Jump to content
HybridZ
Sign in to follow this  
AydinZ71

Checking fitment for an LSD center-section

Recommended Posts

Hi all!

 

I am about to pull the trigger on this unit. It is a stock S15 type-R (JDM) center section. I currently have a stock R200 3.545 open diff from a 280z, with 280z half-shafts installed on a series 1 240z. Can anyone verify that my 280z halfshafts will slide right into this unit once installed? I am prepared to address the M10 vs M12 bolt issue, and already have a source for sleeve stock. Thanks so much for your help!!

 

https://www.ebay.com/itm/Nissan-silvia-S15-Helical-LSD-HLSD-also-Fits-S14-S13/324250818322?hash=item4b7edad712:g:esEAAOSwJgRfKcvn

Edited by AydinZ71

Share this post


Link to post
Share on other sites
Just now, AydinZ71 said:

Hi all!

 

I am about to pull the trigger on this unit. It is a stock S15 type-R (JDM) center section. I currently have a stock R200 3.545 open diff from a 280z, with 280z half-shafts installed on a series 1 240z. Can anyone verify that my 280z halfshafts will slide right into this unit once installed? I am prepared to address the M10 vs M12 bolt issue, and already have a source for sleeve stock. Thanks so much for your help!!

 

https://www.ebay.com/itm/Nissan-silvia-S15-Helical-LSD-HLSD-also-Fits-S14-S13/324250818322?hash=item4b7edad712:g:esEAAOSwJgRfKcvn

 

PS: this is for the SCCA car to keep it group EP. The L28et 71' will still be getting Wlad's super 8.8 swap. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...