Jump to content
HybridZ

Mystery Arizona Zcar "Bosch" Injectors


tomr240zap

Recommended Posts

Some time back in my engine build I ordered new set of "440cc Bosch Injectors" from Arizona Z Car

 

Skip forward in time about 5 years and I'm in the process of tuning my (240z) L28et swap with MS2 (V3.57).  Using PWM (30%) as the injectors are square in the middle of the low-z range at ~2.8-3.0 ohms resistance.  All other critical settings per Megasquirt "starting point" recommendations.  The car idles with some tweaking of parameters, but AFR is way out of sorts and i'm at a point in my troubleshooting where i'm beginning to question the validity of this flow claim...

 

In trying to ID these injectors, the only numbers I can see on the injector bodies are "751" and "927".

These numbers don't match any low-impedance injectors that i can find in the Bosch fuel injector catalog.

 

The only Bosch injectors that fall into this resistance range is the 0280150834 and 0280150835 (EV1) which only flow ~350ish.


Next step was to "massage" the 'required fuel' value in tuner studio to match what I need, but would like to first confirm my theory.

I have an email in to Arizona Z-car but haven't received a response.
Does anyone else have experience with these AZC injectors or can attest to the 440cc claim?


Thanks!

-Tom

inj2.JPG

inj.JPG

440cc.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...