Jump to content
HybridZ

1971 240z ITB install


DuffyMahoney

Recommended Posts

11 minutes ago, Zetsaz said:

Every time I see your car and those ITBs I want to sell all my car stuff and just start with a super clean earlier model and go ITBs. Speed be damned.

 

It's looking real good!

 

I think the average Z guy thinks I am nuts doing these mods to my low miles series 1:) So far not a single hole or permanent thing has been done to my car though.  

 

Thanks! 

Link to comment
Share on other sites

I got a reply today from Jenvey on the additional air ports. They said they sent me the “wrong ones” a few hours later a package arrived from jenvey with a new longer set that looks like it might do the trick. Now had they sent me 6 instead of 4 we would be in business. Which one do you have? Note the barb I turned off of the short one. They both had a barb originally.FAA928B6-15CD-48A5-AF21-9F0A57481E5C.thumb.jpeg.a79d9b7fbab3e5095be3509f7750187c.jpeg

Edited by tioga
Link to comment
Share on other sites

I was just curious which one you had. 

 

Something else I did was to get the light weight return springs for the throttles. They have two weights. They normally come with the heavy. When three are connected as triples it is rather stiff. The light version is perfect. 

Link to comment
Share on other sites

  • 2 weeks later...

dampener doctors rebuild my stock Dual v crank pulley (keeping AC) . Then this is a 60-2 trigger from Hoke. I had to lathe off the back slightly. The trigger ring was not made for my pulley. Works awesome. It’s a great kit. 
 

I will have it professionally epoxy painted black. They must of rattle canned it. 

B6A12F58-7BB9-4695-A132-4586C53E3822.jpeg

C35E505B-8CAD-4C2F-8F21-4F18A54AE54B.jpeg

536F465A-C4F9-40F6-8A38-CB13B0BE52AE.jpeg

68C2409A-9E04-4A1B-AE4A-54325D565762.jpeg

52E6EAE9-9A41-43B7-B51F-E39F32555BF0.jpeg

Link to comment
Share on other sites

I would want my ring attached to the center hub not the rubber mounted outer portion. There is movement in the outer ring depending on load of the alternator, a/c compressor and motor acceleration. It should definitely be mounted to the center hub. No car manufacturer Ever mounts the trigger wheel to the outer hub of a harmonic balancer. 

Link to comment
Share on other sites

Well I found a 2nd hole I didn’t know I had. I tested it and I should be able to fit all wiring with zero new holes in the car. So that’s a full efi install with zero holes or Permanent mods! Stoked. 
 

02 sensors go through the shifter hole. 
 

Tps, air temp, coolant temp, home signal and injectors through the choke hole. 
 

R35 coils, crank trigger, oil pressure, fuel pressure, dual positives and ground will go through the hole below the stereo.  

 


 

 

 

 

 

FAFE5E24-0481-4D0A-B482-407C53463C71.jpeg

5A4C9B13-316D-4035-B31E-7A3AC6140F93.jpeg

Link to comment
Share on other sites

I got way further on my ITB install. My kick panel mount worked perfectly and I have about 2 spare inches on the wiring harness. I successfully installed it all with zero cutting of my stock harness and zero new holes which I’m pretty happy with. 

Now the hard part. Making all the shrink wrap and loom look clean.

A49F2DBF-ED7C-45D6-BAD8-FC974EC0678B.jpeg

2083B7D0-E64F-4864-8F39-85B718993E2C.jpeg

4097DB47-83DA-4354-94C7-E1BB92531B42.jpeg

6A573A10-1DDB-40DC-B1C4-A2F1A2329C9D.jpeg

95178FD3-E591-4F47-A0BF-BA8FEDC4928B.jpeg

F1930BA7-661B-4513-938E-3FA435EF934C.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...