ones. I'll look for that as well. Was a while ago. 

 

Edit: Here are the correct Toyota connectors that fit both the high and low side tabs on Toyota

 

https://www.ebay.com/itm/6x-Female-Fuel-Injector-Connector-Electrical-Plug-Adapter-For-Kia-Nissan-Toyota/291929715010?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 

 

s-l1600.jpg

 

 

Edited by Chickenman
Link to comment
Share on other sites

I bought the bottom slots according to my receipt. 

 

They look like they do on the website.

http://www.driftmotion.com/Denso-Bottom-Slot-Conn-F2-p/dm1611.htm

 

A bit of hackery, but if you have the denso clips, but they just have the wrong slot, you can shave the ears off of the injector.

Edited by seattlejester
Link to comment
Share on other sites

On 1/12/2018 at 2:25 PM, Chickenman said:

Now you tell me!!! LOL. 

I believe I am the one who also told you they weren't EV1 but I was not doing harness's then .

 

On 1/12/2018 at 5:13 PM, seattlejester said:

I bought the bottom slots according to my receipt. 

 

They look like they do on the website.

http://www.driftmotion.com/Denso-Bottom-Slot-Conn-F2-p/dm1611.htm

 

A bit of hackery, but if you have the denso clips, but they just have the wrong slot, you can shave the ears off of the injector.

 

That works too lots of gm guys do that for crank and cam plugs. slots are different. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...