Jump to content
HybridZ

Plugs in head (4 near cam)


Recommended Posts

3 hours ago, ZHoob2004 said:

Core plugs for the coolant passages. My machinist said there's usually no reason to remove them.

 

 

2 hours ago, D9inger said:

I’m glad you could answer that, I was drawing a blank 

 

Thanks guys. I screwed up, and wasn't paying attention... I ended taking one out, thinking it was a head screw, and stripped the socket head during the process. zcardepot doesn't carry them. They look the run of the mill. Are there anything special with them? BSPT?

Link to comment
Share on other sites

18 hours ago, D9inger said:

I'm pretty sure they are BSPT Male. It's a metric tapered thread. 

https://www.mcmaster.com/metric-pipe-fitting-plugs

If you google it, it'll explain allot, or look here

https://www.ralstoninst.com/news/story/the-difference-between-npt-bspp-and-bspt-seals

It's NOT NPT

 

Thanks, I was hedged my bet with bspt; being Japanese and all. Unfortunately, mcmaster carr only carried the lower profile ones. I ended ordering some thru ebay.

 

And for anyone else that runs into this trouble... I measured the plug to be 1/2" pipe thread (assumed BPST) and 20mm thick.

Edited by scartail
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...