Jump to content
HybridZ

Recommended Posts

MODS: I apologize, should this be moved to Member Projects?

 

Unoriginal, I know. Blasphemous, for sure; wouldn't have it any other way.

 

I just wanted to pop in with the standard "Long time lurker" introduction. I've been trying to restore a Z for the past year and half, which has ballooned way over my head in what surprises a 40+ year old Datsun has in store for an unsuspecting hobbyist. It started off with buying a running, seemingly decent condition 280z which was to be a joint project for my girlfriend and me.

We were going to do right by the car, keep it simple and just restore it. As we started to peel back the layers, that all started to change.

 

 

 

 

Feb-April 2019

 

 

The car ran! Only had two owners, came with a lot of documentation and detailed sheet of when/what was done with all corroborating receipts. The guy literally tracked running hours on engine rebuild. It did start puffing a bit and he was forthcoming and stated it needed a head gasket.

IMG_20190302_163745.jpg.154329ec589789ea4fa9008e96af7d3d.jpg


 

 

 

We start cracking away and the next set of photos you're all familiar with....

IMG_20190310_121649.jpg.32e8acd0afca4bd43301c44f6278b0ce.jpg

 

 

IMG_20190311_180904.jpg.5e4d02c28a0c6c4af1112c257cbecee3.jpg

 

IMG_20190310_160516.jpg.6e0133b17759a39f24cb26ea75478cd8.jpg

 

IMG_20190311_180914__01.jpg.370305e8307d655d3724a87bcbe9901c.jpg

 

IMG_20190311_181520__01__01.thumb.jpg.cf03efbd2fe4ee3ae9c430b9bae4618e.jpg

 

We got a quote on rebuilding the head and it came out to over $1000 since the components are hard to come by or custom. Looking at engine options through Datsun Spirit, who are local, just destroyed so much of the budget. Especially now that we had to battle the unseen cancer... We just started to tear everything apart. Sadness ensued.

 

IMG_20190324_165920.jpg.9db46785a5267ad66bd834b750c42ad4.jpgIMG_20190312_173336.jpg.aa603da33fd02bbb9f8a0f9325c61150.jpgIMG_20190312_173002.jpg.47b118986db85493d0c5e39ca575272f.jpgIMG_20190312_170342.jpg.a3dbd1172317ab8364684e0b7248def2.jpg

 

The best part of the car

IMG_20190324_171523.jpg.4d354238eebfcce1079c6f2e5c819bb0.jpg

Edited by psyber_0ptix
Establish timeline
Link to comment
Share on other sites

May 2019

 

 

I was parting out my 450hp Miata at the time and bartered with a buddy who manages a body shop giving him my built block. Like any panicked owner, I bought all the things. Hopefully they could take care of things.

 

IMG_20190319_130117.jpg.6e19d2aebf9ff8c2a7b0892c198a36f5.jpgIMG_20190319_130102.jpg.9acfe7f7e2013834b1e2706238813dc2.jpgIMG_20190326_163310.jpg.d7923eb3e02e61e47ddd14d4e96c9036.jpgIMG_20190326_162841.jpg.37226e260fa7b4e5350833038427e136.jpgIMG_20190322_115613.jpg.1bb266bb0fefbd823cec2ef532563fcf.jpg

 

 

So we started to tear it down further and strip it to save on labor at the shop

 

 

IMG_20190330_163238.jpg.a9c8e25277092e99c2b95a7b07c183ac.jpg

 

IMG_20190330_164418.jpg.17e0612a694eca1ee7730c00b01b323b.jpg

 

IMG_20190330_171604_Bokeh.jpg.a6d146750aa450dd602eb7c478e53c9e.jpg

 

IMG_20190327_184612.jpg.c2eff7ca00ad42bdffc99099903b8a68.jpg

 

Packed it up and off to the body shop it went...

IMG_20190524_111610.jpg.32348f11a6153714e97acb462a91695a.jpg

 

IMG_20190528_183740.jpg.0e48b7a9188968d506f79853272cd493.jpg

Edited by psyber_0ptix
Link to comment
Share on other sites

July-September 2019

 

So a while passes and I ordered a roll bar and started hunting for used or rebuilt motors. I placed an order for an Aluminum Fuel Tank from a Z shop in Tampa with a 4 week lead time for a whopping $2,073. (Little did I know I fell into a trap and would never receive this tank, or my money back even to the time of this post  10 months later)

 

I happened on a Facebook Marketplace listing for a totaled 2013 Camaro SS, in the middle of nowhere South Carolina that was going for cheap. The young owner said he planned on rebuilding it but ended up getting a brand new one (must be nice!). Since it was sitting in the yard for so long, and he was away from home at a technical school 5 days a week, he just wanted to get rid of it. I talked the kid down to $2500 and had it towed up.

 

 

 

IMG_20190817_151655.jpg.699237736bc4ebf638dd0583e01c8716.jpg

 

IMG_20190817_173631.jpg.d96eda0aa9a22c71bf8b1a155f65e930.jpg

 

IMG_20190820_174040.jpg.03b63e70aa9f7668066d1499c47d217a.jpg

spacer.png

 

The intake manifold was gone so these heads were going straight to the machine shop. I also noticed that there were some aftermarket bits (TSP exhaust system from headers back) which allowed me to recoup some funds.

IMG_20190817_153816.jpg.57fc3464c5757fb23b4ba52e521173da.jpg

 

IMG_20190825_190021.jpg.5c644f065b065c24ec0ac5622ffdf55b.jpg

 

IMG_20190901_091924.jpg.d8d59409236b95084e44733e9f1e5a90.jpg

 

IMG_20190824_101358.jpg.851ba1d7f58bfe4e330a897fc28e4743.jpg

 

IMG_20190902_103212.jpg.009b9b847a1efbff5e09d2f395bb6a1c.jpg

 

 

 

All in all, after parting the Camaro out (including the heads) I ended up making back $1960 on my $2500 investment and came out with an LS3 shortblock for $590.

 

I then jumped on a set of TSP heads from a military dude that was suddenly relocating and saved about 25%. I still send them off to the machine shop to give them a once over.

IMG_20190818_205841__01.jpg.486077a2791bb3a1d493c2100ea0ebef.jpg

 

and I got cats...

IMG_20190810_201233.jpg.eb8a11281abf7d40575c7272a1ef6457.jpg

 

Koios (Kee-ohs)

IMG_20190820_184058_Bokeh.jpg.e0c73343f72b51dbc8db6dd71952fc8a.jpg

 

Theia

IMG_20190902_125643.jpg.428dd005d6a8af02c9c1cfec3e97c570.jpg

 

 

Edited by psyber_0ptix
Cats!
Link to comment
Share on other sites

December 2012

 

Because I've had so many turbo cars which ended up being so high strung and a bunch of cobbled high end aftermarket components, I wanted to go simple with this build. Jenvey ITB's came in.

79909033_10105317076902485_6646422497119961088_n.jpg.ca4a7c01cee1e91585aa085fb16fe785.jpg

 

 

 

Back at the body shop, the car just keeps getting worse and worse. The skirts on the front strut towers were so diminished it would blow holes through if trying to weld. It was paper thin.  We were just uncovering more and more interfaces of rust. Time to look for a new front clip!

IMG_20191210_120148.jpg.1284ece4fa71a335f6276c155795cc8a.jpgIMG_20191210_120145.jpg.a8528b296a4e0d7c7c66a3e41db9b5bf.jpgIMG_20191210_120126.jpg.b6392ff578ffc0f9804e0b4231b77850.jpgIMG_20191210_120058.jpg.7385e7dccf6d8688cc02e94d47da8ad3.jpg

 

 

 

IMG_20191210_121224.jpg

IMG_20191210_120038.jpg

IMG_20191210_120052.jpg

Link to comment
Share on other sites

January 2020

 

I found a front clip, attached to a '72 240z, kinda local going cheap. I decided to buy it and it came with a lot of extras!

 

1699812739_IMG_20200111_113537-Copy.jpg.b8d70c003c622e2dcf2622f3167ed9d5.jpg

 

 

 

IMG_20200111_113531.jpg.d82567631d8db45836d169a7a9dcb301.jpg

 

IMG_20200111_113526.jpg.334f1041878668fbab6126dcdfd806e3.jpg

 

IMG_20200111_113617.jpg.6b8b8b455c681c84169bc88d467b2d08.jpg

 

IMG_20200112_122655.jpg.abcedc7871c7cfb194b50c9172321e44.jpg

 

 

I ended up selling a lot of the extras and made well over the $800 I paid for everything. This would also become a fatal mistake later....

IMG_20200111_161105.jpg.31fad9df2c54a0cdd9eb51d469cf4f09.jpg

 

IMG_20200111_161042.jpg.16144718129d442d16fab5fe34d020fb.jpg

 

IMG_20200111_160043.jpg.03d927fe28d9d60bf3c349b75b277af2.jpg

 

IMG_20200111_155913__01.jpg.57fb5249ce1cb40bcf61320f57f88c27.jpg

 

IMG_20200111_155724.jpg.72d310b1da1d72c5e66f1915ad07eb98.jpgIMG_20200111_155719.jpg.74cce4e75403bacdb27be924222805de.jpg

 

IMG_20200111_155535.jpg.eba61dc59e5d568bbabea0868302aaa4.jpg

 

IMG_20200111_155513.jpg.f5224b83f55311fd0f6a24ad8fc9ae0c.jpgIMG_20200111_155343.jpg.8d6e5f64377285beb70c2b9f8b1eca50.jpg

 

IMG_20200111_154143.jpg.c9251b969f00dc9be0ef20290b02c66e.jpg

 

IMG_20200116_161511.jpg.228391e239b00cc824eaa94ff0726e28.jpg

 

IMG_20200111_162745.jpg.9afdfd993a57a55e0be6d671f35b6526.jpg

 

 

January 10th, 2020 I got word that the fuel tank I ordered August 2019 was going into production soon!

image.png.5ec40050fc936b6daa99df7c9612d5b0.png

 

Edited by psyber_0ptix
Link to comment
Share on other sites

February 2020

 

Finally getting back to more car things, a lot of stuff was purchased over the past couple months, especially from the Black Friday sales the prior November. Including gauges, a dash, Apex Engineered front/rear subframes and TTT front brakes. Among that stuff was a slew of Skillard items which made this

 

 

 

IMG_20200208_232205__01.jpg.9f8e1e9db9fd3f86905f4733ab37c35f.jpg

 

IMG_20200208_231319__01.jpg.33e41ad9a32f893bac92947f4ebd8003.jpg

 

Some minor modifications to allow wires to pass through

 

IMG_20200208_231037__01.jpg.7e5ae63324d3756445036181170d6906.jpg

 

IMG_20200208_232037__01.jpg.33b42f3918dd84a41f4cba199a92bb98.jpg

 

There was an issue though, the red from SpeedHut is uselessly dim. I had to request two more power inverters to power the large gauges individually and the 3 dash gauges as a set. I wish this was conveyed but it seems to be normal according to their customer service. It was literally dim IN THE DARK. There was just too large of a voltage drop to power the EL panel with so many gauges. Needle brightness for reference.

 

IMG_20200412_171638.jpg.f736581d27ff2c9333a96cd3bd6f41c6.jpg

 

IMG_20200412_172310.jpg.7ae38a40f21202a4922d788503f8bebb.jpg

 

Link to comment
Share on other sites

March 2020

 

A lot of work things happen, many trips. I got a call from the machine shop that the motor is completely ready, refreshed with new bearings, TSP Stage 3 cam, trunion bearing upgrade, new oil pump, and replacing some valves. The motor got a clean bill of health.

IMG_20200302_104005.jpg.9118d99b28b0a062a9eeaef88e240d9c.jpg

 

IMG_20200302_104009.jpg.6cb2bb6857c1c6230d0cbcdc1903c8ae.jpg

 

I've been searching around for rear disk conversions and wasn't really sure I was convinced of the options available. I was going to use the 370z rear wheel bearing ala ApexEngineered goodies, but ultimately no other kit fit that bolt pattern to the knuckle. If I were to keep a parking brake and have good brake balance, I had to do some reasearch, measuring, and calculating. I ordered a wheel bearing, a rotor hat and some brackets I found which might lend itself to developing a balanced rear kit.

 

IMG_20200402_185652.jpg.bc0dfd4783d6c341256831eb79ba9da0.jpg

 

 

 

I check in on the tank....yay, final fitment. I had been looking forward to this for half a year. It's not what I had in mind when the invoice said 4 weeks, 'maybe more.' But good to see things were moving along, a month at a time.

image.png.5c088cfc7ba094439fb3419ed752e06a.png

Edited by psyber_0ptix
Link to comment
Share on other sites

April 2020

 

 

In order to install the dash gauges in the 280z dash, I had to order the Mill House Houston gauge pods from Skillard. These are apparently easy peasy with tons of examples for the 240z dash, but it required some critical thinking for the 280z.

 

First the back of the dash had to be shaved so the flange of the Mill House pods would seat flush. In order to provide a compressive force to keep them pressed against the back of the dash, I employed the use of some PVC and strategic notches so the stock metal tabs will hold them in place.

 

IMG_20200404_125911.jpg.6cfd7f5462fbc9cad778ae3b50d4c4b0.jpg

 

IMG_20200404_125639.jpg.298dd92c0a11265aaa971dff855bb8eb.jpg

 

IMG_20200404_140424.jpg.521f24e71c3d2e263bd2dc6cf69f8375.jpg

 

IMG_20200404_140428.jpg.3ee3ee8ffb4e04fec7b3ff26d5fbcfb4.jpg

 

IMG_20200404_140334.jpg.086392d3cab5978ecbb3512d515c6041.jpg

 

 

IMG_20200404_140411.jpg.a2e01ee0e5a297d9acff17659fca688a.jpg

 

IMG_20200404_140342.jpg.16e5467c8a076ea5fe2cc4c8b2d6362b.jpg

 

IMG_20200404_143402.jpg.1380084ea8db9bfaeb8b40c1119247b8.jpg

 

IMG_20200404_143613.jpg.980aa5a91bd7c93529fa5c80411f31d6.jpg

 

 

 

 

I also started playing with the TTT front brake and 5 lug hub. I decided that lock washers were insufficient as on past cars, I've been used to safety wiring my rotor-hat bolts.

IMG_20200406_175916__01.jpg.6a4c51f8da952eb35ce14d54b4d50ba8.jpg

 

IMG_20200406_192910.jpg.e29668ee2f04707c05f3ca39b50124a4.jpg

 

The huge bolt heads made it difficult to tighten the rotors to the hubs and apply any even torque. No socket would fit. It's really best suited for socket cap screws.IMG_20200408_081212.jpg.7d76457e7a379ae685c021683d599fa1.jpg

IMG_20200410_124752.jpg.7774501c3a052f3e9cd0a2e93d579e22.jpgIMG_20200410_124727.jpg.73b2e6cc883cc9f1dfb54f4fb629731e.jpg

 

IMG_20200410_130225.jpg.e73707c56a301aabebcb97aa2ab9c826.jpg

 

 

While we're on the topic of brakes....the rear setup is slowly coming together. Measuring offsets, bolt patterns and checking clearance.

IMG_20200410_111751.jpg.29650aca60445c7e894f1bb04aae19fb.jpg

 

Seems to fit behind a 16x9.5 et0 with some room to spare. 12.19" rotor

IMG_20200410_131605.jpg.2c9024c1623203465679e0dc2b42ae68.jpg

 

IMG_20200410_131652.jpg.4d86e6d38c42bf5f87e489e2a87b8e75.jpg

 

Next just need to create the bracket that will interface with the ApexEngineered stuff. It goes through several iterations and some FEA to see if it's strong enough (using a 1.4G stop as a reference)

 

IMG_20200421_190712.jpg.c395fcaae652c679fe30a6f3d4826e55.jpg

 

3D printed and test fitted. It works!

 

IMG_20200427_150522.jpg.33a7395c2b783f6855c3e8489d1b45bc.jpg

 

IMG_20200427_151944.jpg.0b55c383af9e176b278ae6a4211a7a3f.jpg

 

Made a provision for an M12 hall sensor to be used to pickup the 8 rotor bolts for VSS or traction control input

IMG_20200427_152323.jpg.66a85ba16f4f188d10ae46318f34a75b.jpg

 

IMG_20200427_151754_Bokeh__01.jpg.c5806b0ac4c32ccaaa3c0776ade6a420.jpg

 

 

IMG_20200427_153747_Bokeh.jpg.8c33feb102fd1327bd0c14b8d5781855.jpg

 

 

Back at the body shop, some bad news....the executive decision has been made to retire the 280z shell. It was a year long battle and it turns out the 240z 'spare' was in better shape. Now I have to transfer the tags from the 280 to the 240. We're keeping the 280 in case there are odds/ends that need to be cut or transferred over.

 

Goodbye 280z

IMG_20200502_120856.jpg.dbde75bf234b954dfe149171ee78e9ab.jpgIMG_20200502_120901.jpg.c3c56130cbc7ff76f59e61b02c3925cf.jpg

 

Hello 240z!

 

IMG_20200502_130208.jpg.9a63f120f7658f5b224de780470d7b3a.jpgIMG_20200502_130158.jpg.179c0701c088d3f675ac06733a35bd30.jpgIMG_20200502_130145.jpg.073061a9598eef859f45d29f02c19d48.jpgIMG_20200502_130139.jpg.c6027b0c5191e497962eae70c352a73f.jpg

 

Sadly, as indicated in the previous posts, I sold many of the high dollar 240z items and now have to scrap this car together as best I can. $6k down the hole. But wait, there's more! The roll bar doesn't fit the 72 chassis, neither does the aluminum fuel tank previously ordered and there are some small nuances with the Apex items. Not only that, the dash that I have lined up and loaded with gauges is still of the 280z variety. Ugh.

 

I called up the shop in Tampa and they were happy to transfer the funds toward a 240z tank. He said it was in stock on the shelf but he'd need a week or two to get the fuel sender and pump together. Great!

 

Ohm at ApexEngineered has been the most communicative in my exploration to develop some things for my Z and has been super helpful throughout the year. He gladly agrees to revise the order to reflect a 240z setup instead of the 280z. Great!!

 

I sold the roll bar, and ended up committing to the 280 dash in the 240 and with some small modification to brackets, it fits fine.

 

 

Edited by psyber_0ptix
Link to comment
Share on other sites

May 2020

 

Just trying to patch things here and there on the 240z; little movement so far. I wasn't all too keen on how the guy helping out was handling the frame rail refit. The front end also looked tweaked based on the dimples on the upper Fender/Hood support.

IMG_20200523_124054.jpg.dc2464c7bb8375f8ae38158f14876d4d.jpg

 

The 280z dash frame fit so I was happy about that

IMG_20200523_104057.jpg.c450098f9c2db7d29909367445aa728f.jpg

 

Took a couple more measurements for a new roll bar to be built. Again, AGI has amazing customer service and I wanted to utilize their talents

IMG_20200523_100757.jpg.106334a5f8edfc6899136454b2190dd4.jpg

 

I started questioning how square everything was and decided to take this into my own hands. I was going to use the ApexEngineered front subframe to jig new rails and let the body dude take care of the body. Look at that radiator support/frame rail on the passenger side. It's pushed inward about an inch. No thanks.

IMG_20200530_112014.jpg.b1922734a052b92b631015f8e87e5fd1.jpgIMG_20200530_112007.jpg.a8d41b1fea37fe0eae49da16b4470b3f.jpg

 

Removed all sub-frames

IMG_20200530_130304.jpg.137d97c8b6c8cccc3fe0dc685d0920b8.jpg

 

 

Reached out about my fuel tank. No response. This is where things have started to go south.

image.png.a85e98bef6680223b041bb691167caf2.png

Edited by psyber_0ptix
Link to comment
Share on other sites

June 2020

 

I'm super excited to receive my ApexEngineered front subframe. I bought some metal and began hacking away and blob welding things together. It's pretty bad, but no worse than what I saw at the body shop 🤣

 

Using one of the frame rail replacements as a reference, I marked out critical locations with a soap marker.

IMG_20200615_170951__01.jpg.a9af3379c4396e3dbb2a9573e5947334.jpg

 

To create the little alcove for the subframe mount, I just notched a wider section of the square tube.

IMG_20200615_184802.jpg.491b73edf9d96afd2ead7028da0d1116.jpg

 

Tried to remove the mill scale as best as I could

IMG_20200617_134446.jpg.e7845f560f9b16b93a72b772097eb90e.jpg

 

Learning how to mig weld

IMG_20200617_224603.jpg.7e2d5ad6e1d8b12771c58c70ae0ea2f4.jpg

 

IMG_20200617_224838__01.jpg.503801aabba22f440476d79cd37c3c0d.jpg

 

image.jpeg.6929225ca10f1bcfd6b7f54dfbf896ad.jpeg

 

 

 

 

I started to jig the rails together using 25" 1x1 square tube to keep them square and parallel

IMG_20200618_180314.jpg.51bca41ff8f814e88b0be62b19c016e4.jpg

 

Checking fitment to what will be the front lower rad support

IMG_20200619_112301.jpg.3c7795ae0930d26fc16aaf0043d57911.jpg

 

And the subframe as reference for where to drill and later where to place the TC mount cups.

IMG_20200619_112420.jpg.7b8b1e8523459f280da6f4f1bd46bf9f.jpg

 

It's ugly, but I'll take ownership. I'm still learning.

IMG_20200619_154920_Bokeh.jpg.700b29455d3d3c8da3da5adc02f18cfb.jpg

 

To figure out how to reinforce the sway bar mounts and the tie-down/tow hooks, I got some angle iron that would nest inside the square tube. Marking the locations on the frame rails, I indicated spots to drill for the nuts on the angle.

IMG_20200619_180756.jpg.7727da2338daa72efce0ee68662a123f.jpg

 

Frame rails look like swiss cheese as I made more holes to plug weld the angle Iron in place.

IMG_20200619_180841.jpg.e8189e64f2b0dddb0ef1e57d5072c5ed.jpg

 

Bolted the angle in place

IMG_20200619_181426.jpg.c4271df646288ad1dd11f328b3b4d9ee.jpg

 

Plug welded

IMG_20200619_183839.jpg.8a032a1854daaa762161a5400514dfa9.jpg

 

Now I have a threaded hole!

IMG_20200619_183908.jpg.2e5fe275a549f791f72698011f813e3c.jpg

 

 

Almost there! Just have to repeat on the driver side.

IMG_20200621_175922__01.jpg.73228a26c3100526246a5cadfe5767c8.jpg

 

At this point I've requested a refund from the shop in Tampa. Sadly after discovering a Facebook Group on all the negative dealings with the merchant, I have little faith that I will ever see my money, or the tank I paid for. I was admittedly naive and trusted the reviews (which are presumed baited/paid for). That takes a huge bite out of my budget and Paypal has a strict 180 day buyer protection policy, and the credit card company is also being vague about any possibility of processing a reverse transaction.

image.png.3f2edf9866666ca6a5666bb53bcf3ca1.png

 

 

 

 

Edited by psyber_0ptix
added additional subframe picture
Link to comment
Share on other sites

I sent a set of vents to Trackspec Motorsports and they developed a set of replacements. Fits pretty well! The lower flange could have been a bit wider, but that area could be painted black or covered with gasket. They use the stock mount locations, but also have some additional for support around the perimeter. It shipped with black rivets. Hopefully there will be more movement on the rust repair/body soon. Damn Covid19

 

IMG_20200623_152026.jpg.6c754e2f0aee6d3da4aa7d75d4ecbe64.jpg

 

IMG_20200623_151423.jpg.9bf06d8f3040eedb658a7adb8d299eb2.jpg

 

IMG_20200623_151428.jpg.c644ec30f0f8f9bb1ab04cf301c0aacc.jpg

Link to comment
Share on other sites

Sheesh, what an ordeal!  You seem to be taking it very well, if someone had ripped me off for $2k I'd be driving out to see him with a baseball bat.

Unfortunately, if you don't know where to look for the rust in these cars it is easy to miss it but I bet you won't ever make that mistake again🤑

Those are ambitious plans you have for the engine and suspension, I hope you will continue to update this thread as I'm sure there are many of us that would love to see how she turns out.

Cheers

Link to comment
Share on other sites

On 7/8/2020 at 4:35 PM, rturbo 930 said:

So what was wrong with the 280Z shell that you decided to use a 240Z shell that had been in an accident + needed a bunch of stuff bought for it? It didn't look that bad. 

Based on the bartered price for the help of the body shop, and the amount of time it would take to correct the front end of the 280z, it was just easier to 'start' with the 240. That being said, I hope I can resurrect the 280z on my own time as I learn through this process. It's hard to capture but it definitely looked fine, but as you peek away the undercoating, it's just flake. Sanding back to add metal, just opens holes wider and wider because the metal has become paper thin. It's a good candidate for anyone who want's to tube the front end. I don't have a tube bender, nor a garage of my own (sadly I can't build one due to zoning).

 

 

 

 

 

 

On 7/8/2020 at 5:40 PM, grannyknot said:

Sheesh, what an ordeal!  You seem to be taking it very well, if someone had ripped me off for $2k I'd be driving out to see him with a baseball bat.

Unfortunately, if you don't know where to look for the rust in these cars it is easy to miss it but I bet you won't ever make that mistake again🤑

Those are ambitious plans you have for the engine and suspension, I hope you will continue to update this thread as I'm sure there are many of us that would love to see how she turns out.

Cheers

It's a 12-15 hour drive away, and no guarantee he will even be there. Plus, I've tried to offer a amicable settlement simply requesting a refund multiple times. I've never been so burned from a car community member, but I suppose it's just a matter of time. Everyone has a story about a shop or a guy, this just happens to be mine. From what it appears, I got off easy losing $2k. Others have had their cars stuck at the shop for years, burned 10's of thousands of dollars for sub par service and products. If you ever search on FB or through NICO forums, the phrase "I can't believe he's still in business." Keeps cropping up.

 

Since all I got was radio silence, I'll just have to accept what the credit card companies decide to do with their investigation.

Edited by psyber_0ptix
spelling
Link to comment
Share on other sites

  • 4 weeks later...

Finally got around to dig into the Datsun. The quality of the AGI cage is awesome. It's no joke when they say it's a two person job. I'm going to have to cut the mounts free to fidget with the bar since the halo cross bar interferes with the roof. Otherwise, a pretty involved installation for an individual but I think I can get it to work. 

 

Update 8/8/2020: The windshield bar was found to be too high, they offered to rebend it and send me a new billet ends to try to cut to fit.

IMG_20200725_154314.jpg.35377460d2cc10a1535586fa695aed00.jpg

 

 

 

 

 

I toyed around with creating a new dash emblem. I built out the MMU2S for my Prusa i3Mk3s to handle multi-colored printing. The resolution on my 3D printer isn't that good, so I guess it'll be something to get machined. 

IMG_20200727_183434.jpg.6195e156f2ada69fb67cd049234f0c74.jpg

 

Screenshot_20200725-155652.jpg.ca79feb273d6b727c7060a873f365eb8.jpg

 

IMG_20200728_130338_893.thumb.jpg.d9241ee3553094cab3dcec45aab68850.jpg

 

 

 

Picked up a 370z front knuckle to take some measurements. Building out a brake kit to balance the rears. 

 

IMG_20200713_164349.jpg.2319e50aa27bcb6c8c72be55d421ecd5.jpg

 

Much like last time, I tried to utilize as much off-the-shelf Wilwood parts. This uses the same rotor hats as the rear kit and once again, just needs an adapter between the 370z mounting tabs and the wilwood lug/radial bracket. I think it'll work!

 

signal-2020-07-30-192249.png.393277346d73457ec3d02f76aa5c2860.png

 

 

PhotoGrid_1596161594035.jpg.3e78e4539f84eb8574bef206842b67bc.jpg

 

Sadly, I don't have the parts to mock up yet and waiting for apexengineered to finalize some things before I can make amendments before committing to purchasing the parts. I'll also try to model up the Forged Internal Superlite calipers also found on T3/Silvermine/Arizona Z Car brake kits. They use a 7420 padshape which is easier to find compounds for than the 7416 of the billet narrow superlites, but at the cost of less wheel clearance and being lug mounted. I think I prefer the radial mount overall. 

 

Hopefully more updates over the weekend.

Edited by psyber_0ptix
roll bar update
Link to comment
Share on other sites

Decided to integrate the radial bracket to the adapter so it's one piece. Printed off to check fitment. I don't have any M14 bolts to check how well the 3D printed threads were made, but it seems to fit the 370z tab spacing just fine.

 

When made, it will take a wilwood bracket-stud kit which is 3/8-16 on the bracket end, and 3/8-24 on the caliper side. Then the Forged Narrow Superlite 6 pot caliper slides right on.

 

117158260_10105952361996065_7362924361399995164_n.jpg.0ef3d80b40accf749748b029ef33df4f.jpg

 

 

117108159_10105952362160735_2506955199478120558_n.jpg.7d787ab7dd9808272ead0dd899e22e1d.jpg

 

Link to comment
Share on other sites

Some progress on the front brakes. The rotor is spec'd for 1.1" thickness but I only had a 0.81" laying around. Same rotor hat in use so the clearance to the "pad" indicates it should fit fine with the full thickness of rotor. Radial distance seems to be spot on. 

 

Comparison made between the Forged Narrow Superlite caliper (red) and the Forged Internal Superlite used in T3/ArizonaZCar/Silvermine kits. You can see the difference in width which should help with any clearance woes. Same piston area so they should be compatible. If you want to run larger diameter rotors in the future, you only need to shim the caliper instead of coming up with a new bracket. Yay for being modular! 

 

IMG_20200807_190746.jpg.931e4fa1743b8cab9dca976f50c1c845.jpg

 

IMG_20200807_191459__01.jpg.84b42b985c98d6c2830bebfcd83dfbcb.jpg

 

IMG_20200807_190920.jpg.3baa5003604be6c80d42a6ea9d99e5e3.jpg

 

IMG_20200807_190807.jpg.9336bc6674acf1031f73f074cd006295.jpg

 

 

IMG_20200807_191027__01.jpg.8909efa8cdaa4f1a7622f4645be1219e.jpg

 

PhotoGrid_1596843461393.jpg.3003b258288af18375a58fe8319bb1a4.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...