Jump to content
HybridZ

1977 280z 1jzgte


Recommended Posts

Link g4+ monsoon stand alone ECU,Panic Wire harness,10lb flywheel, 264 cam shafts, Head ported (intake side only), Adjustable cam gears,

Eclutchmasters 6 puck unsprung clutch and pressure plate (stage 4)Drift Motion turbo kit Billet 6262 turbo (Garrett internals), manifold, wastegate tial replica, and 3" downpipe, Hks bov replica, Aeromotive fuel pressure regulator, 440cc injectors,Bosch 044 fuel pump, Arp head studs, Aem wideband
Short throw shifter, a/c and p/s delete (shortened serpentine belt and new ribbed pulley on tensioner),vvti coils wasted spark setup, CX racing intercooler , 

KIMG0838.JPG

KIMG0843.JPG

KIMG0831.JPG

Screenshot_20190209-221709.png

Screenshot_20190209-221716.png

Screenshot_20190209-221724.png

Screenshot_20190209-221732.png

Screenshot_20190209-221759.png

Screenshot_20190209-221808.png

Screenshot_20190209-221825.png

Screenshot_20190209-221834.png

Screenshot_20190209-221908.png

Screenshot_20190209-221919.png

Screenshot_20190209-221928.png

Screenshot_20190209-221650.png

Screenshot_20190209-222020.png

Screenshot_20190209-222010.png

KIMG0857.JPG

KIMG0721.JPG

KIMG0720.JPG

KIMG0514.JPG

Edited by 1jzs30
Typo
Link to comment
Share on other sites

15 minutes ago, 1jzs30 said:

 

New to this site and this is my first ever build took a couple years to get this far I am open to suggestions or ideas or something that could be changed for the better please let me know

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited by 1jzs30
Link to comment
Share on other sites

On 2/9/2019 at 10:30 PM, 1jzs30 said:

 

Thank you, my original hoodlach was a little messed up too so I cut it off too , I flattened it back out in a vice and cut the top off and built a box under it with flat bar for stability, painted it  and re attached it with bolts to it's original spot weld holes I drilled out in order to remove it 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KIMG0811.JPG

Link to comment
Share on other sites

Ok, so you just modified the original, that's cool. Have you noticed any flex in the latch while driving? Is it only held on by the two upper bolts?

 

Mine is a bit too mangled for that (and I wasn't particularly gentle in removing it once I decided it had to go), so I would have to make the whole thing from scratch.

 

The box design looks pretty good, is it open from the bottom?

 

The current plan is to clone this https://www.thezstore.com/page/TZS/PROD/classic13/10-1873 (because I think that's a little steep for two chunks of steel)

Link to comment
Share on other sites

Nice I like that one in the link, yeah I only have the two bolts up top, I don't notice any hood bouncing while driving, I do have concerns about it flexing up like if I pop the hood and someone tries to open the hood without undoing the hook but as long as that doesn't happen it's pretty solid for normal operation. I have been thinking of just adding a third bolt underneath in the middle in the flat bar too!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...