Jump to content
HybridZ

Help evaluating a potential project car


Recommended Posts

I'm looking for a 240/260/280z project car and could use the forum's collective knowledge on a 280z I found. I know to expect some rust on a '77 Datsun (and with this car I would be OK spending  up to $10k for rust repair and paint) but I want to make sure I'm not missing major red flags. What do you think about the vehicle shown here? A friend mentioned that the area where the control arm mounts looks like it is separating and the seams down the side looks like it has filler (and there may be some rusting through around there).

 

And, yes, I know it's impossible to know for sure without seeing it in person. I honestly just want to know if it's worth dragging my mechanic friend across town to see the car.

 

Thanks!

57154625_340517129921852_2743337363055837184_n.jpg

57076262_1973817006258951_8010450972994174976_n.jpg

57134522_2304593459759298_7321268907086446592_n.jpg

57154235_308543053171910_8362793296635887616_n.jpg

57161009_643887882750409_3117767930406764544_n.jpg

57247008_625238657927807_3927447580136439808_n.jpg

57297789_582720955537373_5290076635406532608_n.jpg

57364788_457339408336785_5987583636424097792_n.jpg

57393049_1937047916399185_1541776938664722432_n.jpg

57437591_903364233328315_4249127170179334144_n.jpg

57598407_1167425003429002_4785425391240085504_n.jpg

58049109_863227940676546_1902262417220435968_n.jpg

60428463_377871089489429_1675161339930083328_n.jpg

60560962_605552483297861_433394107478441984_n.jpg

60636015_615283195632374_3410926867429982208_n.jpg

60817838_406441770086355_7279115220415414272_n.jpg

60938855_278233789615553_9156068490577182720_n.jpg

Link to comment
Share on other sites

The pictures show a pretty normal old "survivor" car.  Dents from speed bumps, light rust.  No red flags at all.  It even still has the damper weight on the diff mount crossmember so nobody's been modifying it.

 

But for $10,000 you could probably find a nicer 1977 280Z.  I don't see anywhere near $10,000 of rust repairs on that car though.

 

Value depends on plans.

Link to comment
Share on other sites

You didn't mention what the purchase price was; but that certainly looks like a pretty solid shell from underneath.  If it's been west coast, or Colorado area, it's whole life, that bodes favorably for being close to rust-free.   If you haven't already done so, pull the carpets up and inspect the floor pans, firewall, rear shelf, and spare tire well from inside the car.   The ice pick idea from bunkhouse is a good one.

 

What kind of "project" are you contemplating?  If going for an all-original restoration, then obviously the condition of the interior and drivetrain can be as big a cost factor as the shell.  If contemplating a track car and/or engine swap, then that stuff is obviously less important.

Link to comment
Share on other sites

Thanks for all of the really helpful responses! The owner wants $3,000 (engine doesn't run well, it's an automatic, and the interior is pretty trashed). I just wanted to make sure I wouldn't put more into body work than it costs to by a better sorted version. My goal is to make a canyon carver so new suspension, engine/trans/LS diff swap, etc.

 

Any thoughts on that plan?

Link to comment
Share on other sites

Yes, $3K is a very reasonable price for a solid car, even with the engine and interior issues you've noted.  Also, being a 280, the shell is made with thicker sheetmetal throughout than earlier year models....so that makes it a sturdier platform for engine swaps/stiffer suspension/etc.

Link to comment
Share on other sites

11 minutes ago, jhm said:

Also, being a 280, the shell is made with thicker sheetmetal throughout than earlier year models

I've had four Zs to compare against (early 71, 72, 76, 78) and from what I can tell that's not really true. The series one cars do, in fact, have thinner metal (about 0.9mm vs 1mm for later models), but otherwise the metal thickness as far as I can tell is generally the same. What you will find in the later models is additional reinforcements used, which means more metal. 

Link to comment
Share on other sites

Actually, I've seen differences just between my '73 early-model 260 and my '74 late model 260.  Maybe some of that is due to thicker metal, double-layering, or additional reinforcement; but the bottom line is that it results in a stronger/stiffer shell.

Link to comment
Share on other sites

  • 4 weeks later...
On 5/23/2019 at 3:47 PM, rturbo 930 said:

I've had four Zs to compare against (early 71, 72, 76, 78) and from what I can tell that's not really true. The series one cars do, in fact, have thinner metal (about 0.9mm vs 1mm for later models), but otherwise the metal thickness as far as I can tell is generally the same. What you will find in the later models is additional reinforcements used, which means more metal. 

That's an ongoing debate, with lots of anecdote but no definitive data.  That said, "anecdote" points to ~100 pounds difference in weight between the totally stripped metal tub of an early 240 and a 77-78 280.  Perhaps BoulderCharles will have occasion to weigh the stripped-down tub, if he embarks on an ambitious restoration/modification.

 

Back to the topic, this looks like a solid purchase.  The Z market has changed over the life of this forum.  Back in the year 2000, a good (but not spectacular) condition 280Z could be found for $1500 or so.  It would have blemishes, but in many cases only "minimal" rust.  Today, from what I've seen, that price-point has risen by a factor of 3 or 4.  So, this particular purchase is an excellent deal!  I look forward to seeing the progress of the build.

Link to comment
Share on other sites

  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...